Swap não esta ativa no Ubuntu 12.04, ajuda para ativa [RESOLVIDO]

Sidiclei escreveu:

....

Usei Gedit para altera a UUID, apertei no fecha ele perguntou se queria salva, dei OK

Veja como ficou:http://i49.tinypic.com/9fmq89.png

Logo em seguida $sudo mount -a não funcionou, então usei os outros comandos $ sudo swapon /dev/sdb6 e
$ sudo mount -a
Resultado montou, mas quando reinicia ela tá inativa novamente, não monta automatico

edps escreveu:



tá vendo aquela última linha na imagem:

/dev/mapper/cryptswap1 none swap sw 0 0

deixe-a assim:

### Não sei o que isso faz, portanto não invento!
### /dev/mapper/cryptswap1 none swap sw 0 0

Assim... tirando os comentários existentes no arquivo, em seu fstab existiram somente 4 linhas.

#########################

É tudo muito bonitinho mostrar imagens, mas acho bem mais interessante postar é os logs, o que facilita na hora de montarmos alguma coisa: diferente de ter que abrir uma aba de navegador > decorar parte do texto > voltar a outra aba, digitar o texto > e ficar nesse vai-e-vem infernal de abas! rsrs, para tal e como exemplo:

1. listando o fstab:

$ cat /etc/fstab

Daí o Sr. poria a saída do comando num campo aqui assim:

(code)
TODO O TEXTO
(/code)

Substitua os PARÊNTESES ( ) PELOS COLCHETES [ ]


Outros arquivos pro seu caso:

2. UUIDS das partições.

$ ls -al /dev/disk/by-uuid/

ou seu equivalente mais pobre:

$ sudo blkid


3. Grub.

$ cat /boot/grub/grub.cfg

e

$ cat /etc/default/grub

sidiclei@SSMassociados:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=634c2477-e840-4147-95e3-6df6f2369e31 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda7 during installation
UUID=db5c13da-3821-494d-ab1f-95743fcd572c /home ext4 defaults 0 2
# swap was on /dev/sdb6 during installation
UUID=1ee1edd8-63f2-4e11-97b8-ead446be930bc none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
sidiclei@SSMassociados:~$

 sidiclei@SSMassociados:~$ ls -al /dev/disk/by-uuid/

total 0

drwxr-xr-x 2 root root 200 Out 15 02:38 .

drwxr-xr-x 5 root root 100 Out 15 02:38 ..

lrwxrwxrwx 1 root root  10 Out 15 05:39 1E749B69749B4287 -> ../../sdb3

lrwxrwxrwx 1 root root  10 Out 15 05:39 1ee1edd8-63f2-4e11-97b8-ead46be930bc -> ../../sdb6

lrwxrwxrwx 1 root root  10 Out 15 05:39 22FAC6C1FAC69089 -> ../../sdb1

lrwxrwxrwx 1 root root  10 Out 15 05:39 360EC2100EC1C8D7 -> ../../sdb2

lrwxrwxrwx 1 root root  10 Out 15 05:39 45EA3C0C542E25E8 -> ../../sda2

lrwxrwxrwx 1 root root  10 Out 15 05:39 634c2477-e840-4147-95e3-6df6f2369e31 -> ../../sdb5

lrwxrwxrwx 1 root root  10 Out 15 05:39 7C1D3C8E35516F97 -> ../../sda1

lrwxrwxrwx 1 root root  10 Out 15 05:39 db5c13da-3821-494d-ab1f-95743fcd572c -> ../../sdb7  

sidiclei@SSMassociados:~$ sudo blkid
[sudo] password for sidiclei:
/dev/sda1: UUID="7C1D3C8E35516F97" TYPE="ntfs"
/dev/sda2: UUID="45EA3C0C542E25E8" TYPE="ntfs"
/dev/sdb1: UUID="22FAC6C1FAC69089" TYPE="ntfs"
/dev/sdb2: UUID="360EC2100EC1C8D7" TYPE="ntfs"
/dev/sdb3: UUID="1E749B69749B4287" TYPE="ntfs"
/dev/sdb5: UUID="634c2477-e840-4147-95e3-6df6f2369e31" TYPE="ext4"
/dev/sdb6: UUID="1ee1edd8-63f2-4e11-97b8-ead46be930bc" TYPE="swap"
/dev/sdb7: UUID="db5c13da-3821-494d-ab1f-95743fcd572c" TYPE="ext4"
sidiclei@SSMassociados:~$

sidiclei@SSMassociados:~$ cat /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
set locale_dir=($root)/boot/grub/locale
set lang=pt_BR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, com Linux 3.2.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux /boot/vmlinuz-3.2.0-32-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-32-generic (modo de recuperação)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
echo 'Carregando Linux 3.2.0-32-generic ...'
linux /boot/vmlinuz-3.2.0-32-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /boot/initrd.img-3.2.0-32-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, com Linux 3.2.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux /boot/vmlinuz-3.2.0-31-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-31-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-31-generic (modo de recuperação)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
echo 'Carregando Linux 3.2.0-31-generic ...'
linux /boot/vmlinuz-3.2.0-31-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /boot/initrd.img-3.2.0-31-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux /boot/vmlinuz-3.2.0-30-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-30-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-30-generic (modo de recuperação)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
echo 'Carregando Linux 3.2.0-30-generic ...'
linux /boot/vmlinuz-3.2.0-30-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /boot/initrd.img-3.2.0-30-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-29-generic (modo de recuperação)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
echo 'Carregando Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux /boot/vmlinuz-3.2.0-27-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-27-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-27-generic (modo de recuperação)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
echo 'Carregando Linux 3.2.0-27-generic ...'
linux /boot/vmlinuz-3.2.0-27-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /boot/initrd.img-3.2.0-27-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux /boot/vmlinuz-3.2.0-26-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-26-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-26-generic (modo de recuperação)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
echo 'Carregando Linux 3.2.0-26-generic ...'
linux /boot/vmlinuz-3.2.0-26-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /boot/initrd.img-3.2.0-26-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, com Linux 3.2.0-23-generic (modo de recuperação)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
echo 'Carregando Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=634c2477-e840-4147-95e3-6df6f2369e31 ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set=root 634c2477-e840-4147-95e3-6df6f2369e31
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 22FAC6C1FAC69089
chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

sidiclei@SSMassociados:~$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

edps escreveu:

Pelo que foi aprersentado em seus logs, você ainda não removeu ou comentou a linha abaixo no fstab:

/dev/mapper/cryptswap1 none swap sw 0 0

Eu não sei para que serve por isso a sugestão de deixá-la ao menos comentada.

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=634c2477-e840-4147-95e3-6df6f2369e31 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda7 during installation
UUID=db5c13da-3821-494d-ab1f-95743fcd572c /home ext4 defaults 0 2
# swap was on /dev/sdb6 during installation
UUID=1ee1edd8-63f2-4e11-97b8-ead446be930bc none swap sw 0 0

clodoaldops escreveu:

-vc já tentou excluir essa swap, deixar como não alocada e depois recriar a partição swap no mesmo local?

Sidiclei escreveu:

Obrigado a todos que tentaram me ajuda !!!

Pessoal de outro fórum resolveu o problema.

Quem quiser ver como foi a solução: http://www.hardware.com.br/comunidade/montanda-swap/1263368/

clodoaldops escreveu:

marque como resolvida