Problema na configuracao do wpa_supplicant

renato_pacheco
(usa Debian)

Enviado em 20/10/2015 - 16:41h

Calma, cara, vamos tratar os erros passo-a-passo. Primeiro, vamos tentar resolver esse erro ae pra depois fazermos os testes novamente, ok? Quando vc colocou o arquivo lá no diretório /lib/firmware, as mensagens no dmesg sumiram? Eu preciso dessa informação para continuarmos os testes.
--
Renato Carneiro Pacheco
Certificado Linux LPIC-1
Especialista em Segurança em Redes de Computadores
Graduado em Redes de Comunicação

http://br.linkedin.com/in/renatocarneirop
http://www.facebook.com/renatocarneirop

"Não acredite no que eu digo, pois é a minha experiência e não a sua. Experimente, indague e busque." - Osho Rajneesh

xiloba
(usa Slackware)

Enviado em 21/10/2015 - 17:50h

Não, Renato. Continua dando a mensagem. Eu já vou postá-la.

renato_pacheco
(usa Debian)

Enviado em 22/10/2015 - 08:46h

Ok, olhando melhor, percebi q ele procura dentro d 2 subpastas: b43 e b43-open. Então, copie a firmware para dentro deles, assim:

cp ucode15.fw /lib/firmware/{b43,b43-open}

 

E veja se a mensagem sumiu.
--
Renato Carneiro Pacheco
Certificado Linux LPIC-1
Especialista em Segurança em Redes de Computadores
Graduado em Redes de Comunicação

http://br.linkedin.com/in/renatocarneirop
http://www.facebook.com/renatocarneirop

"Não acredite no que eu digo, pois é a minha experiência e não a sua. Experimente, indague e busque." - Osho Rajneesh

xiloba
(usa Slackware)

Enviado em 22/10/2015 - 08:59h

OI, Renato.
Eu fiz como você mandou.
cp ucode15.fw /lib/firmware/{b43,b43-open}
cp: o alvo "/lib/firmware/b43-open" não é um diretório

Então, eu pensei, é melhor colocar o comando pelo menos do b43, depois eu vejo onde está o b43-open. Por isso, digitei:
bash-4.1# cp ucode15.fw /lib/firmware/{b43}

Mas continua dando mensagem de erro, olha só o final da saída do comando dmesg:

[ 64.353663] EXT4-fs (sda6): re-mounted. Opts: commit=600
[ 222.706053] lo: Disabled Privacy Extensions
[ 380.394870] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 380.394874] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 380.394876] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 380.410120] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 380.410127] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 380.410131] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.

removido
(usa Nenhuma)

Enviado em 22/10/2015 - 09:09h

1 - O drive wext está depreciado. Use nl80211. Precisa ajustar esse drive no script.

2 - Porque está subindo o serviço na mão?

os scripts em /etc/rc.d/rc.wireless e /etc/rc.d/wireless.conf existem para isso.

3 - Ajustou as configurações em /etc/rc.d/rc.inet1.conf?

xiloba
(usa Slackware)

Enviado em 22/10/2015 - 09:41h

Oi, Kytoy.
Eu devo baixar o nl80211?
Como ajustar o drive no script?

Aqui vai a cópia do meu /etc/rc.d/rc.inet1.conf

# /etc/rc.d/rc.inet1.conf
#
# This file contains the configuration settings for network interfaces.
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
# If you don't have an interface, leave the settings null ("").

# You can configure network interfaces other than eth0,eth1... by setting
# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
# or empty, it is assumed you're configuring eth<interface>.

# Several other parameters are available, the end of this file contains a
# comprehensive set of examples.

# =============================================================================

# Config information for eth0:
IPADDR[0]=""
NETMASK[0]=""
USE_DHCP[0]="yes"
DHCP_HOSTNAME[0]=""

# Config information for eth1:
IPADDR[1]=""
NETMASK[1]=""
USE_DHCP[1]=""
DHCP_HOSTNAME[1]=""

# Config information for eth2:
IPADDR[2]=""
NETMASK[2]=""
USE_DHCP[2]=""
DHCP_HOSTNAME[2]=""

# Config information for eth3:
IPADDR[3]=""
NETMASK[3]=""
USE_DHCP[3]=""
DHCP_HOSTNAME[3]=""

# Default gateway IP address:
GATEWAY=""

# Change this to "yes" for debugging output to stdout. Unfortunately,
# /sbin/hotplug seems to disable stdout so you'll only see debugging output
# when rc.inet1 is called directly.
DEBUG_ETH_UP="no"

## Example config information for wlan0. Uncomment the lines you need and fill
## in your info. (You may not need all of these for your wireless network)
#IFNAME[4]="wlan0"
#IPADDR[4]=""
#NETMASK[4]=""
#USE_DHCP[4]="yes"
#DHCP_HOSTNAME[4]="icculus-wireless"
#DHCP_KEEPRESOLV[4]="yes"
#DHCP_KEEPNTP[4]="yes"
#DHCP_KEEPGW[4]="yes"
#DHCP_IPADDR[4]=""
#WLAN_ESSID[4]=BARRIER05
#WLAN_MODE[4]=Managed
##WLAN_RATE[4]="54M auto"
##WLAN_CHANNEL[4]="auto"
##WLAN_KEY[4]="D5AD1F04ACF048EC2D0B1C80C7"
##WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
#WLAN_WPA[4]="wpa_supplicant"
#WLAN_WPADRIVER[4]="ndiswrapper"

## Some examples of additional network parameters that you can use.
## Config information for wlan0:
#IFNAME[4]="wlan0" # Use a different interface name nstead of
# the default 'eth4'
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
#MTU[4]="" # The default MTU is 1500, but you might need
# 1360 when you use NAT'ed IPSec traffic.
#DHCP_KEEPRESOLV[4]="yes" # If you dont want /etc/resolv.conf overwritten
#DHCP_KEEPNTP[4]="yes" # If you don't want ntp.conf overwritten
#DHCP_KEEPGW[4]="yes" # If you don't want the DHCP server to change
# your default gateway
#DHCP_IPADDR[4]="" # Request a specific IP address from the DHCP
# server
#WLAN_ESSID[4]=DARKSTAR # Here, you can override _any_ parameter
# defined in rc.wireless.conf, by prepending
# 'WLAN_' to the parameter's name. Useful for
# those with multiple wireless interfaces.
#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
# Some drivers require a private ioctl to be
# set through the iwpriv command. If more than
# one is required, you can place them in the
# IWPRIV parameter (separated with the pipe (|)
# character, see the example).

renato_pacheco
(usa Debian)

Enviado em 22/10/2015 - 10:21h

Eu apostaria ainda no lance da firmware, só tá faltando ajustar ae. Precisa saber o q tem dentro do diretório /lib/firmware.
--
Renato Carneiro Pacheco
Certificado Linux LPIC-1
Especialista em Segurança em Redes de Computadores
Graduado em Redes de Comunicação

http://br.linkedin.com/in/renatocarneirop
http://www.facebook.com/renatocarneirop

"Não acredite no que eu digo, pois é a minha experiência e não a sua. Experimente, indague e busque." - Osho Rajneesh

xiloba
(usa Slackware)

Enviado em 22/10/2015 - 22:50h

Oi, Renato, aqui vai amostra do que tem dentro do arquivo
bash-4.1# cd /lib/firmware/
bash-4.1# ls
3CCFEM556.cis ipw2200-sniffer.fw
3CXEM556.cis iwlwifi-100-5.ucode
3com iwlwifi-1000-3.ucode
BCM-LEGAL.txt iwlwifi-3945-1.ucode
BCM2033-FW.bin iwlwifi-3945-2.ucode
BCM2033-MD.hex iwlwifi-4965-1.ucode
COMpad2.cis iwlwifi-4965-2.ucode
COMpad4.cis iwlwifi-5000-1.ucode
DP83903.cis iwlwifi-5000-2.ucode
E-CARD.cis iwlwifi-5000-5.ucode
LA-PCM.cis iwlwifi-5150-2.ucode
LICENSE.ipw2100-fw-1.3 iwlwifi-6000-4.ucode
LICENSE.ipw2200-fw iwlwifi-6000g2a-5.ucode
LICENSE.ralink-firmware-RT2860_Firmware_V26.txt iwlwifi-6000g2b-5.ucode
LICENSE.ralink-firmware-RT2870_Firmware_V22.txt iwlwifi-6050-5.ucode
LICENSE.ralink-firmware-RT61_Firmware_V1.2.txt kaweth
LICENSE.ralink-firmware-RT71W_Firmware_V1.8.txt keyspan
MT5634ZLX.cis keyspan_pda
NE2K.cis korg
PCMLM28.cis matrox
PE-200.cis mts_cdma.fw
PE520.cis mts_edge.fw
RS-COM-2P.cis mts_gsm.fw
STLC2500_R4_00_03.ptc myricom
STLC2500_R4_00_06.ssf ositech
STLC2500_R4_02_02_WLAN.ssf qlogic
STLC2500_R4_02_04.ptc r128
WHENCE radeon
acenic rt2561.bin
adaptec rt2561s.bin
advansys rt2661.bin
atmsar11.fw rt2860.bin
av7110 rt2870.bin
bnx2 rt73.bin
bnx2x sb16
cis sun
cpia2 tamarack.cis
cxgb3 tehuti
dabusb ti_3410.fw
dsp56k ti_5052.fw
e100 tigon
edgeport tr_smctr.bin
emi26 ttusb-budget
emi62 ucode15.fw
ess vicam
intelliport2.bin whiteheat.fw
ipw2100-1.3-i.fw whiteheat_loader.fw
ipw2100-1.3-p.fw yam
ipw2100-1.3.fw yamaha
ipw2200-bss.fw zd1211
ipw2200-ibss.fw

pulgovisk
(usa Gentoo)

Enviado em 23/10/2015 - 08:12h

O comando

Tem certeza que não é :
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf -D wext -B ?

renato_pacheco
(usa Debian)

Enviado em 23/10/2015 - 08:55h

Perceba q não existe a pasta b43 e nem a pasta b43-open. Tente criar pelo menos a pasta b43 e copie a firmware dentro dela.
--
Renato Carneiro Pacheco
Certificado Linux LPIC-1
Especialista em Segurança em Redes de Computadores
Graduado em Redes de Comunicação

http://br.linkedin.com/in/renatocarneirop
http://www.facebook.com/renatocarneirop

"Não acredite no que eu digo, pois é a minha experiência e não a sua. Experimente, indague e busque." - Osho Rajneesh

xiloba
(usa Slackware)

Enviado em 23/10/2015 - 13:08h

Eu dei um locate b43 e apareceu, varias vezes, o arquivo b43. Olha so

bash-4.1# locate b43
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43legacy
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43legacy/b43legacy.ko
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43
/lib/modules/2.6.37.6/kernel/drivers/net/wireless/b43/b43.ko
/lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/b43legacy
/lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/b43legacy/b43legacy.ko
/lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/b43
/lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/b43/b43.ko
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/main.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/sysfs.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/leds.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/radio.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/debugfs.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/dma.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/Kconfig
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/b43legacy.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/rfkill.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/ilt.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/ilt.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/pio.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/Makefile
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/dma.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/xmit.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/leds.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/pio.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/sysfs.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/xmit.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/phy.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/debugfs.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/radio.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/rfkill.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/phy.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43legacy/main.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/main.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/sysfs.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/leds.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_lp.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/debugfs.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/sdio.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/dma.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/tables_lpphy.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_a.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_n.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/wa.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_common.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/Kconfig
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_common.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/tables_lpphy.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_a.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/tables_nphy.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/pcmcia.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_g.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/rfkill.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/radio_2055.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/pio.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/Makefile
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/dma.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_n.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/sdio.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_g.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/lo.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/tables.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/xmit.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/leds.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/pcmcia.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/pio.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/phy_lp.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/sysfs.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/b43.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/radio_2056.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/radio_2055.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/xmit.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/tables_nphy.h
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/tables.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/radio_2056.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/wa.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/lo.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/debugfs.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/rfkill.c
/usr/src/linux-2.6.37.6/drivers/net/wireless/b43/main.h
/usr/src/linux-2.6.37.6/drivers/ssb/b43_pci_bridge.c
/usr/src/linux-2.6.37.6/include/config/ssb/b43
/usr/src/linux-2.6.37.6/include/config/ssb/b43/pci
/usr/src/linux-2.6.37.6/include/config/ssb/b43/pci/bridge.h
/usr/src/linux-2.6.37.6/include/config/b43legacy.h
/usr/src/linux-2.6.37.6/include/config/b43legacy
/usr/src/linux-2.6.37.6/include/config/b43legacy/pcicore
/usr/src/linux-2.6.37.6/include/config/b43legacy/pcicore/autoselect.h
/usr/src/linux-2.6.37.6/include/config/b43legacy/hwrng.h
/usr/src/linux-2.6.37.6/include/config/b43legacy/dma.h
/usr/src/linux-2.6.37.6/include/config/b43legacy/pci
/usr/src/linux-2.6.37.6/include/config/b43legacy/pci/autoselect.h
/usr/src/linux-2.6.37.6/include/config/b43legacy/pio.h
/usr/src/linux-2.6.37.6/include/config/b43legacy/dma
/usr/src/linux-2.6.37.6/include/config/b43legacy/dma/and
/usr/src/linux-2.6.37.6/include/config/b43legacy/dma/and/pio
/usr/src/linux-2.6.37.6/include/config/b43legacy/dma/and/pio/mode.h
/usr/src/linux-2.6.37.6/include/config/b43legacy/leds.h
/usr/src/linux-2.6.37.6/include/config/b43.h
/usr/src/linux-2.6.37.6/include/config/b43
/usr/src/linux-2.6.37.6/include/config/b43/pcicore
/usr/src/linux-2.6.37.6/include/config/b43/pcicore/autoselect.h
/usr/src/linux-2.6.37.6/include/config/b43/hwrng.h
/usr/src/linux-2.6.37.6/include/config/b43/pci
/usr/src/linux-2.6.37.6/include/config/b43/pci/autoselect.h
/usr/src/linux-2.6.37.6/include/config/b43/pio.h
/usr/src/linux-2.6.37.6/include/config/b43/sdio.h
/usr/src/linux-2.6.37.6/include/config/b43/leds.h
/usr/src/linux-2.6.37.6/include/config/b43/pcmcia.h
/usr/src/linux-2.6.37.6/include/config/b43/phy
/usr/src/linux-2.6.37.6/include/config/b43/phy/lp.h
bash-4.1#

xiloba
(usa Slackware)

Enviado em 23/10/2015 - 13:10h

Eu copiei assim

cp ucode15.fw /usr/src/linux-2.6.37.6/drivers/net/wireless/b43

nao era isso?