Problemas com Intel4965agn

Dalilo
(usa Arch Linux)

Enviado em 18/08/2011 - 15:35h

Hola a todos, eu sou novo aqui no site e também sou novo usando o Slakware, a versão que estou usando é a 13.37, o que acontece é que o Sistema reconhece minha placa de rede porém não a habilita, tentei desabilitar e hablitar a mesma com os comandos: ifconfig wlan0 down e ifconfig wlan0 up, porém quando digito comando if...up me da essa mensagem: SIOCSIFFLAGS: Operation not possible due to RF-kill.

Até ai ok, depois disso avirguei o status da minha placa com o comando rfkill list e me mostrou a seguinte menssagem:

bash-4.1# rfkill list
0: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: yes
1: hp-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: yes
2: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: yes

Depois disso tentei desbloquear a placa com os comandos rfkill unblock all, rfkill unblock 0,........2, ao aplicar esses comandos o terminal "trava" como que fica executando o comando porém nunca termina, ao reiniciar a maquina o problema persiste.

Porfavor se alguém puder me ajudar eu agradeceria muito...

Abraços..

dalsonn
(usa Debian)

Enviado em 15/03/2012 - 22:30h

Cara, eu estou hoje com esse exato problema. Parece que fui eu que escrevi esse post... Vc conseguiu resolver?

JJSantos
(usa Gentoo)

Enviado em 15/03/2012 - 22:45h

De uma olhada no seu arquivo blacklist.... pois é provável que a mesma esteja lá, estando comente a linha referente a ele reinicie e tente novamente.

dalsonn
(usa Debian)

Enviado em 17/03/2012 - 17:52h

Olá Josué,

Valew por responder cara. Seguinte eu verifiquei no blacklist.conf e achei a sessão referente ao adaptador wireless, mas como não entendi o que estava descrito ali, acabei não mexendo no arquivo. No entando, as seções do arquivo dizem que os módulos estão listados, e que se necessário, deve-se subir o módulo manualmente.

Me abriu caminho pois fui atras do modprobe.

Então segui uma sequencia:

Usei o #lspci, e veja que minha placa foi reconhecida:

07:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)

Então acessei o diretório que contém os drivers:

#cd /lib/modules/$(uname -r)/kernel/drivers

(Pra quem ainda não tinha visto, o #uname -r sozinho, retorna a versão do kernel. E dentro do diretório /lib/modules/ tem um diretório que usa esse retorno, como seu próprio nome)

Pesquisei no diretório para ver se algum arquivo dali casava com o nome da minha placa:

#grep -iR '4965' net

E esse comando me retornou:

Binary file net/wireless/iwlwifi/iwlagn.ko matches

Então, com esse nome em mãos, usei o #lsmod | grep iwl, para ver se já existia alguma coisa carregado ou se ia precisar carregar manualmente, e.....:

root@dalson-slacklinux:/lib/modules/2.6.37.6-smp/kernel/drivers$lsmod | grep iwl
iwlagn 166333 0
iwlcore 48433 1 iwlagn
mac80211 181473 2 iwlagn,iwlcore
cfg80211 122542 3 iwlagn,iwlcore,mac80211

Ou seja já estava carregado e suas dependencias

Tipo, eu não alterei nada... a não ser quando usava o comando #rfkill unblock 0 e o terminal ficava em looping...

Ainda assim usei o modprobe pra subir ele:

#modprobe iwlagn

Mas o retorno que eu queria, já tinha dado já, que foi onde eu vi que os módulos ja estavam carregados...

Mas teve uma diferença na sequencia, pois dei de novo um #rfkill list, e o retorno foi diferente (antes tinha sido identico ao do colega acima que abriu o tópico)

root@dalson-slacklinux:~$rfkill list
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
2: hp-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: yes
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

Agora a placa está online... mas não conecta com a minha chave WPA/WPA2, com o Wicd. Conecta com uma chave WEP, mas não quero usar essa chave (porque já há outras máquinas aqui conectadas usando a chave WPA/WPA2). Quando volto para a chave WPA/WPA2, desconecta.

Me fiz entender? Pode me ajudar?

Obrigado!!

JJSantos
(usa Gentoo)

Enviado em 17/03/2012 - 23:56h

Posso tentar te ajudar!

Rode um dmseg

# dmseg

dalsonn
(usa Debian)

Enviado em 18/03/2012 - 00:13h

Olá Josué,

Obrigado

#dmesg ?

Segue o retorno

root@dalson-slacklinux:~$dmesg
@ 20000 KHz), (300 mBi, 2000 mBm)
[32919.238247] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[32919.238254] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32919.238260] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32920.940859] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[32920.942636] wlan0: authenticated
[32920.942700] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[32920.946433] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=1)
[32920.946440] wlan0: associated
[32924.212208] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[32924.233334] cfg80211: Calling CRDA to update world regulatory domain
[32924.240195] cfg80211: World regulatory domain updated:
[32924.240202] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[32924.240209] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32924.240216] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[32924.240223] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[32924.240229] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32924.240236] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32925.941055] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[32925.942854] wlan0: authenticated
[32925.942931] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[32925.946819] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=1)
[32925.946828] wlan0: associated
[32929.212372] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[32929.235332] cfg80211: Calling CRDA to update world regulatory domain
[32929.242256] cfg80211: World regulatory domain updated:
[32929.242263] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[32929.242270] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32929.242277] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[32929.242284] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[32929.242290] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32929.242296] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[32930.061079] iwlagn 0000:07:00.0: TX Power requested while scanning!
[32930.061089] iwlagn 0000:07:00.0: Error sending TX power (-11)
[32930.063519] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[32930.063609] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[32930.361884] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[32930.371874] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[32930.371947] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[32930.426276] sky2 0000:05:00.0: eth0: disabling interface
[32930.435848] sky2 0000:05:00.0: eth0: enabling interface
[32930.436293] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33090.285898] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33092.323238] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33092.354344] sky2 0000:05:00.0: eth0: disabling interface
[33092.363748] sky2 0000:05:00.0: eth0: enabling interface
[33092.364192] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33092.674382] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33094.830452] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33094.832293] wlan0: authenticated
[33094.832371] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33094.836279] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33094.836289] wlan0: associated
[33094.888515] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[33098.186269] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33098.208337] cfg80211: Calling CRDA to update world regulatory domain
[33098.215224] cfg80211: World regulatory domain updated:
[33098.215231] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33098.215238] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33098.215246] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33098.215252] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33098.215258] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33098.215265] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33099.916172] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33099.918068] wlan0: authenticated
[33099.918146] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33099.922056] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33099.922066] wlan0: associated
[33103.187629] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33103.210349] cfg80211: Calling CRDA to update world regulatory domain
[33103.217212] cfg80211: World regulatory domain updated:
[33103.217219] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33103.217226] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33103.217233] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33103.217240] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33103.217246] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33103.217253] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33104.920800] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33104.922712] wlan0: authenticated
[33104.922790] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33104.926703] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33104.926713] wlan0: associated
[33105.762256] wlan0: no IPv6 routers present
[33108.192304] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33108.214332] cfg80211: Calling CRDA to update world regulatory domain
[33108.221223] cfg80211: World regulatory domain updated:
[33108.221231] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33108.221238] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33108.221245] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33108.221252] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33108.221258] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33108.221264] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33109.922162] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33109.924264] wlan0: authenticated
[33109.924375] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33109.928301] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33109.928310] wlan0: associated
[33113.193857] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33113.216332] cfg80211: Calling CRDA to update world regulatory domain
[33113.223205] cfg80211: World regulatory domain updated:
[33113.223212] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33113.223220] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33113.223227] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33113.223234] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33113.223240] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33113.223247] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33114.946462] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33114.948573] wlan0: authenticated
[33114.948683] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33114.952551] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33114.952561] wlan0: associated
[33118.198211] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33118.220348] cfg80211: Calling CRDA to update world regulatory domain
[33118.227236] cfg80211: World regulatory domain updated:
[33118.227243] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33118.227250] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33118.227257] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33118.227264] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33118.227270] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33118.227276] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33119.928198] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33119.930002] wlan0: authenticated
[33119.930195] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33119.933948] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33119.933954] wlan0: associated
[33123.199750] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33123.222330] cfg80211: Calling CRDA to update world regulatory domain
[33123.229165] cfg80211: World regulatory domain updated:
[33123.229172] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33123.229180] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33123.229186] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33123.229193] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33123.229199] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33123.229206] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33124.930126] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33124.932015] wlan0: authenticated
[33124.932092] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33124.936071] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33124.936081] wlan0: associated
[33128.201640] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33128.223326] cfg80211: Calling CRDA to update world regulatory domain
[33128.230179] cfg80211: World regulatory domain updated:
[33128.230186] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33128.230194] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33128.230201] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33128.230207] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33128.230213] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33128.230220] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33129.931142] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33129.933181] wlan0: authenticated
[33129.933291] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33129.937229] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33129.937239] wlan0: associated
[33133.202800] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33133.225324] cfg80211: Calling CRDA to update world regulatory domain
[33133.232268] cfg80211: World regulatory domain updated:
[33133.232276] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33133.232283] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33133.232290] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33133.232296] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33133.232303] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33133.232309] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33134.061191] iwlagn 0000:07:00.0: TX Power requested while scanning!
[33134.061201] iwlagn 0000:07:00.0: Error sending TX power (-11)
[33134.063608] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33134.063708] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[33134.369512] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33134.382888] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[33134.382953] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[33134.446276] sky2 0000:05:00.0: eth0: disabling interface
[33134.455849] sky2 0000:05:00.0: eth0: enabling interface
[33134.456296] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33294.285246] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33296.331366] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33296.363260] sky2 0000:05:00.0: eth0: disabling interface
[33296.372834] sky2 0000:05:00.0: eth0: enabling interface
[33296.373280] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33296.686796] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33298.838443] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33298.840366] wlan0: authenticated
[33298.840445] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33298.844350] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33298.844359] wlan0: associated
[33298.898463] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[33302.156526] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33302.179335] cfg80211: Calling CRDA to update world regulatory domain
[33302.186186] cfg80211: World regulatory domain updated:
[33302.186192] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33302.186200] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33302.186207] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33302.186213] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33302.186220] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33302.186226] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33303.888408] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33303.890277] wlan0: authenticated
[33303.890354] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33303.894312] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33303.894322] wlan0: associated
[33307.159835] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33307.182335] cfg80211: Calling CRDA to update world regulatory domain
[33307.189182] cfg80211: World regulatory domain updated:
[33307.189189] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33307.189197] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33307.189204] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33307.189210] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33307.189216] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33307.189223] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33308.892334] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33308.894247] wlan0: authenticated
[33308.894324] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33308.898258] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33308.898268] wlan0: associated
[33309.026241] wlan0: no IPv6 routers present
[33312.163883] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33312.185324] cfg80211: Calling CRDA to update world regulatory domain
[33312.192195] cfg80211: World regulatory domain updated:
[33312.192202] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33312.192209] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33312.192216] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33312.192223] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33312.192229] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33312.192236] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33313.915462] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33313.917329] wlan0: authenticated
[33313.917403] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33313.921329] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33313.921339] wlan0: associated
[33317.166911] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33317.189331] cfg80211: Calling CRDA to update world regulatory domain
[33317.196191] cfg80211: World regulatory domain updated:
[33317.196198] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33317.196206] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33317.196213] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33317.196219] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33317.196226] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33317.196232] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33318.897118] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33318.899021] wlan0: authenticated
[33318.899087] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33318.905684] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33318.905693] wlan0: associated
[33322.168707] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33322.192335] cfg80211: Calling CRDA to update world regulatory domain
[33322.199217] cfg80211: World regulatory domain updated:
[33322.199224] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33322.199231] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33322.199238] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33322.199245] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33322.199251] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33322.199257] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33323.905543] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33323.907436] wlan0: authenticated
[33323.907515] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33323.911332] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33323.911341] wlan0: associated
[33327.167384] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33327.189331] cfg80211: Calling CRDA to update world regulatory domain
[33327.196185] cfg80211: World regulatory domain updated:
[33327.196193] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33327.196200] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33327.196207] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33327.196213] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33327.196220] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33327.196226] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33328.897141] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33328.898941] wlan0: authenticated
[33328.899027] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33328.902864] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33328.902872] wlan0: associated
[33332.168542] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33332.191327] cfg80211: Calling CRDA to update world regulatory domain
[33332.198194] cfg80211: World regulatory domain updated:
[33332.198201] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33332.198208] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33332.198215] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33332.198222] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33332.198228] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33332.198234] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33333.901101] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33333.902946] wlan0: authenticated
[33333.903031] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33333.906932] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33333.906942] wlan0: associated
[33337.172473] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33337.195333] cfg80211: Calling CRDA to update world regulatory domain
[33337.202207] cfg80211: World regulatory domain updated:
[33337.202214] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33337.202222] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33337.202228] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33337.202235] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33337.202242] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33337.202248] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33338.060544] iwlagn 0000:07:00.0: TX Power requested while scanning!
[33338.060555] iwlagn 0000:07:00.0: Error sending TX power (-11)
[33338.063044] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33338.063108] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[33338.361633] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33338.370928] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[33338.370992] wlan0: deauthenticating from 1c:af:f7:58:ca:5a by local choice (reason=3)
[33338.425108] sky2 0000:05:00.0: eth0: disabling interface
[33338.434601] sky2 0000:05:00.0: eth0: enabling interface
[33338.435045] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33480.562973] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
[33498.276728] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33500.309480] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33500.342267] sky2 0000:05:00.0: eth0: disabling interface
[33500.351854] sky2 0000:05:00.0: eth0: enabling interface
[33500.352311] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33500.658394] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33502.810227] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33502.812069] wlan0: authenticated
[33502.812135] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33502.818892] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33502.818901] wlan0: associated
[33502.874680] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[33506.126360] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33506.149337] cfg80211: Calling CRDA to update world regulatory domain
[33506.156219] cfg80211: World regulatory domain updated:
[33506.156226] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33506.156234] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33506.156241] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33506.156247] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33506.156254] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33506.156260] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33507.879880] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33507.881713] wlan0: authenticated
[33507.881790] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33507.885741] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33507.885751] wlan0: associated
[33511.131263] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33511.152335] cfg80211: Calling CRDA to update world regulatory domain
[33511.159210] cfg80211: World regulatory domain updated:
[33511.159217] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33511.159225] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33511.159231] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33511.159238] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33511.159245] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33511.159251] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33512.882867] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33512.884841] wlan0: authenticated
[33512.884917] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33512.888834] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33512.888844] wlan0: associated
[33513.154248] wlan0: no IPv6 routers present
[33513.162311] usb 5-1: new low speed USB device using uhci_hcd and address 3
[33513.325560] usb 5-1: New USB device found, idVendor=15d9, idProduct=0a4c
[33513.325570] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[33513.325576] usb 5-1: Product: USB OPTICAL MOUSE
[33513.343643] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input14
[33513.343958] generic-usb 0003:15D9:0A4C.0002: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[33516.145296] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33516.167325] cfg80211: Calling CRDA to update world regulatory domain
[33516.174307] cfg80211: World regulatory domain updated:
[33516.174314] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33516.174322] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33516.174329] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33516.174335] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33516.174341] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33516.174348] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33517.897854] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33517.899703] wlan0: authenticated
[33517.899780] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33517.903677] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=1)
[33517.903687] wlan0: associated
[33521.133060] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33521.156335] cfg80211: Calling CRDA to update world regulatory domain
[33521.163312] cfg80211: World regulatory domain updated:
[33521.163319] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33521.163326] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33521.163333] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33521.163340] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33521.163346] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33521.163353] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33522.864765] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33522.866691] wlan0: authenticated
[33522.866767] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33522.870663] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33522.870673] wlan0: associated
[33526.136242] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33526.158336] cfg80211: Calling CRDA to update world regulatory domain
[33526.165263] cfg80211: World regulatory domain updated:
[33526.165269] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33526.165277] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33526.165284] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33526.165290] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33526.165297] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33526.165303] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33527.864835] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33527.866698] wlan0: authenticated
[33527.866778] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33527.870627] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33527.870637] wlan0: associated
[33531.136327] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33531.158333] cfg80211: Calling CRDA to update world regulatory domain
[33531.165287] cfg80211: World regulatory domain updated:
[33531.165294] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33531.165302] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33531.165308] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33531.165315] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33531.165322] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33531.165328] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33532.867181] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33532.869051] wlan0: authenticated
[33532.869131] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33532.873058] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33532.873068] wlan0: associated
[33536.138614] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33536.161346] cfg80211: Calling CRDA to update world regulatory domain
[33536.168177] cfg80211: World regulatory domain updated:
[33536.168184] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33536.168192] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33536.168199] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33536.168205] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33536.168212] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33536.168218] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33537.869101] wlan0: authenticate with 1c:af:f7:58:ca:5a (try 1)
[33537.871155] wlan0: authenticated
[33537.871266] wlan0: associate with 1c:af:f7:58:ca:5a (try 1)
[33537.875206] wlan0: RX AssocResp from 1c:af:f7:58:ca:5a (capab=0x431 status=0 aid=2)
[33537.875216] wlan0: associated
[33541.140744] wlan0: deauthenticated from 1c:af:f7:58:ca:5a (Reason: 3)
[33541.163321] cfg80211: Calling CRDA to update world regulatory domain
[33541.170258] cfg80211: World regulatory domain updated:
[33541.170265] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33541.170272] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33541.170279] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33541.170286] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33541.170292] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33541.170299] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33542.035315] iwlagn 0000:07:00.0: TX Power requested while scanning!
[33542.035322] iwlagn 0000:07:00.0: Error sending TX power (-11)
[33542.044370] iwlagn 0000:07:00.0: TX Power requested while scanning!
[33542.044377] iwlagn 0000:07:00.0: Error sending TX power (-11)
[33542.329506] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33542.409269] sky2 0000:05:00.0: eth0: disabling interface
[33542.419035] sky2 0000:05:00.0: eth0: enabling interface
[33542.419458] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33562.637141] sky2 0000:05:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[33562.637233] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[33573.050037] eth0: no IPv6 routers present
[33580.391490] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33581.206131] iwlagn 0000:07:00.0: TX Power requested while scanning!
[33581.206136] iwlagn 0000:07:00.0: Error sending TX power (-11)
[33581.214982] iwlagn 0000:07:00.0: TX Power requested while scanning!
[33581.214987] iwlagn 0000:07:00.0: Error sending TX power (-11)
[33581.498238] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33581.595047] sky2 0000:05:00.0: eth0: disabling interface
[33581.600565] sky2 0000:05:00.0: eth0: enabling interface
[33581.600864] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33581.614054] sky2 0000:05:00.0: eth0: disabling interface
[33581.623230] sky2 0000:05:00.0: eth0: enabling interface
[33581.623403] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33583.310864] sky2 0000:05:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[33583.311339] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[33593.546174] eth0: no IPv6 routers present

JJSantos
(usa Gentoo)

Enviado em 18/03/2012 - 00:26h

Você tem o pacote wpa_supplicant instalado?
Se não instale.

Posta o resultado do comando:

# cat /proc/net/dev
# cat /proc/net/wireless
# ifconfig
# ifconfig wlan0 up
# iwlist wlan0 scan

Qual seu WM, e MN?

dalsonn
(usa Debian)

Enviado em 18/03/2012 - 00:50h

Olá Josué,

root@dalson-slacklinux:~$cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 36976 492 0 0 0 0 0 0 36976 492 0 0 0 0 0 0
eth0: 25353535 24570 0 0 0 0 0 0 2588065 21390 0 0 0 0 0 0
wlan0: 574601 1317 0 0 0 0 0 0 222474 1513 0 0 0 0 0 0

root@dalson-slacklinux:~$cat /proc/net/wireless
Inter-| sta-| Quality | Discarded packets | Missed | WE
face | tus | link level noise | nwid crypt frag retry misc | beacon | 22

(esse parece que não retornou nada)

root@dalson-slacklinux:~$ifconfig
eth0 Link encap:Ethernet HWaddr 00:22:64:C4:01:DE
inet addr:192.168.0.186 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:64ff:fec4:1de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:24688 errors:0 dropped:0 overruns:0 frame:0
TX packets:21512 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25427480 (24.2 Mb) TX bytes:2607188 (2.4 Mb)
Interrupt:17

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:492 errors:0 dropped:0 overruns:0 frame:0
TX packets:492 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:36976 (36.1 Kb) TX bytes:36976 (36.1 Kb)

wlan0 Link encap:Ethernet HWaddr 00:1F:3B:96:E1:1F
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:1317 errors:0 dropped:0 overruns:0 frame:0
TX packets:1513 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:574601 (561.1 Kb) TX bytes:222474 (217.2 Kb)

root@dalson-slacklinux:~$ifconfig wlan0 up

root@dalson-slacklinux:~$iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 1C:AF:F7:58:CA:5A
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=70/70 Signal level=-38 dBm
Encryption key:on
ESSID:"wlanlinares"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000006f5646318
Extra: Last beacon: 1571ms ago
IE: Unknown: 000B776C616E6C696E61726573
IE: Unknown: 010882848B961224486C
IE: Unknown: 030106
IE: Unknown: 2A0100
IE: Unknown: 32040C183060
IE: Unknown: 2D1AEE1117FF000000010000000000000000000000000C0000000000
IE: Unknown: 3D1606070700000000000000000000000000000000000000
IE: Unknown: 3E0100
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
IE: Unknown: 7F0101
IE: Unknown: DD07000C4307000000
IE: Unknown: DD1E00904C33EE1117FF000000010000000000000000000000000C0000000000
IE: Unknown: DD1A00904C3406070700000000000000000000000000000000000000

E tb, tenho o wpa_supplicant instalado:

root@dalson-slacklinux:~$whereis wpa_supplicant
wpa_supplicant: /usr/sbin/wpa_supplicant /etc/wpa_supplicant.conf /usr/man/man8/wpa_supplicant.8.gz /usr/share/man/man8/wpa_supplicant.8.gz /usr/X11/man/man8/wpa_supplicant.8.gz

Está correto?

dalsonn
(usa Debian)

Enviado em 18/03/2012 - 00:54h

Desculpe Josué, pode me clarear o que é WM e MN ?

JJSantos
(usa Gentoo)

Enviado em 18/03/2012 - 00:57h

Windows Maneger:kde, gnome, xfce, openbox e etc.... e Network Maneger:wicd, knetwork maneger, wvdial e etc.

Posta ai:

# lshw -C network

JJSantos
(usa Gentoo)

Enviado em 18/03/2012 - 01:07h

Sua saídas estão normais.

De acordo com que foi passado você tem uma rede disponível:

Quality=70/70 Signal level=-38 dBm
Encryption key:on
ESSID:"wlanlinares"

Você tem o network maneger?

dalsonn
(usa Debian)

Enviado em 19/03/2012 - 23:01h

Olá Josué,

Cara...li, fiz, e caí no mesmo problema...

Primeiro, deixe-me responder suas perguntas, uso o XFCE, e o NM é o WICD. Verifiquei que o wpa_supllicant está instaldo já, através do comando:

#whereis wpa_supplicant

Vc disse que as sáidas estavam normais e fui pesquisar porque não está acessando a rede, embora encontre a rede agora.

Achei configuração para inserir no /etc/wpa_supplicant.conf através do comando:

#wpa_supplicant <minharede>, seguido de <minhasenha>

Inseri a configuração lá, e em seguida usei um comando, para "ativar" a configuração inserida:

#wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -d -D wext

E aí, me retorna o seguinte:

Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Priority group 0
id=0 ssid='wlanlinares'
WEXT: cfg80211-based driver detected
Could not set interface wlan0 flags: Operation not possible due to RF-kill
Failed to initialize driver interface
Failed to add interface wlan0
Cancelling scan request
Cancelling authentication timeout

Ele aceitou o driver wext e tal né...mas disse que a operação não foi possivel por causa do rfkill de novo...

Então dei um rfkill list, e me retornou:

0: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: yes
1: hp-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: yes
2: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: yes

Novamente tudo bloqueado, e quando dou o comando #rfkill unblock 0, ou 1, ou 2, ou all, ele entra num looping que não finaliza nunca, ou fica esperando algum comando como argumento que eu não entendi...