Samba 4 no Debian 8 [RESOLVIDO]

Mutano_1
(usa Debian)

Enviado em 07/08/2017 - 09:10h

Bom dia galeraaaaaa, bom me falaram que tem como fazer só pelo smb.conf da forma que eu quero:
Quero que quando o usuário windows entrar em meus locais de rede, ele veja servidor.
clique sem pedir senha, pois a maquina dele já vai estar cadastrada por mac de rede, mas quando o usuário clica na pasta que ele quer entrar, só entra se tiver a senha, pedindo a senha.
Isso é possível mesmo, só pelo smb.conf. Abaixo o meu.
[global]
workgroup = #############
netbios name = #########
interfaces = lo eth0 eth1
security = USER
username level = 3
max log size = 50
keepalive = 20
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
domain master = No
dns proxy = No
wins support = Yes
dns forwarder = #######
idmap_ldb:use rfc2307 = yes
idmap config * : backend = tdb
admin users = infra
read only = No
max connections = 100

[home]
comment = diretorio home
path = /home
available = No

[dados]
comment = area publica
path = /home/dados
write list = infra lucas max @cpd
guest ok = Yes
hosts allow = #######
veto files = /*.mp3/*.com/*.scr/*.pif/*.bat/*.wma/*.avi/*.mpg/*.flv /*.{*}

[infra]
comment = infra
path = /home/infra
write list = @cpd
invalid users = lucas
available = Yes

[lucas]
comment = lucas
path = /home/lucas
write list = @cpd lucas
available = Yes

[max]
comment = max
path = /home/max
write list = @cpd lucas max
available = Yes

JJSantos
(usa Gentoo)

Enviado em 07/08/2017 - 12:51h

Veja esse smb.conf está comentado, caso tenha duvidas posta ai.

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba, 
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the 
# Samba-Guide which is generated daily and can be downloaded from: 
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = workgroup

# server string is the equivalent of the NT Description field
server string = srv0702

# Name visible in Network
netbios name = srv0702

# Security mode. Defines in which mode Samba will operate. Possible 
# values are share, user, server, domain and ads. Most people will want 
# user level security. See the Samba-HOWTO-Collection for details.
security = user

# Encrypts passwords
encrypt passwords = true

# User with root power
admin users = adminsamba

# Prevents the recording files
veto files = /*.pif/*.bat/*.exe/*.msi/*.tif/*.jpg/*.jpeg/*.png/*.bmp/*.gif/*.pptx/*.mp3/*.wma/*.wmv/*.mp4/*.flv/*.aac/*.sfx/*.xlt/*.odg/*.xlsx/*.mkv/*.pif/*.avi/

# Preserve the name of the file sent by the station
preserve case = yes
default case = lower

# Password with at least 6 characters
# password level = 6

# Allows you to restrict by interface
bind interfaces only = yes

# Checks the connection every 20 seconds
keepalive = 20

# Where the error log will be written
panic action = echo `date` > /var/log/samba/panic.log

# Improves network performance
# log level = 1
# socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# read raw = yes
# write raw = yes
# kernel oplocks = yes
# max xmit = 65535
# deadtime = 15
# getwd cache = yes

# Coding Standard
unix charset = iso8859-1
display charset = cp850

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts deny = ALL
;   hosts allow = 10.0.7.1/24

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
;   printing = cups

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/full_audit.log

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
;   password server = <NT-Server-Name>

# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
;   realm = MY_REALM

# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration. If you're 
# migrating from < samba 3.4, you'll have to convert your old user 
# passwords to the new backend with the command:
# pdbedit -i smbpasswd:/var/lib/samba/private/smbpasswd -e
;   passdb backend = tdbsam

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
#       this line.  The included file is read at that point.
;   include = /etc/samba/smb.conf.%m

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = eth0, lo, enp2s0,

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = yes

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = no 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = no

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes
;	max wins ttl = 518400
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = 10.0.7.3
;   wins server = 10.0.7.4
;   wins server = 10.0.7.5
;   wins server = 10.0.7.6
;   wins server = 10.0.7.7
;   wins server = 10.0.7.8
;   wins server = 10.0.7.9
;   wins server = 10.0.7.10
;   wins server = 10.0.7.11
;   wins server = 10.0.7.12
;   wins server = 10.0.7.13
;   wins server = 10.0.7.14
;   wins server = 10.0.7.15
;   wins server = 10.0.7.16
;   wins server = 10.0.7.17	

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
;   wins proxy = no

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
   dns proxy = no 

# These scripts are used on a domain controller or stand-alone 
# machine to add or delete corresponding unix accounts
;  add user script = /usr/sbin/useradd %u
;  add group script = /usr/sbin/groupadd %g
;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
;  delete user script = /usr/sbin/userdel %u
;  delete user from group script = /usr/sbin/deluser %u %g
;  delete group script = /usr/sbin/groupdel %g

# Audity
vfs objects = full_audit
full_audit:sucess = open, opendir, write, unlink, rename, mkdir, rmdir
full_audit:prefix = %u|%I|%S
full_audit:failure = none
full_audit:facility = local5
full_audit:priority = notice

#============================ Share Definitions ==============================
#[homes]
   comment = Home Directories
   browseable = no
   writable = no

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /var/lib/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /var/lib/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
#[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = no

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /mnt/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765
[Scan]
    path = /mnt/scan/  
    guest ok = no
    browseable = no
    available = yes
    read only = no
    writeable = yes
    valid users = sc
    create mask = 0756
    force create mode = 0756
[Dpscan]
    path = /media/dpscan/
    guest ok = no
    browseable = no
    available = yes
    read only = no
    writeable = yes
    valid users = dpsc
    create mask = 0756
    force create mode = 0756
[Atestados]
    path = /mnt/atestados/
    guest ok = no
    browseable = no
    available = yes
    read only = no
    writeable = yes
    valid users = rh07;sc
    create mask = 0756
    force create mode = 0756