Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

1. Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

Mário Douglas
mariodac

(usa Ubuntu)

Enviado em 27/08/2016 - 17:18h

Olá tenho um notebook Asus X45U e resolvi instalar o ubuntu 14.04
Mas meu wifi não funciona sendo q o led aparece que tá ligado
Já tentei vários tutoriais até de uns forums daqui do site mas nenhum resolveu
Por favor me ajudem a resolver esse problema


  


2. Re: Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

Perfil removido
removido

(usa Nenhuma)

Enviado em 27/08/2016 - 17:40h

-poste saída comando: lspci



3. Re: Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

Mário Douglas
mariodac

(usa Ubuntu)

Enviado em 27/08/2016 - 17:50h

clodoaldops escreveu:

-poste saída comando: lspci


mario@mario-X45U:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6290]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
01:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
02:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)



4. Re: Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

Perfil removido
removido

(usa Nenhuma)

Enviado em 27/08/2016 - 18:41h

Eu tenho uma Ralink RT5372 que foi reconhecida automaticamente pelo Ubuntu-16.04.1-lts
Sugiro que grave um dvd/pendrive e teste sem instalar


5. depois de muito tempo

Mário Douglas
mariodac

(usa Ubuntu)

Enviado em 07/03/2017 - 18:13h

nessa epóca procurei em varios lugares uma solução pra esse problema e acabei desistindo de usar linux
mas devido ao meu estudo q estou fazendo fica inevitavel o uso do linux
alguem por favor teria uma solução pra isso



6. Re: Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

Guilherme
Ghost_Shell

(usa Arch Linux)

Enviado em 07/03/2017 - 19:46h

mariodac escreveu:

nessa epóca procurei em varios lugares uma solução pra esse problema e acabei desistindo de usar linux
mas devido ao meu estudo q estou fazendo fica inevitavel o uso do linux
alguem por favor teria uma solução pra isso


Fala brother, abre o terminal e cola a saída desses comandos please.

sudo lshw -C network

dmesg

Keep it simple stupid!


7. Re: Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

8. Re: Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

Perfil removido
removido

(usa Nenhuma)

Enviado em 07/03/2017 - 23:30h



Ralink RT5390 não esta no pacote firmware-ralink atualmente.



http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git


9. Ta ai saida do comando sudo lshw -C network

Mário Douglas
mariodac

(usa Ubuntu)

Enviado em 07/03/2017 - 23:42h

*-network DISABLED
description: Wireless interface
product: RT5390 Wireless 802.11n 1T/1R PCIe
vendor: Ralink corp.
physical id: 0
bus info: pci@0000:01:00.0
logical name: wlan0
version: 00
serial: e0:06:e6:70:ac:d6
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rt2800pci driverversion=3.13.0-24-generic firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
resources: irq:16 memory:fea00000-fea0ffff
*-network
description: Ethernet interface
product: AR8161 Gigabit Ethernet
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 10
serial: 10:bf:48:97:a8:bc
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=alx duplex=full ip=192.168.0.3 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:48 memory:fe900000-fe93ffff ioport:e000(size=128)



10. Ta ai saida do comando dmesg

Mário Douglas
mariodac

(usa Ubuntu)

Enviado em 07/03/2017 - 23:47h

Ghost_Shell escreveu:

mariodac escreveu:

nessa epóca procurei em varios lugares uma solução pra esse problema e acabei desistindo de usar linux
mas devido ao meu estudo q estou fazendo fica inevitavel o uso do linux
alguem por favor teria uma solução pra isso


Fala brother, abre o terminal e cola a saída desses comandos please.
[ 0.451262] TCP: reno registered
[ 0.451299] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.451379] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.451660] NET: Registered protocol family 1
[ 0.451709] pci 0000:00:01.0: Boot video device
[ 0.545994] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.546010] PCI: CLS 64 bytes, default 64
[ 0.546155] Trying to unpack rootfs image as initramfs...
[ 1.535576] Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
[ 1.535594] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.535603] software IO TLB [mem 0xb2590000-0xb6590000] (64MB) mapped at [ffff8800b2590000-ffff8800b658ffff]
[ 1.536042] LVT offset 0 assigned for vector 0x400
[ 1.536170] perf: AMD IBS detected (0x000000ff)
[ 1.536407] microcode: CPU0: patch_level=0x0500010d
[ 1.536427] microcode: CPU1: patch_level=0x0500010d
[ 1.536773] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.536786] Scanning for low memory corruption every 60 seconds
[ 1.537720] Initialise system trusted keyring
[ 1.537888] audit: initializing netlink socket (disabled)
[ 1.537919] type=2000 audit(1488925889.416:1): initialized
[ 1.617494] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.622564] VFS: Disk quotas dquot_6.5.2
[ 1.622736] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.624621] fuse init (API version 7.22)
[ 1.625133] msgmni has been set to 7068
[ 1.625452] Key type big_key registered
[ 1.627006] Key type asymmetric registered
[ 1.627021] Asymmetric key parser 'x509' registered
[ 1.627175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.627308] io scheduler noop registered
[ 1.627314] io scheduler deadline registered (default)
[ 1.627397] io scheduler cfq registered
[ 1.627969] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 1.628339] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.628525] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 1.628533] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.628542] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 1.628583] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 1.628590] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.628599] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 1.628638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.628689] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.628807] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[ 1.628811] vesafb: scrolling: redraw
[ 1.628818] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.629579] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 4224k, total 4224k
[ 1.740091] Console: switching to colour frame buffer device 170x48
[ 1.848426] fb0: VESA VGA frame buffer device
[ 1.848640] ipmi message handler version 39.2
[ 1.849033] ACPI: AC Adapter [AC0] (off-line)
[ 1.849325] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.849336] ACPI: Power Button [PWRB]
[ 1.849426] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.873804] ACPI: Lid Switch [LID]
[ 1.873964] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.873976] ACPI: Sleep Button [SLPB]
[ 1.874056] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.874062] ACPI: Power Button [PWRF]
[ 1.874382] ACPI: acpi_idle registered with cpuidle
[ 1.876479] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.876490] ACPI: Thermal Zone [THRM] (52 C)
[ 1.876568] GHES: HEST is not enabled!
[ 1.876828] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.885886] Linux agpgart interface v0.103
[ 1.893013] brd: module loaded
[ 1.895924] loop: module loaded
[ 1.897138] libphy: Fixed MDIO Bus: probed
[ 1.897518] tun: Universal TUN/TAP device driver, 1.6
[ 1.897523] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.897737] PPP generic driver version 2.4.2
[ 1.897898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.897919] ehci-pci: EHCI PCI platform driver
[ 1.898297] QUIRK: Enable AMD PLL fix
[ 1.898372] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.898391] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.898406] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.898441] ehci-pci 0000:00:12.2: debug port 1
[ 1.898555] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4b000
[ 1.906310] ACPI: Battery Slot [BAT0] (battery present)
[ 1.909556] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.909751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.909757] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.909763] usb usb1: Product: EHCI Host Controller
[ 1.909767] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 1.909772] usb usb1: SerialNumber: 0000:00:12.2
[ 1.910366] hub 1-0:1.0: USB hub found
[ 1.910395] hub 1-0:1.0: 5 ports detected
[ 1.912306] ehci-platform: EHCI generic platform driver
[ 1.912339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.912344] ohci-pci: OHCI PCI platform driver
[ 1.912659] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.912678] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 1.912771] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4c000
[ 1.969700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.969714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.969721] usb usb2: Product: OHCI PCI host controller
[ 1.969728] usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[ 1.969734] usb usb2: SerialNumber: 0000:00:12.0
[ 1.970379] hub 2-0:1.0: USB hub found
[ 1.970463] hub 2-0:1.0: 5 ports detected
[ 1.972873] ohci-platform: OHCI generic platform driver
[ 1.972906] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.973341] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.973360] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.973672] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.973695] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.973717] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.973969] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.973977] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.973983] usb usb3: Product: xHCI Host Controller
[ 1.973989] usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[ 1.973995] usb usb3: SerialNumber: 0000:00:10.0
[ 1.974641] hub 3-0:1.0: USB hub found
[ 1.974697] hub 3-0:1.0: 2 ports detected
[ 1.975049] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.975064] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.977101] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.977108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.977114] usb usb4: Product: xHCI Host Controller
[ 1.977120] usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[ 1.977125] usb usb4: SerialNumber: 0000:00:10.0
[ 1.977811] hub 4-0:1.0: USB hub found
[ 1.977896] hub 4-0:1.0: 2 ports detected
[ 1.985948] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.987940] i8042: Detected active multiplexing controller, rev 1.1
[ 1.989365] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.989389] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.989467] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.989535] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.989594] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.990444] mousedev: PS/2 mouse device common for all mice
[ 1.991993] rtc_cmos 00:03: RTC can wake from S4
[ 1.992290] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.992360] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.992568] device-mapper: uevent: version 1.0.3
[ 1.992774] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.992793] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.993090] TCP: cubic registered
[ 1.993547] NET: Registered protocol family 10
[ 1.994081] NET: Registered protocol family 17
[ 1.994120] Key type dns_resolver registered
[ 1.994946] Loading compiled-in X.509 certificates
[ 1.998703] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[ 1.998741] registered taskstats version 1
[ 2.008034] Key type trusted registered
[ 2.016027] Key type encrypted registered
[ 2.024086] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.024100] IMA: No TPM chip found, activating TPM-bypass!
[ 2.024664] regulator-dummy: disabling
[ 2.024797] Magic number: 9:319:552
[ 2.024848] tty ttyS28: hash matches
[ 2.024919] acpi PNP0C0F:03: hash matches
[ 2.025060] rtc_cmos 00:03: setting system clock to 2017-03-07 22:31:30 UTC (1488925890)
[ 2.025382] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.025646] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.025651] EDD information not available.
[ 2.025775] PM: Hibernation image not present or could not be loaded.
[ 2.030348] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[ 2.030362] Write protecting the kernel read-only data: 12288k
[ 2.039148] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[ 2.039424] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.045836] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[ 2.100748] systemd-udevd[98]: starting version 204
[ 2.221452] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 2.249180] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [10:bf:48:97:a8:bc]
[ 2.253896] sdhci: Secure Digital Host Controller Interface driver
[ 2.253907] sdhci: Copyright(c) Pierre Ossman
[ 2.259293] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
[ 2.259730] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[ 2.259737] mmc0: no vqmmc regulator found
[ 2.259744] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[ 2.259749] mmc0: no vmmc regulator found
[ 2.263411] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 2.263501] ahci 0000:00:11.0: version 3.0
[ 2.263937] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
[ 2.264072] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.264083] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.265674] scsi0 : ahci
[ 2.266043] scsi1 : ahci
[ 2.266188] ata1: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d100 irq 45
[ 2.266197] ata2: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d180 irq 45
[ 2.461344] usb 1-2: New USB device found, idVendor=1bcf, idProduct=2883
[ 2.461384] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.461389] usb 1-2: Product: ASUS USB2.0 Webcam
[ 2.461394] usb 1-2: Manufacturer: 04G626000611BQ26A000E27
[ 2.533622] tsc: Refined TSC clocksource calibration: 998.184 MHz
[ 2.757688] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.757744] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.759651] ata2.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[ 2.761979] ata2.00: configured for UDMA/100
[ 2.784001] ata1.00: HPA detected: current 625140335, native 625142448
[ 2.784661] ata1.00: ATA-8: TOSHIBA MQ01ABF032, AM001A, max UDMA/100
[ 2.784672] ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.787145] ata1.00: configured for UDMA/100
[ 2.787835] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 AM00 PQ: 0 ANSI: 5
[ 2.788419] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 2.788426] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.788595] sd 0:0:0:0: [sda] Write Protect is off
[ 2.788608] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.788612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.788778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.790642] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B0 1.00 PQ: 0 ANSI: 5
[ 2.792847] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.792856] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.793164] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.793337] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.906372] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2.908354] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.534185] Switched to clocksource tsc
[ 3.711575] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.356511] random: init urandom read with 115 bits of entropy available
[ 4.559829] random: nonblocking pool is initialized
[ 13.348166] Adding 999996k swap on /dev/sda5. Priority:-1 extents:1 across:999996k FS
[ 13.368248] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 13.579935] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.902366] systemd-udevd[294]: starting version 204
[ 14.162529] lp: driver loaded but no devices found
[ 14.215084] ppdev: user-space parallel port driver
[ 14.544610] [drm] Initialized drm 1.1.0 20060810
[ 14.559743] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.559919] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 14.890419] acpi device:48: registered as cooling_device2
[ 14.895291] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 15.056086] wmi: Mapper loaded
[ 15.186810] Bluetooth: Core ver 2.17
[ 15.186947] NET: Registered protocol family 31
[ 15.186953] Bluetooth: HCI device and connection manager initialized
[ 15.186976] Bluetooth: HCI socket layer initialized
[ 15.186985] Bluetooth: L2CAP socket layer initialized
[ 15.187001] Bluetooth: SCO socket layer initialized
[ 15.204243] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.204256] Bluetooth: BNEP filters: protocol multicast
[ 15.204279] Bluetooth: BNEP socket layer initialized
[ 15.275188] Bluetooth: RFCOMM TTY layer initialized
[ 15.275223] Bluetooth: RFCOMM socket layer initialized
[ 15.275245] Bluetooth: RFCOMM ver 1.11
[ 15.370411] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SBSM 1 (20131115/utaddress-251)
[ 15.370439] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.376778] [drm] radeon kernel modesetting enabled.
[ 15.376907] checking generic (d0000000 420000) vs hw (d0000000 10000000)
[ 15.376913] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 15.377037] Console: switching to colour dummy device 80x25
[ 15.454701] [drm] initializing kernel modesetting (PALM 0x1002:0x9807 0x1043:0x14E7).
[ 15.454786] [drm] register mmio base: 0xFEB00000
[ 15.454790] [drm] register mmio size: 262144
[ 15.454947] ATOM BIOS: AMD
[ 15.455044] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 15.455054] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 15.455060] [drm] Detected VRAM RAM=384M, BAR=256M
[ 15.455065] [drm] RAM width 32bits DDR
[ 15.464897] [TTM] Zone kernel: Available graphics memory: 1811026 kiB
[ 15.464910] [TTM] Initializing pool allocator
[ 15.464924] [TTM] Initializing DMA pool allocator
[ 15.464993] [drm] radeon: 384M of VRAM memory ready
[ 15.464999] [drm] radeon: 1024M of GTT memory ready.
[ 15.465060] [drm] Loading PALM Microcode
[ 15.547370] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 15.587734] type=1400 audit(1488936704.059:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=464 comm="apparmor_parser"
[ 15.587761] type=1400 audit(1488936704.059:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=464 comm="apparmor_parser"
[ 15.596004] type=1400 audit(1488936704.067:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=464 comm="apparmor_parser"
[ 15.663070] type=1400 audit(1488936704.131:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=470 comm="apparmor_parser"
[ 15.663099] type=1400 audit(1488936704.131:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=470 comm="apparmor_parser"
[ 15.663113] type=1400 audit(1488936704.131:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
[ 15.669227] type=1400 audit(1488936704.139:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=470 comm="apparmor_parser"
[ 15.669259] type=1400 audit(1488936704.139:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
[ 15.674545] type=1400 audit(1488936704.143:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
[ 15.710355] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 15.724806] radeon 0000:00:01.0: WB enabled
[ 15.724827] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800a2bb5c00
[ 15.724837] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800a2bb5c0c
[ 15.725975] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900108b2118
[ 15.756748] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.756762] [drm] Driver supports precise vblank timestamp query.
[ 15.756836] radeon 0000:00:01.0: irq 46 for MSI/MSI-X
[ 15.756883] radeon 0000:00:01.0: radeon: using MSI.
[ 15.756949] [drm] radeon: irq initialized.
[ 15.863651] [drm] ring test on 0 succeeded in 1 usecs
[ 15.865246] [drm] ring test on 3 succeeded in 1 usecs
[ 15.929733] cfg80211: Calling CRDA to update world regulatory domain
[ 15.931121] [drm] ring test on 5 succeeded in 1 usecs
[ 15.952026] [drm] UVD initialized successfully.
[ 15.973878] [drm] Enabling audio 0 support
[ 15.973945] [drm] ib test on ring 0 succeeded in 0 usecs
[ 15.973987] [drm] ib test on ring 3 succeeded in 0 usecs
[ 16.010712] Linux video capture interface: v2.00
[ 16.045924] [drm] ib test on ring 5 succeeded
[ 16.086294] init: cups main process (471) killed by HUP signal
[ 16.086351] init: cups main process ended, respawning
[ 16.088775] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 16.247270] [drm] radeon atom DIG backlight initialized
[ 16.247291] [drm] Radeon Display Connectors
[ 16.247296] [drm] Connector 0:
[ 16.247303] [drm] LVDS-1
[ 16.247308] [drm] HPD1
[ 16.247315] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 16.247319] [drm] Encoders:
[ 16.247323] [drm] LCD1: INTERNAL_UNIPHY
[ 16.247327] [drm] Connector 1:
[ 16.247332] [drm] HDMI-A-1
[ 16.247335] [drm] HPD2
[ 16.247341] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 16.247344] [drm] Encoders:
[ 16.247348] [drm] DFP1: INTERNAL_UNIPHY
[ 16.247351] [drm] Connector 2:
[ 16.247356] [drm] VGA-1
[ 16.247361] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 16.247365] [drm] Encoders:
[ 16.247369] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 16.247461] [drm] Internal thermal controller without fan control
[ 16.247720] [drm] Found smc ucode version: 0x00010601
[ 16.248075] [drm] radeon: dpm initialized
[ 16.274276] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[ 16.279395] kvm: Nested Virtualization enabled
[ 16.279413] kvm: Nested Paging enabled
[ 16.308337] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input14
[ 16.308730] usbcore: registered new interface driver uvcvideo
[ 16.308737] USB Video Class driver (1.1.1)
[ 16.508157] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 1502 detected
[ 16.537122] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[ 16.626302] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[ 16.629296] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.665690] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[ 16.704774] [drm] fb mappable at 0xD0477000
[ 16.704788] [drm] vram apper at 0xD0000000
[ 16.704793] [drm] size 4325376
[ 16.704798] [drm] fb depth is 24
[ 16.704802] [drm] pitch is 5632
[ 16.705146] fbcon: radeondrmfb (fb0) is primary device
[ 16.785947] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[ 17.159262] asus_wmi: ASUS WMI generic driver loaded
[ 17.180958] asus_wmi: Initialization: 0x1
[ 17.181066] asus_wmi: BIOS WMI version: 0.0
[ 17.181200] asus_wmi: SFUN value: 0x4a0077
[ 17.203724] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input15
[ 17.235881] Console: switching to colour frame buffer device 170x48
[ 17.246514] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 17.246518] radeon 0000:00:01.0: registered panic notifier
[ 17.281112] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
[ 17.284832] hda-intel 0000:00:01.1: Using LPIB position fix
[ 17.284936] snd_hda_intel 0000:00:01.1: irq 47 for MSI/MSI-X
[ 17.292508] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[ 17.330973] HDMI ATI/AMD: no speaker allocation for ELD
[ 17.331908] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input16
[ 17.339264] hda-intel 0000:00:14.2: Using LPIB position fix
[ 17.360308] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 17.398187] autoconfig: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[ 17.398210] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.398216] hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[ 17.398219] mono: mono_out=0x0
[ 17.398223] inputs:
[ 17.398228] Mic=0x29
[ 17.415144] asus_wmi: Backlight controlled by ACPI video driver
[ 17.497028] cfg80211: World regulatory domain updated:
[ 17.497048] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.497056] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.497062] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.497068] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.497073] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.497079] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.545676] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[ 17.956027] init: failsafe main process (564) killed by TERM signal
[ 18.838456] type=1400 audit(1488936707.307:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=712 comm="apparmor_parser"
[ 19.081732] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[ 19.099718] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
[ 19.228443] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.229402] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.254594] alx 0000:02:00.0: irq 48 for MSI/MSI-X
[ 19.258337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.264293] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.966869] audit_printk_skb: 138 callbacks suppressed
[ 21.966883] type=1400 audit(1488936710.435:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1001 comm="apparmor_parser"
[ 22.507948] init: plymouth-upstart-bridge main process ended, respawning
[ 22.534727] init: plymouth-upstart-bridge main process (1008) terminated with status 1
[ 22.534787] init: plymouth-upstart-bridge main process ended, respawning
[ 30.521842] type=1400 audit(1488936718.991:59): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=1257 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=115 ouid=0
[ 45.949084] type=1400 audit(1488936734.415:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1337 comm="apparmor_parser"
[ 45.949117] type=1400 audit(1488936734.415:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1337 comm="apparmor_parser"
[ 45.950444] type=1400 audit(1488936734.415:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1337 comm="apparmor_parser"
[ 3769.365081] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 3769.531040] usb 2-1: New USB device found, idVendor=18f8, idProduct=0f97
[ 3769.531058] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3769.531066] usb 2-1: Product: USB OPTICAL MOUSE
[ 3769.867306] hidraw: raw HID events driver (C) Jiri Kosina
[ 3769.888692] usbcore: registered new interface driver usbhid
[ 3769.888703] usbhid: USB HID core driver
[ 3769.919599] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.0/input/input18
[ 3769.920348] hid-generic 0003:18F8:0F97.0001: input,hidraw0: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:12.0-1/input0
[ 3769.921921] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.1/input/input19
[ 3769.922386] hid-generic 0003:18F8:0F97.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:12.0-1/input1
[ 3806.097735] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 3806.097993] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3806.992971] alx 0000:02:00.0 eth0: Link Down
[ 3808.948988] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 3809.138987] alx 0000:02:00.0 eth0: Link Down
[ 3811.016259] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 3811.425761] alx 0000:02:00.0 eth0: Link Down
[ 3813.286822] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 3817.192379] alx 0000:02:00.0 eth0: Link Down
[ 3819.071199] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 3819.659903] alx 0000:02:00.0 eth0: Link Down
[ 3821.550897] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full

sudo lshw -C network

dmesg

Keep it simple stupid!





11. Re: Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

Guilherme
Ghost_Shell

(usa Arch Linux)

Enviado em 08/03/2017 - 00:03h

sudo ip link dev wlan0 up

sudo service network-manager restart

Vê se sobe.

Keep it simple stupid!


12. Re: Driver Ralink RT5390 Wireless 802.11n 1T/1R PCIe não funciona

Perfil removido
removido

(usa Nenhuma)

Enviado em 07/04/2017 - 14:30h

Usa uma distro com kernel atual.

Ex: Kernel 4.9



Qual a saída do comando?

lspci -v




01 02



Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts