Francisconi
(usa Linux Mint)
Enviado em 12/09/2013 - 18:48h
Galera nesse momento estou usando o Linux Mint 10 64 bits, pois foi o unico que rodou com 90% dos meus componetes.
E quero rodar o Mint 15 mas não funfa teclado, mouse, som, rede...
Lembrando a todos que tenho mouse e teclado wireless Logitech
O que vou postar abaixo são comandos que executei no Mint 10 e quero ver se me ajudam a encontrar uma solução/explicação para esse bug, que acontece com todas as versões Mint desde a 11 até a ultima LMDE.
# dmesg | tail
[ 3.554974] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.648076] r8169 0000:05:00.0: eth0: link up
[ 3.648384] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.061355] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 4.392712] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 4.479604] ppdev: user-space parallel port driver
[ 4.998128] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 5.257633] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.263116] ISO 9660 Extensions: RRIP_1991A
[ 14.400133] eth0: no IPv6 routers present
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# lsusb -v
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-22-generic ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:16.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-22-generic ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:14.5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-22-generic ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 002: ID 046d:c52e Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc52e
bcdDevice 15.00
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 RQR15.00_B0048
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 59
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 177
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0014 1x 20 bytes
bInterval 2
Device Status: 0x0000
(Bus Powered)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-22-generic ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:12.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0103 power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-22-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:16.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-22-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:13.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.35-22-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:12.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# dmesg | grep error
[ 1.570531] kobject_create_and_add: kobject_add error: -17
[ 1.570602] kobject_create_and_add: kobject_add error: -17
[ 1.570674] kobject_create_and_add: kobject_add error: -17
[ 1.570744] kobject_create_and_add: kobject_add error: -17
[ 1.570814] kobject_create_and_add: kobject_add error: -17
[ 1.570883] kobject_create_and_add: kobject_add error: -17
[ 1.570952] kobject_create_and_add: kobject_add error: -17
[ 1.571022] kobject_create_and_add: kobject_add error: -17
[ 1.571094] kobject_create_and_add: kobject_add error: -17
[ 1.571166] kobject_create_and_add: kobject_add error: -17
[ 1.571238] kobject_create_and_add: kobject_add error: -17
[ 1.571310] kobject_create_and_add: kobject_add error: -17
[ 1.571379] kobject_create_and_add: kobject_add error: -17
[ 1.571449] kobject_create_and_add: kobject_add error: -17
[ 1.571518] kobject_create_and_add: kobject_add error: -17
[ 1.571587] kobject_create_and_add: kobject_add error: -17
[ 1.571656] kobject_create_and_add: kobject_add error: -17
[ 1.571725] kobject_create_and_add: kobject_add error: -17
[ 1.571795] kobject_create_and_add: kobject_add error: -17
[ 1.571864] kobject_create_and_add: kobject_add error: -17
[ 1.571933] kobject_create_and_add: kobject_add error: -17
[ 1.572002] kobject_create_and_add: kobject_add error: -17
[ 1.572072] kobject_create_and_add: kobject_add error: -17
[ 1.572141] kobject_create_and_add: kobject_add error: -17
[ 1.572210] kobject_create_and_add: kobject_add error: -17
[ 1.572279] kobject_create_and_add: kobject_add error: -17
[ 1.572348] kobject_create_and_add: kobject_add error: -17
[ 1.572417] kobject_create_and_add: kobject_add error: -17
[ 3.422619] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 4.061355] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 4.392712] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# dmesg | grep ehci_hcd
[ 1.594662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.594697] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.594713] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.594769] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.594804] ehci_hcd 0000:00:12.2: debug port 1
[ 1.594828] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 1.614399] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.614687] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.614706] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.614754] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.614786] ehci_hcd 0000:00:13.2: debug port 1
[ 1.614801] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
[ 1.634397] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.634649] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.634667] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.634713] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.634743] ehci_hcd 0000:00:16.2: debug port 1
[ 1.634757] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
[ 1.654398] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# dmesg | grep ohci_hcd
[ 1.654654] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.654682] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.654701] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.654748] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.654782] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 1.718582] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.718602] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.718651] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.718675] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
[ 1.778550] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.778570] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.778617] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.778637] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 1.838548] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.838569] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.838620] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.838641] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
[ 2.260079] usb 4-3: new full speed USB device using ohci_hcd and address 2
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# inxi -F
System: Host masqueradePC Kernel 2.6.35-22-generic x86_64 (64 bit) Distro Linux Mint 10 Julia
CPU: Octa core AMD FX-8350 Eight-Core (-MCP-) cache 16384 KB flags (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a sse5 ssse3 svm) bmips 64283.5
Clock Speeds: (1) 1400.00 MHz (2) 1400.00 MHz (3) 1400.00 MHz (4) 1400.00 MHz (5) 1400.00 MHz (6) 1400.00 MHz (7) 1400.00 MHz (8) 1400.00 MHz
Graphics: Card ATI Device 68e4 tty res: 237x59 Gfx Data: N/A for root user
Audio: Card-1 ATI SBx00 Azalia (Intel HDA) driver HDA Intel BusID: 00:14.2
Card-2 ATI Manhattan HDMI Audio [Mobility Radeon HD 5000 Series]driver HDA Intel BusID: 01:00.1
Sound: Advanced Linux Sound Architecture Version 1.0.23
Network: Card Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver r8169 v: 2.3LK-NAPI at port b000 BusID: 05:00.0
Disks: HDD Total Size: 120.0GB (2.1% used) 1: /dev/sda Samsung_SSD_840 120.0GB 0C
Partition: ID:/ size: 36G used: 2.4G (7%) fs: ext4 ID:swap-1 size: 8.00GB used: 0.00GB (0%) fs: swap
Info: Processes 238 Uptime 8 min Memory 388.9/2995.4MB Runlevel 2 Client Shell inxi 1.4.12
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# hwinfo --mouse
> hal.1: read hal dataprocess 2583: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
49: USB 00.1: 10503 USB Mouse
[Created at usb.122]
Unique ID: k_sa.b0ZOFsTpR64
Parent ID: zPk0.7qWCOCfUJwE
SysFS ID: /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1
SysFS BusID: 4-3:1.1
Hardware Class: mouse
Model: "Logitech USB Receiver"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc52e "USB Receiver"
Revision: "15.00"
Compatible to: int 0x0210 0x0038
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3, /dev/char/13:67, /dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse, /dev/input/by-path/pci-0000:00:12.0-usb-0:3:1.1-event-mouse, /dev/char/13:32, /dev/input/by-id/usb-Logitech_USB_Receiver-mouse, /dev/input/by-path/pci-0000:00:12.0-usb-0:3:1.1-mouse, /dev/char/13:63
Device Number: char 13:63 (char 13:32)
Speed: 12 Mbps
Module Alias: "usb:v046DpC52Ed1500dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 8
Wheels: 3
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #44 (Hub)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# hwinfo --keyboard
> hal.1: read hal dataprocess 2605: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
25: USB 00.0: 10800 Keyboard
[Created at usb.122]
Unique ID: HpcW.Ze5SG2POyjB
Parent ID: zPk0.7qWCOCfUJwE
SysFS ID: /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0
SysFS BusID: 4-3:1.0
Hardware Class: keyboard
Model: "Logitech USB Receiver"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc52e "USB Receiver"
Revision: "15.00"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/event2
Device Files: /dev/input/event2, /dev/char/13:66, /dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd, /dev/input/by-path/pci-0000:00:12.0-usb-0:3:1.0-event-kbd
Device Number: char 13:66
Speed: 12 Mbps
Module Alias: "usb:v046DpC52Ed1500dc00dsc00dp00ic03isc01ip01"
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #21 (Hub)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# hwinfo --netcard --short
> hal.1: read hal dataprocess 2560: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
network:
eth0 Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
