bacci
(usa Debian)
Enviado em 22/06/2013 - 20:13h
Pessoal, estou tentando instalar o driver de uma placa HBA Qlogic QLE 2462 no Redhat 6.1 e estou recebendo a seguinte mensagem de erro, após executar o script do fabricante:
[root@srv1 extras]# ./build.sh install
QLA2XXX -- Building the qla2xxx driver...
make: *** /lib/modules/2.6.32-131.0.15.el6.x86_64/build: Arquivo ou diretório não encontrado. Pare.
QLA2XXX -- Installing the qla2xxx modules to /lib/modules/2.6.32-131.0.15.el6.x86_64/extra/qlgc-qla2xxx/...
install: impossÃvel obter estado de "*.ko": Arquivo ou diretório não encontrado
O script contém o seguinte:
#!/bin/sh
# QLogic ISP2xxx/ISP4xxx device driver build script
# Copyright (C) 2003-2011 QLogic Corporation
# (www.qlogic.com)
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2, or (at your option) any
# later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
UNAME=`uname -a`
K_VERSION=`uname -r`
K_LIBS=/lib/modules/${K_VERSION}
K_BUILD_DIR=${K_LIBS}/build
K_SOURCE_DIR=${K_LIBS}/source
K_THREADS=5
SLES=/etc/SuSE-release
RHEL=/etc/redhat-release
UDEV_RULE_DIR=/etc/udev/rules.d/
UDEV_RULE_FILE=99-qla2xxx.rules
UDEV_SCRIPT_DIR=/lib/udev
UDEV_SCRIPT=qla2xxx_udev.sh
UDEV_EARLY_RULE=/etc/udev/rules.d/05-udev-early.rules
UDEV_TMP_RULE=/tmp/tmp.rules
# Determine udev control utility to reload rules
which udevadm 1>/dev/null 2>&1
if [ $? -eq 0 ]
then
RELOAD_RULES='udevadm control --reload-rules'
else
RELOAD_RULES='udevcontrol reload_rules'
fi
BOOTDIR="/boot"
Q_NODE=QLA2XXX
MODULE=qla2xxx
K_INSTALL_DIR=${K_LIBS}/extra/qlgc-qla2xxx/
if test -f "${SLES}" ; then
K_INSTALL_DIR=${K_LIBS}/updates/
fi
if [ "`uname -m`" = "ia64" ]; then
if [ -f "$RHEL" ]; then
BOOTDIR="/boot/efi/efi/redhat"
fi
fi
###
# drv_build -- Generic 'make' command for driver
# $1 -- directive
#
set_variables() {
if [ -f ./qla_os.c ]; then
Q_NODE=QLA2XXX
MODULE=qla2xxx
K_INSTALL_DIR=${K_LIBS}/extra/qlgc-qla2xxx/
if test -f "${SLES}" ; then
K_INSTALL_DIR=${K_LIBS}/updates/
fi
elif [ -f ./ql4_os.c ]; then
Q_NODE=QLA4XXX
MODULE=qla4xxx
K_INSTALL_DIR=${K_LIBS}/extra/qlgc-qla4xxx/
if test -f "${SLES}" ; then
K_INSTALL_DIR=${K_LIBS}/updates/
fi
fi
}
drv_build() {
test -z "$1" && return 1
# Go with build...
if test -f "${SLES}" ; then
# SuSE -------------------------------------------------------
make -j${K_THREADS} -C ${K_SOURCE_DIR} O=${K_BUILD_DIR} M=$PWD $1
else
# Redhat -----------------------------------------------------
make -j${K_THREADS} -C ${K_BUILD_DIR} M=$PWD $1
fi
}
udev_install()
{
RET=0
diff ./extras/${UDEV_RULE_FILE} ${UDEV_RULE_DIR}/${UDEV_RULE_FILE} &> /dev/null
RET=$?
diff ./extras/${UDEV_SCRIPT} ${UDEV_SCRIPT_DIR}/${UDEV_SCRIPT} &> /dev/null
(( RET += $? ))
if [ $RET -ne 0 ]; then
echo "${Q_NODE} -- Installing udev rule to capture FW dump..."
cp ./extras/${UDEV_RULE_FILE} ${UDEV_RULE_DIR}/${UDEV_RULE_FILE}
cp ./extras/${UDEV_SCRIPT} ${UDEV_SCRIPT_DIR}/${UDEV_SCRIPT}
# comment out the modules ignore_device rule
if [ -e ${UDEV_EARLY_RULE} ]; then
cp ${UDEV_EARLY_RULE} ${UDEV_EARLY_RULE}.bak
cat ${UDEV_EARLY_RULE} | sed "s/\(^SUBSYSTEM==\"module\".*OPTIONS=\"ignore_device\".*\)/#\1/" > ${UDEV_TMP_RULE}
if [ -s ${UDEV_TMP_RULE} ]; then
mv -f ${UDEV_TMP_RULE} ${UDEV_EARLY_RULE}
fi
fi
$RELOAD_RULES
else
echo "${Q_NODE} -- udev rules already installed"
fi
}
udev_remove()
{
rm -f ${UDEV_RULE_DIR}/${UDEV_RULE_FILE} &> /dev/null
rm -f ${UDEV_SCRIPT_DIR}/${UDEV_SCRIPT} &> /dev/null
if [ -e ${UDEV_EARLY_RULE} ]; then
cat ${UDEV_EARLY_RULE} |sed "s/\#\(SUBSYSTEM==\"module\".*OPTIONS=\"ignore_device\".*\)/\1/" > ${UDEV_TMP_RULE}
if [ -s ${UDEV_TMP_RULE} ]; then
echo "${Q_NODE} -- Removing FW capture udev rule..."
mv -f ${UDEV_TMP_RULE} ${UDEV_EARLY_RULE}
$RELOAD_RULES
fi
fi
}
###
# drv_install -- Generic steps for installation
#
drv_install() {
if test $EUID -ne 0 ; then
echo "${Q_NODE} -- Must be root to install..."
return 1
fi
#backup all modules except the one in default path
for module in `find /lib/modules/$K_VERSION -name $MODULE.ko`
do
echo $module | grep "scsi" >& /dev/null
if [ $? -ne 0 ]; then
mv $module $module.org
fi
done
echo "${Q_NODE} -- Installing the $MODULE modules to ${K_INSTALL_DIR}..."
install -d -o root -g root ${K_INSTALL_DIR}
install -o root -g root -m 0644 *.ko ${K_INSTALL_DIR}
# depmod
/sbin/depmod -a
#install the udev rules to capture FW dump
if [ -f ./qla2xxx.ko ]; then
udev_install
fi
}
build_ramdisk () {
echo "${Q_NODE} -- Rebuilding INITRD image..."
if test -f "${SLES}" ; then
if [ ! -f ${BOOTDIR}/initrd-${K_VERSION}.bak ]; then
cp ${BOOTDIR}/initrd-${K_VERSION} ${BOOTDIR}/initrd-${K_VERSION}.bak
fi
mkinitrd -k /boot/vmlinuz-${K_VERSION} -i /boot/initrd-${K_VERSION} >& /dev/null
elif test -f "${RHEL}"; then
# Check if it is RHEL6
REDHAT_REL=`cat ${RHEL} | cut -d " " -f 7 | cut -d . -f 1`
if [ "$REDHAT_REL" -le 5 ]; then
if [ ! -f ${BOOTDIR}/initrd-${K_VERSION}.bak.img ]; then
cp ${BOOTDIR}/initrd-${K_VERSION}.img ${BOOTDIR}/initrd-${K_VERSION}.bak.img
fi
mkinitrd -f /boot/initrd-${KERNEL_VERSION}.img $KERNEL_VERSION >& /dev/null
else
if [ ! -f ${BOOTDIR}/initramfs-${K_VERSION}.bak.img ]; then
cp ${BOOTDIR}/initramfs-${K_VERSION}.img ${BOOTDIR}/initramfs-${K_VERSION}.bak.img
fi
dracut --force /boot/initramfs-${K_VERSION}.img $K_VERSION >& /dev/null
fi
fi
}
###
#
#
case "$1" in
-h | help)
echo "QLogic Corporation -- driver build script"
echo " build.sh <directive>"
echo ""
echo " # cd <driver source>"
echo " # ./extras/build.sh"
echo ""
echo " Build the driver sources based on the standard"
echo " SLES10/SLES11/RHEL5/RHEL6 build environment."
echo ""
echo " # ./extras/build.sh clean"
echo ""
echo " Clean driver source directory of all build files (i.e. "
echo " *.ko, *.o, etc)."
echo ""
echo " # ./extras/build.sh new"
echo ""
echo " Rebuild the driver sources from scratch."
echo " This is essentially a shortcut for:"
echo ""
echo " # ./build.sh clean"
echo " # ./build.sh"
echo ""
echo " # ./extras/build.sh install"
echo ""
echo " Build and install the driver module files."
echo " This command performs the following:"
echo ""
echo " 1. Builds the driver .ko files."
echo " 2. Copies the .ko files to the appropriate "
echo " /lib/modules/... directory."
echo ""
echo " # ./extras/build.sh remove"
echo ""
echo " Remove/uninstall the driver module files."
echo " This command performs the following:"
echo ""
echo " 1. Uninstalls the driver .ko files from appropriate."
echo " /lib/modules/... directory."
echo " 2. Rebuilds the initrd image with the /sbin/mk_initrd"
echo " command."
echo ""
echo " # ./extras/build.sh initrd"
echo ""
echo " Build, install, and update the initrd image."
echo " This command performs the following:"
echo ""
echo " 1. All steps in the 'install' directive."
echo " 2. Rebuilds the initrd image with the /sbin/mk_initrd"
echo " command."
echo ""
;;
-i | install)
set_variables
echo "${Q_NODE} -- Building the $MODULE driver..."
drv_build modules
drv_install
;;
-r | remove)
set_variables
echo "${Q_NODE} -- Building the $MODULE driver..."
if [ -f ${K_INSTALL_DIR}/$MODULE.ko ]; then
rm ${K_INSTALL_DIR}/$MODULE.ko
/sbin/depmod -a
build_ramdisk
if [ "$Q_NODE" == "QLA2XXX" ]; then
udev_remove
fi
fi
;;
initrd)
set_variables
echo "${Q_NODE} -- Building the $MODULE driver..."
drv_build modules
drv_install
build_ramdisk
;;
clean)
echo "${Q_NODE} -- Cleaning driver build directory..."
drv_build clean
;;
new)
set_variables
echo "${Q_NODE} -- Building the $MODULE driver..."
drv_build clean
drv_build modules
;;
*)
set_variables
echo "${Q_NODE} -- Building the $MODULE driver..."
drv_build modules
;;
esac
Alguém poderia me dar uma força?