Backup Fita [RESOLVIDO]

lmbleandro
(usa Ubuntu)

Enviado em 07/02/2013 - 10:18h

Bom dia a todos !
Adquiri um equipamento de fita Ultrium 448 LTO-2 só que não consigo fazer funcionar.
Rodo o comando cat /proc/scsi/scsi que me retorna
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: ATAPI-CD Model: ROM-DRIVE-56MAX Rev: 56LP
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST3146855LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST3146855LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 04 Lun: 00
Vendor: HP Model: Ultrium 2-SCSI Rev: S22D
Type: Sequential-Access ANSI SCSI revision: 03

Como podem ver ele é listado.

Rodei tambem sudo dmesg | grep scsi
que retornou a lista abaixo ( a qual não entendi nada)
032031] scsi2: bus reset still active
[ 507.036025] scsi 2:0:10:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 507.036572] scsi2: At time of recovery, card was not paused
[ 507.036581] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 507.036985] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 507.037087] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 507.037237] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 507.037242] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 507.037247] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 507.037274] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 507.037285] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 507.037348] scsi2:0:10:0: Cmd aborted from QINFIFO
[ 507.037379] scsi 2:0:10:0: Device offlined - not ready after error recovery
[ 528.032043] scsi 2:0:11:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 528.032592] scsi2: At time of recovery, card was not paused
[ 528.032601] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 528.032998] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 528.033097] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 528.033246] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 528.033251] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 528.033256] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 528.033282] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 528.033293] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 528.033356] scsi2:0:11:0: Cmd aborted from QINFIFO
[ 538.032028] scsi 2:0:11:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 538.032576] scsi2: At time of recovery, card was not paused
[ 538.032585] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 538.032988] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 538.033090] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 538.033240] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 538.033245] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 538.033250] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 538.033277] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 538.033288] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 538.033352] scsi2:0:11:0: Cmd aborted from QINFIFO
[ 538.033388] scsi 2:0:11:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 538.033401] scsi2: Device reset code sleeping
[ 543.032023] scsi2: Device reset timer expired (active 1)
[ 543.032028] scsi2: Device reset returning 0x2003
[ 543.032036] scsi2: bus reset still active
[ 563.036025] scsi 2:0:11:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 563.036572] scsi2: At time of recovery, card was not paused
[ 563.036581] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 563.036999] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 563.037101] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 563.037252] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 563.037257] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 563.037263] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 563.037290] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 563.037301] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 563.037364] scsi2:0:11:0: Cmd aborted from QINFIFO
[ 563.037395] scsi 2:0:11:0: Device offlined - not ready after error recovery
[ 584.032046] scsi 2:0:12:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 584.032596] scsi2: At time of recovery, card was not paused
[ 584.032605] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 584.033014] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 584.033114] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 584.033261] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 584.033266] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 584.033271] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 584.033297] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 584.033308] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 584.033371] scsi2:0:12:0: Cmd aborted from QINFIFO
[ 594.032039] scsi 2:0:12:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 594.032587] scsi2: At time of recovery, card was not paused
[ 594.032596] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 594.033008] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 594.033108] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 594.033255] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 594.033260] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 594.033265] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 594.033291] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 594.033302] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 594.033365] scsi2:0:12:0: Cmd aborted from QINFIFO
[ 594.033401] scsi 2:0:12:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 594.033413] scsi2: Device reset code sleeping
[ 599.032023] scsi2: Device reset timer expired (active 1)
[ 599.032028] scsi2: Device reset returning 0x2003
[ 599.032037] scsi2: bus reset still active
[ 619.036031] scsi 2:0:12:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 619.036580] scsi2: At time of recovery, card was not paused
[ 619.036589] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 619.037024] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 619.037127] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 619.037279] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 619.037285] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 619.037290] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 619.037318] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 619.037329] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 619.037392] scsi2:0:12:0: Cmd aborted from QINFIFO
[ 619.037423] scsi 2:0:12:0: Device offlined - not ready after error recovery
[ 640.032045] scsi 2:0:13:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 640.032594] scsi2: At time of recovery, card was not paused
[ 640.032603] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 640.033035] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 640.033136] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 640.033286] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 640.033291] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 640.033296] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 640.033323] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 640.033334] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 640.033398] scsi2:0:13:0: Cmd aborted from QINFIFO
[ 650.032026] scsi 2:0:13:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 650.032575] scsi2: At time of recovery, card was not paused
[ 650.032584] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 650.033017] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 650.033118] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 650.033268] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 650.033273] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 650.033278] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 650.033306] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 650.033316] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 650.033380] scsi2:0:13:0: Cmd aborted from QINFIFO
[ 650.033417] scsi 2:0:13:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 650.033429] scsi2: Device reset code sleeping
[ 655.032023] scsi2: Device reset timer expired (active 1)
[ 655.032028] scsi2: Device reset returning 0x2003
[ 655.032036] scsi2: bus reset still active
[ 675.036028] scsi 2:0:13:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 675.036577] scsi2: At time of recovery, card was not paused
[ 675.036586] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 675.037036] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 675.037139] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 675.037290] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 675.037296] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 675.037301] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 675.037329] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 675.037339] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 675.037403] scsi2:0:13:0: Cmd aborted from QINFIFO
[ 675.037434] scsi 2:0:13:0: Device offlined - not ready after error recovery
[ 696.032028] scsi 2:0:14:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 696.032576] scsi2: At time of recovery, card was not paused
[ 696.032585] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 696.033028] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 696.033129] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 696.033279] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 696.033284] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 696.033289] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 696.033316] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 696.033327] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 696.033391] scsi2:0:14:0: Cmd aborted from QINFIFO
[ 706.032048] scsi 2:0:14:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 706.032599] scsi2: At time of recovery, card was not paused
[ 706.032608] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 706.033042] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 706.033141] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 706.033288] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 706.033293] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 706.033298] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 706.033324] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 706.033334] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 706.033397] scsi2:0:14:0: Cmd aborted from QINFIFO
[ 706.033434] scsi 2:0:14:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 706.033445] scsi2: Device reset code sleeping
[ 711.032036] scsi2: Device reset timer expired (active 1)
[ 711.032041] scsi2: Device reset returning 0x2003
[ 711.032050] scsi2: bus reset still active
[ 731.036029] scsi 2:0:14:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 731.036578] scsi2: At time of recovery, card was not paused
[ 731.036587] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 731.037050] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 731.037153] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 731.037306] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 731.037312] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 731.037317] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 731.037345] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 731.037356] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 731.037420] scsi2:0:14:0: Cmd aborted from QINFIFO
[ 731.037450] scsi 2:0:14:0: Device offlined - not ready after error recovery
[ 752.032035] scsi 2:0:15:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 752.032584] scsi2: At time of recovery, card was not paused
[ 752.032593] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 752.033051] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 752.033153] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 752.033304] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 752.033310] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 752.033315] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 752.033342] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 752.033353] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 752.033417] scsi2:0:15:0: Cmd aborted from QINFIFO
[ 762.032040] scsi 2:0:15:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 762.032589] scsi2: At time of recovery, card was not paused
[ 762.032598] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 762.033043] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 762.033141] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 762.033288] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 762.033293] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 762.033298] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 762.033324] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 762.033334] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 762.033397] scsi2:0:15:0: Cmd aborted from QINFIFO
[ 762.033433] scsi 2:0:15:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 762.033445] scsi2: Device reset code sleeping
[ 767.032021] scsi2: Device reset timer expired (active 1)
[ 767.032026] scsi2: Device reset returning 0x2003
[ 767.032034] scsi2: bus reset still active
[ 787.036020] scsi 2:0:15:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 787.036566] scsi2: At time of recovery, card was not paused
[ 787.036575] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 787.037042] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 787.037144] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 787.037295] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 787.037300] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 787.037305] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 787.037333] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 787.037343] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 787.037407] scsi2:0:15:0: Cmd aborted from QINFIFO
[ 787.037438] scsi 2:0:15:0: Device offlined - not ready after error recovery
[ 787.038092] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 787.038690] sd 2:0:1:0: Attached scsi generic sg2 type 0
[ 787.039248] scsi 2:0:4:0: Attached scsi generic sg3 type 1
[ 791.365910] st 2:0:4:0: Attached scsi tape st0
[ 818.016579] scsi2: At time of recovery, card was not paused
[ 818.016589] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 818.017072] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 818.017174] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 818.017325] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 818.017331] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 818.017336] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 818.017363] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 818.017374] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 818.017439] scsi2:0:0:0: Cmd aborted from QINFIFO
[ 818.018007] scsi2: At time of recovery, card was not paused
[ 818.018015] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 818.018462] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 818.018560] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 818.018707] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 818.018712] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 818.018717] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 818.018743] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 818.018754] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 818.018816] scsi2:0:1:0: Cmd aborted from QINFIFO
[ 828.016581] scsi2: At time of recovery, card was not paused
[ 828.016590] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 828.017061] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 828.017162] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 828.017312] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 828.017317] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 828.017322] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 828.017350] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 828.017360] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 828.017424] scsi2:0:0:0: Cmd aborted from QINFIFO
[ 838.016573] scsi2: At time of recovery, card was not paused
[ 838.016582] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 838.017053] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 838.017155] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 838.017305] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 838.017310] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 838.017316] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 838.017343] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 838.017353] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 838.017417] scsi2:0:1:0: Cmd aborted from QINFIFO
[ 838.017465] scsi2: Device reset code sleeping
[ 843.016032] scsi2: Device reset timer expired (active 1)
[ 843.016038] scsi2: Device reset returning 0x2003
[ 843.016062] scsi2: Device reset code sleeping
[ 848.016037] scsi2: Device reset timer expired (active 1)
[ 848.016043] scsi2: Device reset returning 0x2003
[ 848.016053] scsi2: bus reset still active
[ 868.020578] scsi2: At time of recovery, card was not paused
[ 868.020587] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 868.021082] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 868.021185] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 868.021336] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 868.021341] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 868.021347] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 868.021374] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 868.021385] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 868.021449] scsi2:0:1:0: Cmd aborted from QINFIFO
[ 878.020571] scsi2: At time of recovery, card was not paused
[ 878.020580] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 878.021078] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 878.021180] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 878.021331] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 878.021337] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 878.021342] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 878.021369] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 878.021380] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 878.021444] scsi2:0:0:0: Cmd aborted from QINFIFO
[ 939.104592] scsi2: At time of recovery, card was not paused
[ 939.104601] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 939.105099] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 939.105202] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 939.105353] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 939.105358] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 939.105364] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 939.105391] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 939.105402] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 939.105466] scsi2:0:4:0: Cmd aborted from QINFIFO
[ 949.104572] scsi2: At time of recovery, card was not paused
[ 949.104581] scsi2: Dumping Card State at program address 0xf6 Mode 0x11
[ 949.105082] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 949.105185] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 949.105337] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 949.105343] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 949.105348] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 949.105376] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 949.105387] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 949.105451] scsi2:0:4:0: Cmd aborted from QINFIFO
[ 949.105498] scsi2: Device reset code sleeping
[ 954.104020] scsi2: Device reset timer expired (active 5)
[ 954.104025] scsi2: Device reset returning 0x2003
[ 954.104034] scsi2: bus reset still active
[ 974.108570] scsi2: At time of recovery, card was not paused
[ 974.108579] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 974.109088] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 974.109190] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 974.109341] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 974.109347] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 974.109352] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 974.109380] scsi2: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x10a
[ 974.109391] scsi2: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbb
[ 974.109455] scsi2:0:4:0: Cmd aborted from QINFIFO

Rodei este tambem ls -l /dev/ | grep st, e retornou

crw-rw---- 1 root tape 9, 128 Fev 7 11:11 nst0
crw-rw---- 1 root tape 9, 224 Fev 7 11:09 nst0a
crw-rw---- 1 root tape 9, 160 Fev 7 11:09 nst0l
crw-rw---- 1 root tape 9, 192 Fev 7 11:09 nst0m
crw-rw---- 1 root tape 9, 0 Fev 7 11:11 st0
crw-rw---- 1 root tape 9, 96 Fev 7 11:09 st0a
crw-rw---- 1 root tape 9, 32 Fev 7 11:09 st0l
crw-rw---- 1 root tape 9, 64 Fev 7 11:09 st0m
lrwxrwxrwx 1 root root 15 Fev 7 10:56 stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 Fev 7 10:56 stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 Fev 7 10:56 stdout -> /proc/self/fd/1

Mas quando dou qualquer comando para a manipulaçã de fita, tipo ejetar não funciona, como mostrado abaixo.

sudo mt -f /dev/nst0 eject
mt: /dev/nst0: rmtopen failed: No such device or address


Alguem pode me ajudar ?

danniel-lara
(usa Fedora)

Enviado em 07/02/2013 - 10:21h

sudo mt -f /dev/st0 eject

já testou com st0 ?

lmbleandro
(usa Ubuntu)

Enviado em 07/02/2013 - 10:50h

não entendi ?

danniel-lara
(usa Fedora)

Enviado em 07/02/2013 - 12:02h

no lugar de nst0 usa o st0

removido
(usa Nenhuma)

Enviado em 07/02/2013 - 12:21h

O Daniel tem razão!

Trecho do seu log:

[ 787.038690] sd 2:0:1:0: Attached scsi generic sg2 type 0
[ 787.039248] scsi 2:0:4:0: Attached scsi generic sg3 type 1
[ 791.365910] st 2:0:4:0: Attached scsi tape st0
[ 818.016579] scsi2: At time of recovery, card was not paused
[ 818.016589] scsi2: Dumping Card State at program address 0xf7 Mode 0x11
[ 818.017072] scsi2: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 818.017174] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 818.017325] scsi2: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 818.017331] scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 818.017336] scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0

lmbleandro
(usa Ubuntu)

Enviado em 08/02/2013 - 10:05h

Olá amigos, agora entendi. Aquele foi só um teste baseado ls /dev | grep st, ao qual ele me isto.
crw-rw---- 1 root tape 9, 128 2013-02-08 11:50 nst0
crw-rw---- 1 root tape 9, 224 2013-02-08 11:50 nst0a
crw-rw---- 1 root tape 9, 160 2013-02-08 11:50 nst0l
crw-rw---- 1 root tape 9, 192 2013-02-08 11:50 nst0m
lrwxrwxrwx 1 root root 24 2013-02-08 11:50 sndstat -> /proc/asound/oss/sndstat
crw-rw---- 1 root tape 9, 0 2013-02-08 11:50 st0
crw-rw---- 1 root tape 9, 96 2013-02-08 11:50 st0a
crw-rw---- 1 root tape 9, 32 2013-02-08 11:50 st0l
crw-rw---- 1 root tape 9, 64 2013-02-08 11:50 st0m
lrwxrwxrwx 1 root root 15 2013-02-08 11:50 stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 2013-02-08 11:50 stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 2013-02-08 11:50 stdout -> /proc/self/fd/1

No desespero eu cada um e acabei postando o nst0. Desculpe. Mas com st0 da há mesma informação.

removido
(usa Nenhuma)

Enviado em 08/02/2013 - 11:08h

Então ele não está montando.

Brother... Já tive um problema desses com Red Hat Enterprise 4.8. Foi instalado uma unidade de fita da IBM e ele não montava nem a pau!
No meu caso a solução foi recompilar o kernel.

lmbleandro
(usa Ubuntu)

Enviado em 08/02/2013 - 13:45h

Amarildo, o que vc diz por montar ?
Quanto a recompilar o Kernel, não tenha idéia de como se faz isso. rs.
Obrigado pela atenção.

removido
(usa Nenhuma)

Enviado em 09/02/2013 - 11:29h

Iaê velhinho!

Di boa?

Qual é a distro? e o Kernel?

$ cat /etc/issue

$ uname -mrs

Posta ai.

ahhh.... Tu já leu o manual da Ultrium 448 LTO-2? Veja a lista de S.Os homologados.

Apesar que ele foi listado com seu comando.

$ cat /proc/scsi/scsi

Attached devices:

Host: scsi2 Channel: 00 Id: 04 Lun: 00

Vendor: HP Model: Ultrium 2-SCSI Rev: S22D

Type: Sequential-Access ANSI SCSI revision: 03 

removido
(usa Nenhuma)

Enviado em 09/02/2013 - 12:02h

Faz o seguinte...

Instala o pacote dump e tenta manipular com o restore.

* Exemplos


* Gravando:
# cd /backup/backpMysql
# dump -0f /dev/st0 .


* Listando:
# restore -tvf /dev/st0

Verify tape and initialize maps

Input is from a local tape

Tape block size is 32

Dump   date: Sat Feb  9 01:30:01 2013

Dumped from: the epoch

Level 0 dump of /backup (dir /backupMysql) on nabucodonosor:/dev/sda6

Label: none

Extract directories from tape

Initialize symbol table.

dir          2	.

dir    3407873	./backupMysql

leaf   3407874	./backupMysql/backup.log

leaf   3407875	./backupMysql/my.cnf

leaf   3407876	./backupMysql/nabucodonosor20130208.bkp

leaf   3407877	./backupMysql/mysqlbkp.log

 

* Restaurando:
# cd /backup/restaurados
# restore -rvf /dev/st0

Com -i permite restaurar de uma forma interativa.

# restore -ivf /dev/st0

Verify tape and initialize maps

Input is from a local tape

Tape block size is 32

Dump   date: Sat Feb  9 01:30:01 2013

Dumped from: the epoch

Level 0 dump of /backup (dir /backupMysql) on nabucodonosor:/dev/sda6

Label: none

Extract directories from tape

Initialize symbol table.

restore > help

Available commands are:

	ls [arg] - list directory

	cd arg - change directory

	pwd - print current directory

	add [arg] - add `arg' to list of files to be extracted

	delete [arg] - delete `arg' from list of files to be extracted

	extract - extract requested files

	setmodes - set modes of requested directories

	quit - immediately exit program

	what - list dump header information

	verbose - toggle verbose flag (useful with ``ls'')

	prompt - toggle the prompt display

	help or `?' - print this list

If no `arg' is supplied, the current directory is used

restore >  

lmbleandro
(usa Ubuntu)

Enviado em 14/02/2013 - 08:46h

Bom dia,
Estive fora estes dias (carnaval, sabe com é :) )
Amarildo, vou testar e te informo. Só não garanto ser hj. Abçs e Obrigado.

lmbleandro
(usa Ubuntu)

Enviado em 15/02/2013 - 11:55h

Fala galera,
finalmente consegui resolver o problema da fita. Acho que teve uma parte importante que não citei.
Toda vez que ligava o servidor com o dispositivo de fita ligada ele me mostrava a seguinte frase:
ALERT! /dev/disk/by-uuid/ does not exist trocar uuid
Mostrava a uuid da minha partição "/". Era como se ele confundisse o novo dispositivo e atribui-se a ele esta uuid. Daí dizia que era impossível montar e conseqüentemente o linux não subia.
Quando Ligava sem a "FITA" ligava normal.

O que fiz hj foi. Minha placa scsi tem 3 entradas, duas internas e 1 externa. Passei a q estava conectada para a que estava vazia e o servidor iniciou com o DISPOSITIVO conectado. lsscsi achou todos os dispositivos. E os comandos referentes a fita, ejecte e rewind, funcionaram.

Resumindo: Vou só trocar a porta!

#Vivendo e aprendendo.

Obrigado a tds que me ajudaram.