Configurar adaptador infravermelho SigmaTel, Inc. STIr4200 IrDA Bridge

ca.as
(usa Ubuntu)

Enviado em 17/10/2012 - 00:25h

Estou tentando configura um adaptador usb infravermelho já procurei em varios sites e esta ficando cansativo pretendo usar o infravermelho com lirc para copiar controle remotos se os amigos puderem ajudar eu ficarei muito agradecido. Essa tarefa é daquelas que quando aprendemos não esquecemos mais! Gostaria de saber onde estou errando.


O produto é está no link<http://www.mercadoimportados.com.br/products/Mini-adaptador-de-USB-para-adaptador-IrDA-%28prata%29.html> funciona bem Windows mas este sistema não me interessa...


claudio@claudio-desktop:~$ lsusb
Bus 002 Device 004: ID 066f:4200 SigmaTel, Inc. STIr4200 IrDA Bridge

Ao comando: modprobe irda_usb stir4200

Recebo a informação:

# sudo modprobe irda_usb stir4200
FATAL: Error inserting irda_usb (/lib/modules/2.6.38-13-generic-pae/kernel/drivers/net/irda/irda-usb.ko): Unknown symbol in module, or unknown parameter (see dmesg)

No CD de Instalação existe 3 arquivos:
ReadMe.txt
Makefile
pl2303.c

no script Makefile segue abaixo:

# USB-Serial Makefile
#
# USAGE:
# To install driver -
# make inst (The Makefile will check the module and compile and link it automatically. It will also remove
# the loaded USB-Serial driver)
#
# To uninstall driver -
# make uninst
#
# To uninstall all drivers (including base driver) -
# make uninst_all
#
# To remove module (*.o) files -
# make clean
#
#KINCLUDES=/usr/src/linux-2.4/include
#DRVINCLUDES=/usr/src/linux-2.4/drivers/usb/serial
KINCLUDES=/usr/src/linux-headers-2.6.38-13-generic-pae/include
DRVINCLUDES=/usr/src/linux-headers-2.6.38-13-generic-pae/drivers/usb/serial

# uncomment line below if you have SMP
#SMPFLAGS= -D__SMP__ -DCONFIG_SMP=1

# Unless you have a 386/486, you shouldn't need
# to change anything below here...

# CPUFLAGS= -DCPU=586 -march=i586
MODULE= pl2303
BASE_MODULE= usbserial
CC= gcc
CPPFLAGS= -D__KERNEL__ -I$(KINCLUDES) -I$(DRVINCLUDES)
MODFLAGS= -DMODULE
KERNFLAGS= $(CPPFLAGS) $(CPUFLAGS) $(SMPFLAGS) \
-Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer \
-fno-strict-aliasing -fno-common -Wno-unused
# EXTRA_CFLAGS= -DEXPORT_SYMTAB
# DBGCFLAGS= -DDEBUG -DCONFIG_USB_SERIAL_DEBUG
CFLAGS= $(KERNFLAGS) $(DBGCFLAGS) $(MODFLAGS)

RELVER= $(shell uname -r)

all:: $(MODULE).o

$(MODULE).o: $(MODULE).c
$(CC) $(CFLAGS) -c $<

.PHONY: inst, uninst, uninst_all, clean

inst: $(MODULE).o
ifneq (,$(findstring $(MODULE),$(shell lsmod | grep $(MODULE)))) # if module was already loaded
rmmod $(MODULE)
insmod ./$(MODULE).o
else
ifeq (,$(findstring $(BASE_MODULE),$(shell lsmod | grep $(BASE_MODULE)))) # if there is no base module
insmod /lib/modules/$(RELVER)/kernel/drivers/usb/serial/$(BASE_MODULE).o
endif
insmod ./$(MODULE).o
endif
@echo
@echo ">> Please unplug and plug the cable if it is already plugged-in. <<"
@echo

uninst:
ifneq (,$(findstring $(MODULE),$(shell lsmod | grep $(MODULE)))) # if module was loaded
rmmod $(MODULE)
endif
@echo
@echo ">> The USB-Serial driver is removed! <<"
@echo

uninst_all:
ifneq (,$(findstring $(MODULE),$(shell lsmod | grep $(MODULE)))) # if module was loaded
rmmod $(MODULE)
endif
ifneq (,$(findstring $(BASE_MODULE),$(shell lsmod | grep $(BASE_MODULE)))) # if base module was loaded
rmmod $(BASE_MODULE)
endif
@echo
@echo ">> The USB-Serial and base driver are removed! <<"
@echo

clean:
rm -f *.o



----------------------------------------------------------------------------------
Quando dou o comando: make inst

root@claudio-desktop:/home/claudio/Redhat9# make inst

Recebo:

pl2303.c:33:26: fatal error: linux/config.h: Arquivo ou diretório não encontrado
compilation terminated.
make: ** [pl2303.o] Erro 1

Tento outro comando: ./Makefile

root@claudio-desktop:/home/claudio/Redhat9# ./Makefile

Recebo:

./Makefile: linha 21: $'\r': comando não encontrado
./Makefile: linha 24: $'\r': comando não encontrado
./Makefile: linha 27: $'\r': comando não encontrado
./Makefile: linha 29: $'pl2303\r': comando não encontrado
./Makefile: linha 30: $'usbserial\r': comando não encontrado
./Makefile: linha 31: $'gcc\r': comando não encontrado
./Makefile: linha 32: KINCLUDES: comando não encontrado
./Makefile: linha 32: DRVINCLUDES: comando não encontrado
./Makefile: linha 32: -D__KERNEL__: comando não encontrado
./Makefile: linha 33: $'-DMODULE\r': comando não encontrado
./Makefile: linha 34: CPPFLAGS: comando não encontrado
./Makefile: linha 34: CPUFLAGS: comando não encontrado
./Makefile: linha 34: SMPFLAGS: comando não encontrado
./Makefile: linha 34: $'\r': comando não encontrado
./Makefile: linha 35: -Wall: comando não encontrado
./Makefile: linha 36: -fno-strict-aliasing: comando não encontrado
./Makefile: linha 39: KERNFLAGS: comando não encontrado
./Makefile: linha 39: DBGCFLAGS: comando não encontrado
./Makefile: linha 39: MODFLAGS: comando não encontrado
./Makefile: linha 39: $'\r': comando não encontrado
./Makefile: linha 40: $'\r': comando não encontrado

------------------------------------------------------------------------------


No script pl2303.c segue abaixo:


/*
* Prolific PL2303 USB to serial adaptor driver
*
* Copyright (C) 2001-2002 Greg Kroah-Hartman (greg@kroah.com)
*
* Original driver for 2.2.x by anonymous
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
* 2001_Oct_06 gkh
* Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
*
* 2001_Sep_19 gkh
* Added break support.
*
* 2001_Aug_30 gkh
* fixed oops in write_bulk_callback.
*
* 2001_Aug_28 gkh
* reworked buffer logic to be like other usb-serial drivers. Hopefully
* removing some reported problems.
*
* 2001_Jun_06 gkh
* finished porting to 2.4 format.
*
*/

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>

#ifdef CONFIG_USB_SERIAL_DEBUG
static int debug = 1;
#else
static int debug;
#endif

#include "usb-serial.h"
#include "pl2303.h"

/*
* Version Information
*/
#define DRIVER_VERSION "v0.91"
#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"



static struct usb_device_id id_table [] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
{ } /* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table);


#define SET_LINE_REQUEST_TYPE 0x21
#define SET_LINE_REQUEST 0x20

#define SET_CONTROL_REQUEST_TYPE 0x21
#define SET_CONTROL_REQUEST 0x22
#define CONTROL_DTR 0x01
#define CONTROL_RTS 0x02

#define BREAK_REQUEST_TYPE 0x21
#define BREAK_REQUEST 0x23
#define BREAK_ON 0xffff
#define BREAK_OFF 0x0000

#define GET_LINE_REQUEST_TYPE 0xa1
#define GET_LINE_REQUEST 0x21

#define VENDOR_WRITE_REQUEST_TYPE 0x40
#define VENDOR_WRITE_REQUEST 0x01

#define VENDOR_READ_REQUEST_TYPE 0xc0
#define VENDOR_READ_REQUEST 0x01

/* function prototypes for a PL2303 serial converter */
static int pl2303_open (struct usb_serial_port *port, struct file *filp);
static void pl2303_close (struct usb_serial_port *port, struct file *filp);
static void pl2303_set_termios (struct usb_serial_port *port,
struct termios *old);
static int pl2303_ioctl (struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg);
static void pl2303_read_int_callback (struct urb *urb);
static void pl2303_read_bulk_callback (struct urb *urb);
static void pl2303_write_bulk_callback (struct urb *urb);
static int pl2303_write (struct usb_serial_port *port, int from_user,
const unsigned char *buf, int count);
static void pl2303_break_ctl(struct usb_serial_port *port,int break_state);
static int pl2303_startup (struct usb_serial *serial);
static void pl2303_shutdown (struct usb_serial *serial);


/* All of the device info needed for the PL2303 SIO serial converter */
static struct usb_serial_device_type pl2303_device = {
.owner = THIS_MODULE,
.name = "PL-2303",
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
.open = pl2303_open,
.close = pl2303_close,
.write = pl2303_write,
.ioctl = pl2303_ioctl,
.break_ctl = pl2303_break_ctl,
.set_termios = pl2303_set_termios,
.read_bulk_callback = pl2303_read_bulk_callback,
.read_int_callback = pl2303_read_int_callback,
.write_bulk_callback = pl2303_write_bulk_callback,
.startup = pl2303_startup,
.shutdown = pl2303_shutdown,
};

struct pl2303_private {
u8 line_control;
u8 termios_initialized;
u8 driverType;
};


static int pl2303_startup (struct usb_serial *serial)
{
struct pl2303_private *priv;
int i;

for (i = 0; i < serial->num_ports; ++i) {
priv = kmalloc (sizeof (struct pl2303_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
memset (priv, 0x00, sizeof (struct pl2303_private));
serial->port[i].private = priv;
}
return 0;
}

static int set_control_lines (struct usb_device *dev, u8 value)
{
int retval;

retval = usb_control_msg (dev, usb_sndctrlpipe (dev, 0),
SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
value, 0, NULL, 0, 100);
dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval);
return retval;
}

static int pl2303_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
{
int result;

dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);

if (port->write_urb->status == -EINPROGRESS) {
dbg("%s - already writing", __FUNCTION__);
return 0;
}

count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
if (from_user) {
if (copy_from_user (port->write_urb->transfer_buffer, buf, count))
return -EFAULT;
} else {
memcpy (port->write_urb->transfer_buffer, buf, count);
}

usb_serial_debug_data (__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer);

port->write_urb->transfer_buffer_length = count;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb (port->write_urb);
if (result)
err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
else
result = count;

return result;
}



static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = port->private;
unsigned int cflag;
unsigned char *buf;
int baud;
int i;

dbg("%s - port %d, initialized = %d", __FUNCTION__, port->number,
((struct pl2303_private *) port->private)->termios_initialized);

if ((!port->tty) || (!port->tty->termios)) {
dbg("%s - no tty structures", __FUNCTION__);
return;
}

if (!(((struct pl2303_private *) port->private)->termios_initialized)) {
*(port->tty->termios) = tty_std_termios;
port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
((struct pl2303_private *) port->private)->termios_initialized = 1;
}
cflag = port->tty->termios->c_cflag;
/* check that they really want us to change something */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
dbg("%s - nothing to change...", __FUNCTION__);
return;
}
}

buf = kmalloc (7, GFP_KERNEL);
if (!buf) {
err("%s - out of memory.", __FUNCTION__);
return;
}
memset (buf, 0x00, 0x07);

i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);


i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
0, 1, NULL, 0, 100);

dbg ("0x40:1:0:1 %d", i);

if (cflag & CSIZE) {
switch (cflag & CSIZE) {
case CS5: buf[6] = 5; break;
case CS6: buf[6] = 6; break;
case CS7: buf[6] = 7; break;
default:
case CS8: buf[6] = 8; break;
}
dbg("%s - data bits = %d", __FUNCTION__, buf[6]);
}

baud = 0;
switch (cflag & CBAUD) {
case B0: baud = 0; break;
case B75: baud = 75; break;
case B150: baud = 150; break;
case B300: baud = 1228800; break;
case B600: baud = 600; break;
case B1200: baud = 1200; break;
case B1800: baud = 1800; break;
case B2400: baud = 2400; break;
case B4800: baud = 4800; break;
case B9600: baud = 9600; break;
case B19200: baud = 19200; break;
case B38400: baud = 38400; break;
case B57600: baud = 57600; break;
case B115200: baud = 115200; break;
case B230400: baud = 230400; break;
case B460800: baud = 460800; break;
default:
err ("pl2303 driver does not support the baudrate requested (fix it)");
break;
}
dbg("%s - baud = %d", __FUNCTION__, baud);
if (baud) {
buf[0] = baud & 0xff;
buf[1] = (baud >> 8) & 0xff;
buf[2] = (baud >> 16) & 0xff;
buf[3] = (baud >> 24) & 0xff;
}

/* For reference buf[4]=0 is 1 stop bits */
/* For reference buf[4]=1 is 1.5 stop bits */
/* For reference buf[4]=2 is 2 stop bits */
if (cflag & CSTOPB) {
buf[4] = 2;
dbg("%s - stop bits = 2", __FUNCTION__);
} else {
buf[4] = 0;
dbg("%s - stop bits = 1", __FUNCTION__);
}

if (cflag & PARENB) {
/* For reference buf[5]=0 is none parity */
/* For reference buf[5]=1 is odd parity */
/* For reference buf[5]=2 is even parity */
/* For reference buf[5]=3 is mark parity */
/* For reference buf[5]=4 is space parity */
if (cflag & PARODD) {
buf[5] = 1;
dbg("%s - parity = odd", __FUNCTION__);
} else {
buf[5] = 2;
dbg("%s - parity = even", __FUNCTION__);
}
} else {
buf[5] = 0;
dbg("%s - parity = none", __FUNCTION__);
}

i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
dbg ("0x21:0x20:0:0 %d", i);

if (cflag && CBAUD) {
priv = port->private;
if ((cflag && CBAUD) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
else
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
set_control_lines (serial->dev, priv->line_control);
}

buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;

i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);

if (cflag & CRTSCTS) {
if(priv->driverType == 2) {
i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
0x0, 0x61, NULL, 0, 100);
dbg ("0x40:0x1:0x0:0x61 %d", i);
} else {
i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
0x0, 0x41, NULL, 0, 100);
dbg ("0x40:0x1:0x0:0x41 %d", i);
}
}

kfree (buf);
}


static int pl2303_open (struct usb_serial_port *port, struct file *filp)
{
struct termios tmp_termios;
struct usb_serial *serial = port->serial;
unsigned char buf[10];
int result;
struct pl2303_private *priv = port->private;

if (port_paranoia_check (port, __FUNCTION__))
return -ENODEV;

dbg("%s - port %d", __FUNCTION__, port->number);

if(serial->dev->descriptor.bDeviceClass == 0x02)
priv->driverType = 0;
else if(serial->dev->descriptor.bMaxPacketSize0 == 0x40)
priv->driverType = 2;
else if(serial->dev->descriptor.bDeviceClass == 0x00)
priv->driverType = 1;
else if(serial->dev->descriptor.bDeviceClass == 0xFF)
priv->driverType = 1;

printk("PL-2303 driver type: %d", priv->driverType);

#define FISH(a,b,c,d) \
result=usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev,0), \
b, a, c, d, buf, 1, 100); \
dbg("0x%x:0x%x:0x%x:0x%x %d - %x",a,b,c,d,result,buf[0]);

#define SOUP(a,b,c,d) \
result=usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev,0), \
b, a, c, d, NULL, 0, 100); \
dbg("0x%x:0x%x:0x%x:0x%x %d",a,b,c,d,result);

FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 0);
FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1);
FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1);
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0);

if(priv->driverType == 2) {
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x44);
} else {
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x24);
}

/* Setup termios */
if (port->tty) {
pl2303_set_termios (port, &tmp_termios);
}

//FIXME: need to assert RTS and DTR if CRTSCTS off

dbg("%s - submitting read urb", __FUNCTION__);
port->read_urb->dev = serial->dev;
result = usb_submit_urb (port->read_urb);
if (result) {
err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
pl2303_close (port, NULL);
return -EPROTO;
}

dbg("%s - submitting interrupt urb", __FUNCTION__);
port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb (port->interrupt_in_urb);
if (result) {
err("%s - failed submitting interrupt urb, error %d", __FUNCTION__, result);
pl2303_close (port, NULL);
return -EPROTO;
}
return 0;
}


static void pl2303_close (struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial;
struct pl2303_private *priv;
unsigned int c_cflag;
int result;

if (port_paranoia_check (port, __FUNCTION__))
return;
serial = get_usb_serial (port, __FUNCTION__);
if (!serial)
return;

dbg("%s - port %d", __FUNCTION__, port->number);

if (serial->dev) {
if (port->tty) {
c_cflag = port->tty->termios->c_cflag;
if (c_cflag & HUPCL) {
/* drop DTR and RTS */
priv = port->private;
priv->line_control = 0;
set_control_lines (port->serial->dev,
priv->line_control);
}
}

/* shutdown our urbs */
dbg("%s - shutting down urbs", __FUNCTION__);
result = usb_unlink_urb (port->write_urb);
if (result)
dbg("%s - usb_unlink_urb (write_urb)"
" failed with reason: %d", __FUNCTION__,
result);

result = usb_unlink_urb (port->read_urb);
if (result)
dbg("%s - usb_unlink_urb (read_urb) "
"failed with reason: %d", __FUNCTION__,
result);

result = usb_unlink_urb (port->interrupt_in_urb);
if (result)
dbg("%s - usb_unlink_urb (interrupt_in_urb)"
" failed with reason: %d", __FUNCTION__,
result);
}
}

static int set_modem_info (struct usb_serial_port *port, unsigned int cmd, unsigned int *value)
{
struct pl2303_private *priv = port->private;
unsigned int arg;

if (copy_from_user(&arg, value, sizeof(int)))
return -EFAULT;

switch (cmd) {
case TIOCMBIS:
if (arg & TIOCM_RTS)
priv->line_control |= CONTROL_RTS;
if (arg & TIOCM_DTR)
priv->line_control |= CONTROL_DTR;
break;

case TIOCMBIC:
if (arg & TIOCM_RTS)
priv->line_control &= ~CONTROL_RTS;
if (arg & TIOCM_DTR)
priv->line_control &= ~CONTROL_DTR;
break;

case TIOCMSET:
/* turn off RTS and DTR and then only turn
on what was asked to */
priv->line_control &= ~(CONTROL_RTS | CONTROL_DTR);
priv->line_control |= ((arg & TIOCM_RTS) ? CONTROL_RTS : 0);
priv->line_control |= ((arg & TIOCM_DTR) ? CONTROL_DTR : 0);
break;
}

return set_control_lines (port->serial->dev, priv->line_control);
}

static int get_modem_info (struct usb_serial_port *port, unsigned int *value)
{
struct pl2303_private *priv = port->private;
unsigned int mcr = priv->line_control;
unsigned int result;

result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0)
| ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0);

dbg("%s - result = %x", __FUNCTION__, result);

if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
return 0;
}

static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
{
dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);

switch (cmd) {

case TIOCMGET:
dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number);
return get_modem_info (port, (unsigned int *)arg);

case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, port->number);
return set_modem_info(port, cmd, (unsigned int *) arg);

default:
dbg("%s not supported = 0x%04x", __FUNCTION__, cmd);
break;
}

return -ENOIOCTLCMD;
}


static void pl2303_break_ctl (struct usb_serial_port *port, int break_state)
{
struct usb_serial *serial = port->serial;
u16 state;
int result;

dbg("%s - port %d", __FUNCTION__, port->number);

if (break_state == 0)
state = BREAK_OFF;
else
state = BREAK_ON;
dbg("%s - turning break %s", state==BREAK_OFF ? "off" : "on", __FUNCTION__);

result = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
if (result)
dbg("%s - error sending break = %d", __FUNCTION__, result);
}


static void pl2303_shutdown (struct usb_serial *serial)
{
int i;

dbg("%s", __FUNCTION__);

for (i = 0; i < serial->num_ports; ++i)
kfree (serial->port[i].private);
}


static void pl2303_read_int_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
//unsigned char *data = urb->transfer_buffer;
//int i;

//ints auto restart...

if (!serial) {
return;
}

if (urb->status) {
urb->status = 0;
return;
}

usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
#if 0
//FIXME need to update state of terminal lines variable
#endif

return;
}


static void pl2303_read_bulk_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int i;
int result;

if (port_paranoia_check (port, __FUNCTION__))
return;

dbg("%s - port %d", __FUNCTION__, port->number);

if (!serial) {
dbg("%s - bad serial pointer, exiting", __FUNCTION__);
return;
}

if (urb->status) {
dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
if (!port->open_count) {
dbg("%s - port is closed, exiting.", __FUNCTION__);
return;
}
if (urb->status == -EPROTO) {
/* PL2303 mysteriously fails with -EPROTO reschedule the read */
dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__);
urb->status = 0;
urb->dev = serial->dev;
result = usb_submit_urb(urb);
if (result)
err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
return;
}
dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
return;
}

usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);

tty = port->tty;
if (tty && urb->actual_length) {
for (i = 0; i < urb->actual_length; ++i) {
if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
tty_flip_buffer_push(tty);
}
tty_insert_flip_char (tty, data[i], 0);
}
tty_flip_buffer_push (tty);
}

/* Schedule the next read _if_ we are still open */
if (port->open_count) {
urb->dev = serial->dev;
result = usb_submit_urb(urb);
if (result)
err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
}

return;
}



static void pl2303_write_bulk_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
int result;

if (port_paranoia_check (port, __FUNCTION__))
return;

dbg("%s - port %d", __FUNCTION__, port->number);

if (urb->status) {
/* error in the urb, so we have to resubmit it */
if (serial_paranoia_check (port->serial, __FUNCTION__)) {
return;
}
dbg("%s - Overflow in write", __FUNCTION__);
dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb (port->write_urb);
if (result)
err("%s - failed resubmitting write urb, error %d", __FUNCTION__, result);

return;
}

queue_task(&port->tqueue, &tq_immediate);
mark_bh(IMMEDIATE_BH);

return;
}


static int __init pl2303_init (void)
{
usb_serial_register (&pl2303_device);
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
}


static void __exit pl2303_exit (void)
{
usb_serial_deregister (&pl2303_device);
}


module_init(pl2303_init);
module_exit(pl2303_exit);

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

MODULE_PARM(debug, "i");
MODULE_PARM_DESC(debug, "Debug enabled or not");

---------------------------------------------------------------------------------

O arquivo ReadMe.txt abaixo segue:

To install driver -
make inst (The Makefile will check the module and compile and link it automatically. It will also remove
the loaded USB-Serial driver)

To uninstall driver -
make uninst

To uninstall all drivers (including base driver) -
make uninst_all

To remove module (*.o) files -
make clean

---------------------------------------------------------------------------------
Quando utlizo o comando: sudo modprobe irda_usb stir4200

root@claudio-desktop:/home/claudio/Redhat9# sudo modprobe irda_usb stir4200
FATAL: Error inserting irda_usb (/lib/modules/2.6.38-13-generic-pae/kernel/drivers/net/irda/irda-usb.ko): Unknown symbol in module, or unknown parameter (see dmesg)