Problemas com redirecionamento de portas.
1. Problemas com redirecionamento de portas.
danilo.gbr
(usa Ubuntu)
Enviado em 18/04/2011 - 11:01h
Bom dia a todos,Estou fazendo configuração de um servidor onde preciso redirecionar algumas portas que vão vir externas e internas da rede, para duas maquinas.
Explicando:
Tenho uma servidor que recebe a net IP 192.168.2.250, e quero redirecionar as duas portas dele para porta 80 de outras duas maquinas ficando:
192.168.2.250:11000 --> 192.168.2.248:80
192.168.2.250:12000 --> 192.168.2.251:80
Bem até ai é fácil, o problema é que já existe um firewall nessa maquina, que está com um conectiva 10 e eu não queria retirar esse firewall, queria inserir o que preciso no código já existente, que segue abaixo.
Preciso alterar esse código com uma certa urgência para liberar dois controles internos para os funcionários.
Obrigado pela atenção de todos.
Segue o código:
#!/bin/bash
IPTABLES="/usr/sbin/iptables"
TCP_ALLOW="22 11000 12000"
UDP_ALLOW="6112 6119 4000"
INET_IFACE="eth2"
LAN_IFACE="eth0 eth1"
INTERNAL_LAN="192.168.2.0/24 192.168.0.0/24"
MASQ_LAN="192.168.2.0/24 192.168.0.0/24"
SNAT_LAN=""
DROP="TREJECT"
DENY_ALL=""
DENY_HOSTWISE_TCP=""
DENY_HOSTWISE_UDP=""
BLACKHOLE=""
BLACKHOLE_DROP="DROP"
ALLOW_HOSTWISE_TCP=""
ALLOW_HOSTWISE_UDP=""
TCP_FW=""
UDP_FW=""
MANGLE_TOS_OPTIMIZE="TRUE"
DHCP_SERVER="FALSE"
BAD_ICMP="5 9 10 15 16 17 18 67 68"
ENABLE="Y"
# Flood Params
LOG_FLOOD="2/s"
SYN_FLOOD="20/s"
PING_FLOOD="1/s"
# Outbound filters
# FIXME: Update config help wiki then remove one-liner help
ALLOW_OUT_TCP="" # Internal hosts allowed to be forwarded out on TCP (do not put this/these host/s in INTERNAL_LAN, but do define their method of access [snat, masq] if not a public ip)
PROXY="" # Redirect for Squid or other TRANSPARENT proxy. Syntax to specify the proxy is "host:port".
MY_IP="" # Set to the internal IP of this box (with the firewall), only needed for PROXY=
# Below here is experimental (please report your successes/failures)
MAC_MASQ="" # Currently Broken
MAC_SNAT="" # Ditto...
TTL_SAFE=""
USE_SYNCOOKIES="FALSE"
RP_FILTER="TRUE"
ACCEPT_SOURCE_ROUTE="FALSE"
SUPER_EXEMPT=""
BRAINDEAD_ISP="FALSE"
ALLOW_HOSTWISE_PROTO=""
# Only touch these if you're daring (PREALPHA stuff, as in basically non-functional)
DMZ_IFACE="" # Interface your DMZ is on (leave blank if you don't have one) - Obsolete: Will be removed before 2.4.0
# ----------------------------------------------------------------------|
# These control basic script behavior; there should be no need to |
# change any of these settings for normal use. |
# ----------------------------------------------------------------------|
FILTER_CHAINS="INETIN INETOUT DMZIN DMZOUT TCPACCEPT UDPACCEPT LDROP LREJECT LTREJECT TREJECT"
UL_FILTER_CHAINS="ULDROP ULREJECT ULTREJECT"
LOOP_IFACE="lo"
# Colors
NORMAL="{TTEXTO}33[0m"
GREEN=$'\e[32;01m'
YELLOW=$'\e[33;01m'
RED=$'\e[31;01m'
NORMAL=$'\e[0m'
# Undocumented Features
OVERRIDE_NO_FORWARD="FALSE"
OVERRIDE_SANITY_CHECKS="FALSE"
# ----------------------------------------------------------------------|
# You shouldn't need to modify anything below here |
# Main Script Starts |
# ----------------------------------------------------------------------|
# Let's load it!
echo "Loading iptables firewall:"
# Configuration Sanity Checks
echo -n "Checking configuration..."
if [ "$OVERRIDE_SANITY_CHECKS" = "TRUE" ] ; then
echo "skipped! If it breaks, don't complain!"
echo "If there's a reason you needed to do this, please report to the developers list!"
echo
echo -n "Wait 5 seconds..."
sleep 5
echo "continuing"
echo
echo
else
# Has it been configured?
if ! [ "$ENABLE" = "Y" ] ; then
echo
echo "${RED}You need to *EDIT YOUR CONFIGURATION* and set ENABLE to Y!"
echo "${YELLOW}End User Liscense Agreement:${NORMAL}"
echo -n "$GREEN"
cat << EOF
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1.Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2.Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided
with the distribution.
3.The name of the author may not be used to endorse or promote
products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
EOF
echo "${RED}You need to *EDIT YOUR CONFIGURATION* and set ENABLE to Y!${NORMAL}"
exit 99
fi
# It's hard to run an iptables script without iptables...
if ! [ -x $IPTABLES ] ; then
echo
echo "ERROR IN CONFIGURATION: ${IPTABLES} doesn't exist or isn't executable!"
exit 4
fi
# Basic interface sanity
for dev in ${LAN_IFACE} ; do
if [ "$dev" = "${DMZ_IFACE}" ] && [ "$dev" != "" ]; then
echo
echo "ERROR IN CONFIGURATION: DMZ_IFACE and LAN_IFACE can't have a duplicate interface!"
exit 1
fi
done
# Create a test chain to work with for system ablilities testing
${IPTABLES} -N SYSTEST
if [ "$?" != "0" ] ; then
echo
echo "IPTABLES can't create new chains or the script was interrupted previously!"
echo "Flush IPTABLES rulesets and chains and try again."
exit 4
fi
# Check for ULOG support
${IPTABLES} -A SYSTEST -j ULOG > /dev/null 2>&1
if [ "$?" = "0" ] ; then
HAVE_ULOG="true"
else
HAVE_ULOG="false"
fi
# Check for LOG support
${IPTABLES} -A SYSTEST -j LOG > /dev/null 2>&1
if [ "$?" != "0" ] ; then
echo
echo "Your kernel lacks LOG support reqiored by this script. Aborting."
exit 3
fi
# Check for stateful matching
${IPTABLES} -A SYSTEST -m state --state ESTABLISHED -j ACCEPT > /dev/null 2>&1
if [ "$?" != "0" ] ; then
echo
echo "Your kernel lacks stateful matching, this would break this script. Aborting."
exit 3
fi
# Check for the limit match
${IPTABLES} -A SYSTEST -m limit -j ACCEPT > /dev/null 2>&1
if [ "$?" != "0" ] ; then
echo
echo "Support not found for limiting needed by this script. Aborting."
exit 3
fi
# Check for REJECT
${IPTABLES} -A SYSTEST -j REJECT > /dev/null 2>&1
if [ "$?" != "0" ] ; then
echo
echo "Support not found for the REJECT target needed by this script. Aborting."
exit 3
fi
# Check DROP sanity
if [ "$DROP" = "" ] ; then
echo
echo "There needs to be a DROP policy (try TREJECT)!"
exit 1
fi
if [ "$DROP" = "ACCEPT" ] ; then
echo
echo "The DROP policy is set to ACCEPT; there is no point in loading the firewall as there wouldn't be one."
exit 2
fi
if [ "$DROP" = "ULDROP" ] || [ "$DROP" = "ULREJECT" ] || [ "$DROP" = "ULTREJECT" ] ; then
if [ "$HAVE_ULOG" != "true" ] ; then
echo
echo "You have selected a ULOG policy, but your system lacks ULOG support."
echo "Please choose a policy that your system has support for."
exit 5
fi
fi
# Problems with blackholes?
if [ "$BLACKHOLE" != "" ] && [ "$BLACKHOLE_DROP" = "" ] ; then
echo
echo "You can't use blackholes and not have a policy for them!"
exit 1
fi
# Flush and remove the chain SYSTEST
${IPTABLES} -F SYSTEST
${IPTABLES} -X SYSTEST
# Seems ok...
echo "passed"
fi #from override option
# ===============================================
# ----------------Preprocessing------------------
# ===============================================
# Turn TCP_ALLOW and UDP_ALLOW into ALLOW_HOSTWISE
echo -n "Performing TCP_ALLOW and UDP_ALLOW alias preprocessing..."
if [ "$TCP_ALLOW" != "" ] ; then
for rule in ${TCP_ALLOW} ; do
ALLOW_HOSTWISE_TCP="${ALLOW_HOSTWISE_TCP} 0/0>$rule"
done
fi
if [ "$UDP_ALLOW" != "" ] ; then
for rule in ${UDP_ALLOW} ; do
ALLOW_HOSTWISE_UDP="${ALLOW_HOSTWISE_UDP} 0/0>$rule"
done
fi
echo "done"
# ===============================================
# -------Set some Kernel stuff via SysCTL--------
# ===============================================
# Turn on IP forwarding
if [ "$INTERNAL_LAN" != "" ] && [ "$OVERRIDE_NO_FORWARD" != "TRUE" ] ; then
echo -n "Checking IP Forwarding..."
if [ -e /proc/sys/net/ipv4/ip_forward ] ; then
echo 1 > /proc/sys/net/ipv4/ip_forward
echo "enabled."
else
echo "support not found! This will cause problems if you need to do any routing."
fi
fi
# Enable TCP Syncookies
echo -n "Checking IP SynCookies..."
if [ -e /proc/sys/net/ipv4/tcp_syncookies ] ; then
if [ "$USE_SYNCOOKIES" = "TRUE" ] ; then
echo 1 > /proc/sys/net/ipv4/tcp_syncookies
echo "enabled."
else
echo 0 > /proc/sys/net/ipv4/tcp_syncookies
echo "disabled."
fi
else
echo "support not found, but that's OK."
fi
# Enable Route Verification to prevent martians and other such crud that
# seems to be commonplace on the internet today
echo -n "Checking Route Verification..."
if [ "$INET_IFACE" != "" ] ; then
for dev in ${INET_IFACE} ; do
if [ -e /proc/sys/net/ipv4/conf/$dev/rp_filter ] ; then
if [ "$RP_FILTER" = "TRUE" ] ; then
echo 1 > /proc/sys/net/ipv4/conf/$dev/rp_filter
echo -n "activated:$dev "
else
echo 0 > /proc/sys/net/ipv4/conf/$dev/rp_filter
echo -n "disabled:$dev "
fi
else
echo "not found:$dev "
fi
done
fi
if [ "$LAN_IFACE" != "" ] ; then
for dev in ${LAN_IFACE} ; do
if [ -e /proc/sys/net/ipv4/conf/$dev/rp_filter ] ; then
if [ "$RP_FILTER" = "TRUE" ] ; then
echo 1 > /proc/sys/net/ipv4/conf/$dev/rp_filter
echo -n "activated:$dev "
else
echo 0 > /proc/sys/net/ipv4/conf/$dev/rp_filter
echo -n "disabled:$dev "
fi
else
echo "not found:$dev "
fi
done
fi
if [ "$DMZ_IFACE" != "" ] ; then
if [ -e /proc/sys/net/ipv4/conf/$DMZ_IFACE/rp_filter ] ; then
if [ "$RP_FILTER" = "TRUE" ] ; then
echo 1 > /proc/sys/net/ipv4/conf/$DMZ_IFACE/rp_filter
echo -n "activated:${DMZ_IFACE} "
else
echo 0 > /proc/sys/net/ipv4/conf/$DMZ_IFACE/rp_filter
echo -n "disabled:${DMZ_IFACE} "
fi
else
echo "not found:${DMZ_IFACE} "
fi
fi
echo
# Tell the Kernel to Ignore Source Routed Packets
echo -n "Refusing Source Routed Packets via SysCtl..."
if [ "$INET_IFACE" != "" ] ; then
for dev in ${INET_IFACE} ; do
if [ -e /proc/sys/net/ipv4/conf/$dev/accept_source_route ] ; then
if [ "$ACCEPT_SOURCE_ROUTE" = "TRUE" ] ; then
echo "1" > /proc/sys/net/ipv4/conf/$dev/accept_source_route
echo -n "disabled:$dev "
else
echo "0" > /proc/sys/net/ipv4/conf/$dev/accept_source_route
echo -n "activated:$dev "
fi
else
echo "not found:$dev "
fi
done
fi
if [ "$LAN_IFACE" != "" ] ; then
for dev in ${LAN_IFACE} ; do
if [ -e /proc/sys/net/ipv4/conf/$dev/accept_source_route ] ; then
if [ "$ACCEPT_SOURCE_ROUTE" = "TRUE" ] ; then
echo "1" > /proc/sys/net/ipv4/conf/$dev/accept_source_route
echo -n "disabled:$dev "
else
echo "0" > /proc/sys/net/ipv4/conf/$dev/accept_source_route
echo -n "activated:$dev "
fi
else
echo "not found:$dev "
fi
done
fi
if [ "$DMZ_IFACE" != "" ] ; then
if [ -e /proc/sys/net/ipv4/conf/$DMZ_IFACE/accept_source_route ] ; then
if [ "$ACCEPT_SOURCE_ROUTE" = "TRUE" ] ; then
echo "1" > /proc/sys/net/ipv4/conf/$DMZ_IFACE/accept_source_route
echo -n "disabled:${DMZ_IFACE} "
else
echo "0" > /proc/sys/net/ipv4/conf/$DMZ_IFACE/accept_source_route
echo -n "activated:${DMZ_IFACE} "
fi
else
echo "not found:${DMZ_IFACE} "
fi
fi
echo
# ===============================================
# --------Alteração -----------------------------
# ===============================================
# ===============================================
# --------Actual NetFilter Stuff Follows---------
# ===============================================
# Flush everything
# If you need compatability, you can comment some or all of these out,
# but remember, if you re-run it, it'll just add the new rules in, it
# won't remove the old ones for you then, this is how it removes them.
echo -n "Flush: "
${IPTABLES} -t filter -F INPUT
echo -n "INPUT "
${IPTABLES} -t filter -F OUTPUT
echo -n "OUTPUT1 "
${IPTABLES} -t filter -F FORWARD
echo -n "FORWARD "
${IPTABLES} -t nat -F PREROUTING
echo -n "PREROUTING1 "
${IPTABLES} -t nat -F OUTPUT
echo -n "OUTPUT2 "
${IPTABLES} -t nat -F POSTROUTING
echo -n "POSTROUTING "
${IPTABLES} -t mangle -F PREROUTING
echo -n "PREROUTING2 "
${IPTABLES} -t mangle -F OUTPUT
echo -n "OUTPUT3"
echo
# Create new chains
# Output to /dev/null in case they don't exist from a previous invocation
echo -n "Creating chains: "
for chain in ${FILTER_CHAINS} ; do
${IPTABLES} -t filter -F ${chain} > /dev/null 2>&1
${IPTABLES} -t filter -X ${chain} > /dev/null 2>&1
${IPTABLES} -t filter -N ${chain}
echo -n "${chain} "
done
if [ ${HAVE_ULOG} = "true" ] || [ ${HAVE_ULOG} = "" ] ; then
for chain in ${UL_FILTER_CHAINS} ; do
${IPTABLES} -t filter -F ${chain} > /dev/null 2>&1
${IPTABLES} -t filter -X ${chain} > /dev/null 2>&1
${IPTABLES} -t filter -N ${chain}
echo -n "${chain} "
done
fi
echo
# Default Policies
# INPUT policy is drop as of 2.3.7-pre5
# Policy can't be reject because of kernel limitations
echo -n "Default Policies: "
${IPTABLES} -t filter -P INPUT ACCEPT
echo -n "INPUT:ACCEPT "
${IPTABLES} -t filter -P OUTPUT ACCEPT
echo -n "OUTPUT:ACCEPT "
${IPTABLES} -t filter -P FORWARD DROP
echo -n "FORWARD:DROP "
${IPTABLES} -t filter -P PREROUTING ACCEPT
echo
# ===============================================
# -------Chain setup before jumping to them------
# ===============================================
#These logging chains are valid to specify in DROP= above
#Set up LDROP
echo -n "Setting up drop chains chains: "
${IPTABLES} -t filter -A LDROP -p tcp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "TCP Dropped "
${IPTABLES} -t filter -A LDROP -p udp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "UDP Dropped "
${IPTABLES} -t filter -A LDROP -p icmp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "ICMP Dropped "
${IPTABLES} -t filter -A LDROP -f -m limit --limit ${LOG_FLOOD} -j LOG --log-level 4 --log-prefix "FRAGMENT Dropped "
${IPTABLES} -t filter -A LDROP -j DROP
echo -n "LDROP "
#And LREJECT too
${IPTABLES} -t filter -A LREJECT -p tcp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "TCP Rejected "
${IPTABLES} -t filter -A LREJECT -p udp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "UDP Rejected "
${IPTABLES} -t filter -A LREJECT -p icmp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "ICMP Rejected "
${IPTABLES} -t filter -A LREJECT -f -m limit --limit ${LOG_FLOOD} -j LOG --log-level 4 --log-prefix "FRAGMENT Rejected "
${IPTABLES} -t filter -A LREJECT -j REJECT
echo -n "LREJECT "
#Don't forget TREJECT
${IPTABLES} -t filter -A TREJECT -p tcp -j REJECT --reject-with tcp-reset
${IPTABLES} -t filter -A TREJECT -p udp -j REJECT --reject-with icmp-port-unreachable
${IPTABLES} -t filter -A TREJECT -p icmp -j DROP
${IPTABLES} -t filter -A TREJECT -j REJECT
echo -n "TREJECT "
#And LTREJECT
${IPTABLES} -t filter -A LTREJECT -p tcp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "TCP Rejected "
${IPTABLES} -t filter -A LTREJECT -p udp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "UDP Rejected "
${IPTABLES} -t filter -A LTREJECT -p icmp -m limit --limit ${LOG_FLOOD} -j LOG --log-level 6 --log-prefix "ICMP Rejected "
${IPTABLES} -t filter -A LTREJECT -f -m limit --limit ${LOG_FLOOD} -j LOG --log-level 4 --log-prefix "FRAGMENT Rejected "
${IPTABLES} -t filter -A LTREJECT -j TREJECT
echo -n "LTREJECT "
#And ULOG stuff, same as above but ULOG instead of LOG
if [ ${HAVE_ULOG} = "true" ] || [ ${HAVE_ULOG} = "" ] ; then
${IPTABLES} -t filter -A ULDROP -p tcp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LDROP_TCP
${IPTABLES} -t filter -A ULDROP -p udp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LDROP_UDP
${IPTABLES} -t filter -A ULDROP -p icmp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LDROP_ICMP
${IPTABLES} -t filter -A ULDROP -f -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LDROP_FRAG
${IPTABLES} -t filter -A ULDROP -j DROP
echo -n "ULDROP "
${IPTABLES} -t filter -A ULREJECT -p tcp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LREJECT_TCP
${IPTABLES} -t filter -A ULREJECT -p udp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LREJECT_UDP
${IPTABLES} -t filter -A ULREJECT -p icmp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LREJECT_UDP
${IPTABLES} -t filter -A ULREJECT -f -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LREJECT_FRAG
${IPTABLES} -t filter -A ULREJECT -j REJECT
echo -n "ULREJECT "
${IPTABLES} -t filter -A ULTREJECT -p tcp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LTREJECT_TCP
${IPTABLES} -t filter -A ULTREJECT -p udp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LTREJECT_UDP
${IPTABLES} -t filter -A ULTREJECT -p icmp -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LTREJECT_ICMP
${IPTABLES} -t filter -A ULTREJECT -f -m limit --limit ${LOG_FLOOD} -j ULOG --ulog-nlgroup 1 --ulog-prefix LTREJECT_FRAG
${IPTABLES} -t filter -A ULTREJECT -p tcp -j REJECT --reject-with tcp-reset
${IPTABLES} -t filter -A ULTREJECT -p udp -j REJECT --reject-with icmp-port-unreachable
${IPTABLES} -t filter -A ULTREJECT -p icmp -j DROP
${IPTABLES} -t filter -A ULTREJECT -j REJECT
echo -n "ULTREJECT "
fi
#newline
echo
# Set up the per-proto ACCEPT chains
echo -n "Setting up per-proto ACCEPT: "
# TCPACCEPT
# SYN Flood "Protection"
${IPTABLES} -t filter -A TCPACCEPT -p tcp --syn -m limit --limit ${SYN_FLOOD} -j ACCEPT
${IPTABLES} -t filter -A TCPACCEPT -p tcp --syn -m limit --limit ${LOG_FLOOD} -j LOG --log-prefix "Possible SynFlood "
${IPTABLES} -t filter -A TCPACCEPT -p tcp --syn -j ${DROP}
${IPTABLES} -t filter -A TCPACCEPT -p tcp ! --syn -j ACCEPT
# Log anything that hasn't matched yet and ${DROP} it since it isn't TCP and shouldn't be here
${IPTABLES} -t filter -A TCPACCEPT -m limit --limit ${LOG_FLOOD} -j LOG --log-prefix "Mismatch in TCPACCEPT "
${IPTABLES} -t filter -A TCPACCEPT -j ${DROP}
echo -n "TCPACCEPT "
#UDPACCEPT
${IPTABLES} -t filter -A UDPACCEPT -p udp -j ACCEPT
# Log anything not UDP and ${DROP} it since it's not supposed to be here
${IPTABLES} -t filter -A UDPACCEPT -m limit --limit ${LOG_FLOOD} -j LOG --log-prefix "Mismatch on UDPACCEPT "
${IPTABLES} -t filter -A UDPACCEPT -j ${DROP}
echo -n "UDPACCEPT "
#Done
echo
# =================================================
# -------------------Exemptions--------------------
# =================================================
if [ "$SUPER_EXEMPT" != "" ] ; then
echo -n "Super Exemptions: "
for host in ${SUPER_EXEMPT} ; do
${IPTABLES} -t filter -A INPUT -s ${host} -j ACCEPT
${IPTABLES} -t filter -A OUTPUT -d ${host} -j ACCEPT
${IPTABLES} -t filter -A FORWARD -s ${host} -j ACCEPT
${IPTABLES} -t filter -A FORWARD -d ${host} -j ACCEPT
echo -n "${host} "
done
echo
fi
# =================================================
# ----------------Explicit Denies------------------
# =================================================
#Blackholes will not be overridden by hostwise allows
if [ "$BLACKHOLE" != "" ] ; then
echo -n "Blackholes: "
for host in ${BLACKHOLE} ; do
${IPTABLES} -t filter -A INPUT -s ${host} -j ${BLACKHOLE_DROP}
${IPTABLES} -t filter -A OUTPUT -d ${host} -j ${BLACKHOLE_DROP}
${IPTABLES} -t filter -A FORWARD -s ${host} -j ${BLACKHOLE_DROP}
${IPTABLES} -t filter -A FORWARD -d ${host} -j ${BLACKHOLE_DROP}
echo -n "${host} "
done
echo
fi
if [ "$DENY_ALL" != "" ] ; then
echo -n "Denying hosts: "
for rule in ${DENY_ALL} ; do
echo "$rule" | {
IFS='<' read shost dhost
if [ "$dhost" == "" ] ; then
${IPTABLES} -t filter -A INPUT -s ${shost} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -s ${shost} -j ${DROP}
else
${IPTABLES} -t filter -A INPUT -s ${shost} -d ${dhost} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -s ${shost} -d ${dhost} -j ${DROP}
fi
}
echo -n "${rule} "
done
echo
fi
if [ "$DENY_HOSTWISE_TCP" != "" ] ; then
echo -n "Hostwise TCP Denies: "
for rule in ${DENY_HOSTWISE_TCP} ; do
echo "$rule" | {
IFS='><' read shost port dhost
echo "$port" | {
IFS='-' read fsp lsp
if [ "$dhost" == "" ] ; then
if [ "$lsp" != "" ] ; then
${IPTABLES} -t filter -A INPUT -p tcp -s ${shost} --dport ${fsp}:${lsp} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -p tcp -s ${shost} --dport ${fsp}:${lsp} -j ${DROP}
else
${IPTABLES} -t filter -A INPUT -p tcp -s ${shost} --dport ${port} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -p tcp -s ${shost} --dport ${port} -j ${DROP}
fi
else
if [ "$lsp" != "" ] ; then
${IPTABLES} -t filter -A INPUT -p tcp -s ${shost} -d ${dhost} --dport ${fsp}:${lsp} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -p tcp -s ${shost} -d ${dhost} --dport ${fsp}:${lsp} -j ${DROP}
else
${IPTABLES} -t filter -A INPUT -p tcp -s ${shost} -d ${dhost} --dport ${port} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -p tcp -s ${shost} -d ${dhost} --dport ${port} -j ${DROP}
fi
fi
echo -n "${rule} "
}
}
done
echo
fi
if [ "$DENY_HOSTWISE_UDP" != "" ] ; then
echo -n "Hostwise UDP Denies: "
for rule in ${DENY_HOSTWISE_UDP} ; do
echo "$rule" | {
IFS='><' read shost port dhost
echo "$port" | {
IFS='-' read fsp lsp
if [ "$dhost" == "" ] ; then
if [ "$lsp" != "" ] ; then
${IPTABLES} -t filter -A INPUT -p udp -s ${shost} --dport ${fsp}:${lsp} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -p udp -s ${shost} --dport ${fsp}:${lsp} -j ${DROP}
else
${IPTABLES} -t filter -A INPUT -p udp -s ${shost} --dport ${port} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -p udp -s ${shost} --dport ${port} -j ${DROP}
fi
else
if [ "$lsp" != "" ] ; then
${IPTABLES} -t filter -A INPUT -p udp -s ${shost} -d ${dhost} --dport ${fsp}:${lsp} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -p udp -s ${shost} -d ${dhost} --dport ${fsp}:${lsp} -j ${DROP}
else
${IPTABLES} -t filter -A INPUT -p udp -s ${shost} -d ${dhost} --dport ${port} -j ${DROP}
${IPTABLES} -t filter -A FORWARD -p udp -s ${shost} -d ${dhost} --dport ${port} -j ${DROP}
fi
fi
echo -n "${rule} "
}
}
done
echo
fi
#Invalid packets are always annoying
echo -n "${DROP}ing invalid packets..."
${IPTABLES} -t filter -A INETIN -m state --state INVALID -j ${DROP}
echo "done"
# ------------------------------------------------------------------------
# Internet jumps to INET chains and DMZ
# Set up INET chains
echo -n "Setting up INET chains: "
for inetdev in ${INET_IFACE} ; do
${IPTABLES} -t filter -A INPUT -i $inetdev -j INETIN
for landev in ${LAN_IFACE} ; do
${IPTABLES} -t filter -A FORWARD -i $inetdev -o $landev -j INETIN
done
echo -n "INETIN "
${IPTABLES} -t filter -A OUTPUT -o $inetdev -j INETOUT
for landev in ${LAN_IFACE} ; do
${IPTABLES} -t filter -A FORWARD -o $inetdev -i $landev -j INETOUT
done
echo -n "INETOUT "
echo
done
if [ "$BRAINDEAD_ISP" = "TRUE" ] ; then
${IPTABLES} -t filter -A INETOUT -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
fi
# For now we'll subject the DMZ to the same rules as the internet when going onto the trusted LAN
# And we'll let it go anywhere on the internet
if [ "$DMZ_IFACE" != "" ] ; then
echo -n "Setting up DMZ Chains: "
${IPTABLES} -A OUTPUT -o ${DMZ_IFACE} -j DMZOUT
${IPTABLES} -A FORWARD -i ${LAN_IFACE} -o ${DMZ_IFACE} -j DMZOUT
${IPTABLES} -A FORWARD -i ${INET_IFACE} -o ${DMZ_IFACE} -j ACCEPT
echo -n "DMZOUT "
echo -n "DMZ for Internet Forwarding to INETOUT..."
${IPTABLES} -A DMZOUT -j INETOUT
${IPTABLES} -A INPUT -i ${DMZ_IFACE} -j DMZIN
echo -n "DMZIN "
echo
echo -n "DMZ for LAN and localhost Forwarding to INETIN..."
${IPTABLES} -A FORWARD -i ${DMZ_IFACE} -o ${LAN_IFACE} -j DMZOUT
${IPTABLES} -A FORWARD -i ${DMZ_IFACE} -o ${INET_IFACE} -j ACCEPT
${IPTABLES} -A DMZOUT -o ${LAN_IFACE} -j INETIN
echo "done"
echo -n "done"
fi
# ------------------------------------------------------------------------
# Local traffic to internet or crossing subnets
# This should cover what we need if we don't use masquerading
# Unfortunately, MAC address matching isn't bidirectional (for
# obvious reasons), so IP based matching is done here
echo -n "Local Traffic Rules: "
if [ "$INTERNAL_LAN" != "" ] ; then
for subnet in ${INTERNAL_LAN} ; do
${IPTABLES} -t filter -A INPUT -s ${subnet} -j ACCEPT
${IPTABLES} -t filter -A FORWARD -s ${subnet} -o ! ${INET_IFACE} -i ! ${INET_IFACE} -j ACCEPT
echo -n "${subnet}:ACCEPT "
done
fi
# 127.0.0.0/8 used to need an entry in INTERNAL_LAN, but routing of that isn't needed
# so an allow is placed on INPUT so that the computer can talk to itself :)
${IPTABLES} -t filter -A INPUT -i ${LOOP_IFACE} -j ACCEPT
echo -n "loopback:ACCEPT "
# DHCP server magic
# Allow broadcasts from LAN to UDP port 67 (DHCP server)
if [ "$DHCP_SERVER" = "TRUE" ] ; then
for dev in ${LAN_IFACE} ; do
${IPTABLES} -t filter -A INPUT -i $dev -p udp --dport 67 -j ACCEPT
done
echo -n "dhcp:ACCEPT"
fi
echo #newline from local traffic rules
if [ "$PROXY" != "" ] ; then
echo -n "Setting up Transparent Proxy to ${PROXY}: "
for subnet in ${INTERNAL_LAN} ; do
echo "$PROXY" | {
IFS=':' read host port
if [ "$host" = "localhost" ] || [ "$host" = "127.0.0.1" ] ; then
${IPTABLES} -t nat -A PREROUTING -s ${subnet} -p tcp --dport 80 -j REDIRECT --to-port ${port}
echo -n "${subnet}:PROXY "
else
${IPTABLES} -t nat -A PREROUTING -s ! ${host} -p tcp --dport 80 -j DNAT --to-destination ${host}:${port}
${IPTABLES} -t nat -A POSTROUTING -s ${subnet} -d ${host} -j SNAT --to-source ${MY_IP} #Destination changed in PREROUTING
echo -n "${subnet}:PROXY "
fi
}
done
echo
fi
if [ "$ALLOW_OUT_TCP" != "" ] ; then
echo -n "Internet censorship TCP allows: "
for rule in ${ALLOW_OUT_TCP} ; do
echo "$rule" | {
IFS=':' read intip destip dport
${IPTABLES} -t filter -A FORWARD -s ${intip} -d ${destip} -p tcp --dport ${dport} -o ${INET_IFACE} -j ACCEPT
echo -n "${intip}:${destip} "
}
done
echo
fi
# Set up basic NAT if the user wants it
if [ "$MASQ_LAN" != "" ] ; then
echo -n "Setting up masquerading: "
if [ "$MAC_MASQ" = "" ] ; then
for subnet in ${MASQ_LAN} ; do
${IPTABLES} -t nat -A POSTROUTING -s ${subnet} -o ${INET_IFACE} -j MASQUERADE
echo -n "${subnet}:MASQUERADE "
done
else
for address in ${MAC_MASQ} ; do
${IPTABLES} -t nat -A POSTROUTING -m mac --mac-source ${address} -o ${INET_IFACE} -j MASQUERADE
echo -n "${address}:MASQUERADE "
done
fi
echo
fi
if [ "$SNAT_LAN" != "" ] ; then #Static NAT used
echo -n "Setting up static NAT: "
if [ "$MAC_SNAT" = "" ] ; then
for rule in ${SNAT_LAN} ; do
echo "$rule" | {
IFS=':' read host destip
${IPTABLES} -t nat -A POSTROUTING -s ${host} -o ${INET_IFACE} -j SNAT --to-source ${destip}
echo -n "${host}:SNAT "
}
done
else
for rule in ${MAC_SNAT} ; do
echo "$rule" | {
IFS=':' read address destip
${IPTABLES} -t nat -A POSTROUTING -m mac --mac-source ${address} -o ${INET_IFACE} -j SNAT --to-source ${destip}
echo -n "${address}:SNAT "
}
done
fi
echo
fi
#TCP Port-Forwards
if [ "$TCP_FW" != "" ] ; then
echo -n "TCP Port Forwards: "
for rule in ${TCP_FW} ; do
echo "$rule" | {
IFS=':><' read srcport destport host shost
echo "$srcport" | {
IFS='-' read fsp lsp
if [ "$shost" = "" ] ; then
if [ "$lsp" != "" ] ; then
echo "$destport" | {
IFS='-' read fdp ldp
${IPTABLES} -t nat -A PREROUTING -i ${INET_IFACE} -p tcp --dport ${fsp}:${lsp} -j DNAT --to-destination ${host}:${destport}
}
else
${IPTABLES} -t nat -A PREROUTING -i ${INET_IFACE} -p tcp --dport ${srcport} -j DNAT --to-destination ${host}:${destport}
fi
else
if [ "$lsp" != "" ] ; then
echo "$destport" | {
IFS='-' read fdp ldp
${IPTABLES} -t nat -A PREROUTING -p tcp -d ${shost} --dport ${fsp}:${lsp} -j DNAT --to-destination ${host}:${destport}
}
else
${IPTABLES} -t nat -A PREROUTING -p tcp -d ${shost} --dport ${srcport} -j DNAT --to-destination ${host}:${destport}
fi
fi
echo -n "${rule} "
}
}
done
echo
fi
#UDP Port Forwards
if [ "$UDP_FW" != "" ] ; then
echo -n "UDP Port Forwards: "
for rule in ${UDP_FW} ; do
echo "$rule" | {
IFS=':><' read srcport destport host shost
echo "$srcport" | {
IFS='-' read fsp lsp
if [ "$shost" = "" ] ; then
if [ "$lsp" != "" ] ; then
echo "$destport" | {
IFS='-' read fdp ldp
${IPTABLES} -t nat -A PREROUTING -i ${INET_IFACE} -p udp --dport ${fsp}:${lsp} -j DNAT --to-destination ${host}:${destport}
}
else
${IPTABLES} -t nat -A PREROUTING -i ${INET_IFACE} -p udp --dport ${srcport} -j DNAT --to-destination ${host}:${destport}
fi
else
if [ "$lsp" != "" ] ; then
echo "$destport" | {
IFS='-' read fdp ldp
${IPTABLES} -t nat -A PREROUTING -p udp -d ${shost} --dport ${fsp}:${lsp} -j DNAT --to-destination ${host}:${destport}
}
else
${IPTABLES} -t nat -A PREROUTING -p udp -d ${shost} --dport ${srcport} -j DNAT --to-destination ${host}:${destport}
fi
fi
echo -n "${rule} "
}
}
done
echo
fi
# =================================================
# -------------------ICMP rules--------------------
# =================================================
if [ "$BAD_ICMP" != "" ] ; then
echo -n "${DROP}ing ICMP messages specified in BAD_ICMP..."
for message in ${BAD_ICMP} ; do
${IPTABLES} -t filter -A INETIN -p icmp --icmp-type ${message} -j ${DROP}
echo -n "${message} "
done
echo
fi
# Flood "security"
# You'll still respond to these if they comply with the limits (set in config)
# There is a more elegant way to set this using sysctl, however this has the
# advantage that the kernel ICMP stack never has to process it, lessening
# the chance of a very serious flood overloading your kernel.
# This is just a packet limit, you still get the packets on the interface and
# still may experience lag if the flood is heavy enough
echo -n "Flood limiting: "
# Ping Floods (ICMP echo-request)
${IPTABLES} -t filter -A INETIN -p icmp --icmp-type echo-request -m limit --limit ${PING_FLOOD} -j ACCEPT
${IPTABLES} -t filter -A INETIN -p icmp --icmp-type echo-request -j ${DROP}
echo -n "ICMP-PING "
echo
echo -n "Allowing the rest of the ICMP messages in..."
${IPTABLES} -t filter -A INETIN -p icmp --icmp-type ! echo-request -j ACCEPT
echo "done"
# ================================================================
# ------------Allow stuff we have chosen to allow in--------------
# ================================================================
# Hostwise allows
if [ "$ALLOW_HOSTWISE_TCP" != "" ] ; then
echo -n "Hostwise TCP Allows: "
for rule in ${ALLOW_HOSTWISE_TCP} ; do
echo "$rule" | {
IFS='><' read shost port dhost
echo "$port" | {
IFS='-' read fsp lsp
if [ "$dhost" == "" ] ; then
if [ "$lsp" != "" ] ; then
${IPTABLES} -t filter -A INETIN -p tcp -s ${shost} --dport ${fsp}:${lsp} -j TCPACCEPT
else
${IPTABLES} -t filter -A INETIN -p tcp -s ${shost} --dport ${port} -j TCPACCEPT
fi
else
if [ "$lsp" != "" ] ; then
${IPTABLES} -t filter -A INETIN -p tcp -s ${shost} -d ${dhost} --dport ${fsp}:${lsp} -j TCPACCEPT
else
${IPTABLES} -t filter -A INETIN -p tcp -s ${shost} -d ${dhost} --dport ${port} -j TCPACCEPT
fi
fi
echo -n "${rule} "
}
}
done
echo
fi
if [ "$ALLOW_HOSTWISE_UDP" != "" ] ; then
echo -n "Hostwise UDP Allows: "
for rule in ${ALLOW_HOSTWISE_UDP} ; do
echo "$rule" | {
IFS='><' read shost port dhost
echo "$port" | {
IFS='-' read fsp lsp
if [ "$dhost" == "" ] ; then
if [ "$lsp" != "" ] ; then
${IPTABLES} -t filter -A INETIN -p udp -s ${shost} --dport ${fsp}:${lsp} -j UDPACCEPT
else
${IPTABLES} -t filter -A INETIN -p udp -s ${shost} --dport ${port} -j UDPACCEPT
fi
else
if [ "$lsp" != "" ] ; then
${IPTABLES} -t filter -A INETIN -p udp -s ${shost} -d ${dhost} --dport ${fsp}:${lsp} -j UDPACCEPT
else
${IPTABLES} -t filter -A INETIN -p udp -s ${shost} -d ${dhost} --dport ${port} -j UDPACCEPT
fi
fi
echo -n "${rule} "
}
}
done
echo
fi
if [ "$ALLOW_HOSTWISE_PROTO" != "" ] ; then
echo -n "Hostwise IP Protocol Allows: "
for rule in ${ALLOW_HOSTWISE_PROTO} ; do
echo "$rule" | {
IFS='><' read shost proto dhost
if [ "$dhost" == "" ] ; then
${IPTABLES} -t filter -A INETIN -p ${proto} -s ${shost} -j ACCEPT
else
${IPTABLES} -t filter -A INETIN -p ${proto} -s ${shost} -d ${dhost} -j ACCEPT
fi
echo -n "${rule} "
}
done
echo
fi
echo -n "Allowing established outbound connections back in..."
${IPTABLES} -t filter -A INETIN -m state --state ESTABLISHED -j ACCEPT
echo "done"
# RELATED on high ports only for security
echo -n "Allowing related inbound connections..."
${IPTABLES} -t filter -A INETIN -p tcp --dport 1024:65535 -m state --state RELATED -j TCPACCEPT
${IPTABLES} -t filter -A INETIN -p udp --dport 1024:65535 -m state --state RELATED -j UDPACCEPT
echo "done"
# =================================================
# ----------------Packet Mangling------------------
# =================================================
# TTL mangling
# This is probably just for the paranoid, but hey, isn't that what
# all security guys are? :)
if [ "$TTL_SAFE" != "" ] ; then
${IPTABLES} -t mangle -A PREROUTING -i ${INET_IFACE} -j TTL --ttl-set ${TTL_SAFE}
fi
# Type of Service mangle optimizations (the ACTIVE FTP one will only work for uploads)
# Most routers tend to ignore these, it's probably better to use
# QoS. A packet scheduler like HTB is much more efficient
# at assuring bandwidth availability at the local end than
# ToS is.
if [ "$MANGLE_TOS_OPTIMIZE" = "TRUE" ] ; then
echo -n "Optimizing traffic: "
${IPTABLES} -t mangle -A OUTPUT -p tcp --dport 23 -j TOS --set-tos Minimize-Delay
echo -n "telnet "
${IPTABLES} -t mangle -A OUTPUT -p tcp --dport 22 -j TOS --set-tos Minimize-Delay
echo -n "ssh "
${IPTABLES} -t mangle -A OUTPUT -p tcp --dport 20 -j TOS --set-tos Minimize-Cost
echo -n "ftp-data "
${IPTABLES} -t mangle -A OUTPUT -p tcp --dport 21 -j TOS --set-tos Minimize-Delay
echo -n "ftp-control "
${IPTABLES} -t mangle -A OUTPUT -p udp --dport 4000:7000 -j TOS --set-tos Minimize-Delay
echo -n "diablo2 "
echo
fi
# What to do on those INET chains when we hit the end
echo -n "Setting up INET policies: "
# Drop if we cant find a valid inbound rule.
${IPTABLES} -t filter -A INETIN -j ${DROP}
echo -n "INETIN:${DROP} "
# We can send what we want to the internet
${IPTABLES} -t filter -A INETOUT -j ACCEPT
echo -n "INETOUT:ACCEPT "
echo
# All done!
echo "Done loading the firewall!"
Patrocínio
Site hospedado pelo provedor RedeHost.
Destaques
Artigos
Compartilhando a tela do Computador no Celular via Deskreen
Como Configurar um Túnel SSH Reverso para Acessar Sua Máquina Local a Partir de uma Máquina Remota
Configuração para desligamento automatizado de Computadores em um Ambiente Comercial
Dicas
Como renomear arquivos de letras maiúsculas para minúsculas
Imprimindo no formato livreto no Linux
Vim - incrementando números em substituição
Efeito "livro" em arquivos PDF
Como resolver o erro no CUPS: Unable to get list of printer drivers
Tópicos
Não to conseguindo resolver este problemas ao instalar o playonelinux (1)
Excluir banco de dados no xampp (1)
Top 10 do mês
-
Xerxes
1° lugar - 65.531 pts -
Fábio Berbert de Paula
2° lugar - 50.670 pts -
Buckminster
3° lugar - 17.384 pts -
Mauricio Ferrari
4° lugar - 15.358 pts -
Alberto Federman Neto.
5° lugar - 14.114 pts -
Diego Mendes Rodrigues
6° lugar - 13.410 pts -
Daniel Lara Souza
7° lugar - 12.763 pts -
edps
8° lugar - 10.797 pts -
Alessandro de Oliveira Faria (A.K.A. CABELO)
9° lugar - 10.621 pts -
Andre (pinduvoz)
10° lugar - 10.475 pts
Scripts
[Python] Automação de scan de vulnerabilidades
[Python] Script para analise de superficie de ataque
[Shell Script] Novo script para redimensionar, rotacionar, converter e espelhar arquivos de imagem
[Shell Script] Iniciador de DOOM (DSDA-DOOM, Doom Retro ou Woof!)
[Shell Script] Script para adicionar bordas às imagens de uma pasta
A maior comunidade GNU/Linux da América Latina! Artigos, dicas, tutoriais, fórum, scripts e muito mais. Ideal para quem busca auto-ajuda.
Site hospedado por:
