Teste do meu HD com Gsmartcontrol

lgfcosta
(usa Linux Mint)

Enviado em 23/08/2020 - 16:14h

Caros, boa tarde.

Resolvi realizar testes no meu HD pelo gsmartcontrol e 4 erros foram listados. Fiquei confuso com a análise, alguém pode me ajudar a desvendar se preciso me preocupar?
Desde já agradeço.

Linux mint 20 xfce.

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)

Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org



=== START OF INFORMATION SECTION ===

Model Family:     Western Digital Scorpio Blue Serial ATA

Device Model:     WDC WD3200BEVT-22ZCT0

Serial Number:    WD-WXK1A2040555

LU WWN Device Id: 5 0014ee 2aef0bc12

Firmware Version: 11.01A11

User Capacity:    320,072,933,376 bytes [320 GB]

Sector Size:      512 bytes logical/physical

Rotation Rate:    5400 rpm

Device is:        In smartctl database [for details use: -P show]

ATA Version is:   ATA8-ACS (minor revision not indicated)

SATA Version is:  SATA 2.5, 3.0 Gb/s

Local Time is:    Sun Aug 23 18:13:58 2020 UTC

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

AAM feature is:   Disabled

APM level is:     254 (maximum performance)

Rd look-ahead is: Enabled

Write cache is:   Enabled

DSN feature is:   Unavailable

ATA Security is:  Disabled, frozen [SEC2]



=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED



General SMART Values:

Offline data collection status:  (0x00)	Offline data collection activity

					was never started.

					Auto Offline Data Collection: Disabled.

Self-test execution status:      (   0)	The previous self-test routine completed

					without error or no self-test has ever 

					been run.

Total time to complete Offline 

data collection: 		( 9600) seconds.

Offline data collection

capabilities: 			 (0x7b) SMART execute Offline immediate.

					Auto Offline data collection on/off support.

					Suspend Offline collection upon new

					command.

					Offline surface scan supported.

					Self-test supported.

					Conveyance Self-test supported.

					Selective Self-test supported.

SMART capabilities:            (0x0003)	Saves SMART data before entering

					power-saving mode.

					Supports SMART auto save timer.

Error logging capability:        (0x01)	Error logging supported.

					General Purpose Logging supported.

Short self-test routine 

recommended polling time: 	 (   2) minutes.

Extended self-test routine

recommended polling time: 	 ( 113) minutes.

Conveyance self-test routine

recommended polling time: 	 (   5) minutes.

SCT capabilities: 	       (0x303f)	SCT Status supported.

					SCT Error Recovery Control supported.

					SCT Feature Control supported.

					SCT Data Table supported.



SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE

  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    2

  3 Spin_Up_Time            POS--K   189   187   021    -    1550

  4 Start_Stop_Count        -O--CK   095   095   000    -    5387

  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0

  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0

  9 Power_On_Hours          -O--CK   081   081   000    -    14168

 10 Spin_Retry_Count        PO--CK   100   100   051    -    0

 11 Calibration_Retry_Count -O--CK   100   100   000    -    0

 12 Power_Cycle_Count       -O--CK   095   095   000    -    5297

192 Power-Off_Retract_Count -O--CK   200   200   000    -    172

193 Load_Cycle_Count        -O--CK   180   180   000    -    62503

194 Temperature_Celsius     -O---K   106   091   000    -    41

196 Reallocated_Event_Count -O--CK   200   200   000    -    0

197 Current_Pending_Sector  -O--CK   200   200   000    -    0

198 Offline_Uncorrectable   ----CK   100   253   000    -    0

199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0

200 Multi_Zone_Error_Rate   P--R--   200   200   051    -    0

                            ||||||_ K auto-keep

                            |||||__ C event count

                            ||||___ R error rate

                            |||____ S speed/performance

                            ||_____ O updated online

                            |______ P prefailure warning



General Purpose Log Directory Version 1

SMART           Log Directory Version 1 [multi-sector log support]

Address    Access  R/W   Size  Description

0x00       GPL,SL  R/O      1  Log Directory

0x01           SL  R/O      1  Summary SMART error log

0x02           SL  R/O      5  Comprehensive SMART error log

0x03       GPL     R/O      6  Ext. Comprehensive SMART error log

0x06           SL  R/O      1  SMART self-test log

0x07       GPL     R/O      1  Extended self-test log

0x09           SL  R/W      1  Selective self-test log

0x10       GPL     R/O      1  NCQ Command Error log

0x11       GPL     R/O      1  SATA Phy Event Counters log

0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log

0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log

0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log

0xc0       GPL,SL  VS       1  Device vendor specific log

0xc1       GPL     VS      24  Device vendor specific log

0xe0       GPL,SL  R/W      1  SCT Command/Status

0xe1       GPL,SL  R/W      1  SCT Data Transfer



SMART Extended Comprehensive Error Log Version: 1 (6 sectors)

Device Error Count: 4

	CR     = Command Register

	FEATR  = Features Register

	COUNT  = Count (was: Sector Count) Register

	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8

	LH     = LBA High (was: Cylinder High) Register    ]   LBA

	LM     = LBA Mid (was: Cylinder Low) Register      ] Register

	LL     = LBA Low (was: Sector Number) Register     ]

	DV     = Device (was: Device/Head) Register

	DC     = Device Control Register

	ER     = Error register

	ST     = Status register

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.



Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)

  When the command that caused the error occurred, the device was in an unknown state.



  After command completion occurred, registers were:

  ER -- ST COUNT  LBA_48  LH LM LL DV DC

  -- -- -- == -- == == == -- -- -- -- --

  40 -- 00 01 08 00 51 00 00 e0 01 00 00



  Commands leading to the command that caused the error were:

  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name

  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

  00 51 25 a6 0e 00 00 00 00 00 01 00 09     00:00:00.000  NOP [Reserved subcommand] [OBS-ACS-2]

  00 08 00 00 c0 a6 51 09 0e 25 00 01 00     00:00:51.208  NOP [Abort queued commands]

  09 50 25 a6 0e 00 08 00 b8 00 01 00 09     07:40:59.856  [RESERVED]

  00 08 00 00 a8 a6 50 09 0e 25 00 01 00     00:00:45.064  NOP [Abort queued commands]



Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)

  When the command that caused the error occurred, the device was in an unknown state.



  After command completion occurred, registers were:

  ER -- ST COUNT  LBA_48  LH LM LL DV DC

  -- -- -- == -- == == == -- -- -- -- --

  40 -- 00 01 00 00 51 00 00 e0 01 00 00



  Commands leading to the command that caused the error were:

  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name

  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

  00 8a 25 a6 01 00 00 00 00 00 01 00 09     00:00:00.000  NOP [Reserved subcommand] [OBS-ACS-2]

  00 00 00 00 00 a6 7c 09 01 25 00 01 00     00:00:00.000  NOP [Abort queued commands]

  09 4a 35 a6 01 00 00 00 00 00 01 00 08     07:40:56.571  [RESERVED]

  00 60 00 00 a0 a6 49 01 01 35 00 01 00     00:00:24.608  NOP [Abort queued commands]



Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)

  When the command that caused the error occurred, the device was in an unknown state.



  After command completion occurred, registers were:

  ER -- ST COUNT  LBA_48  LH LM LL DV DC

  -- -- -- == -- == == == -- -- -- -- --

  01 -- 00 01 08 00 51 00 00 e0 01 00 00



  Commands leading to the command that caused the error were:

  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name

  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

  00 7c 25 02 b2 00 00 00 00 00 00 00 00     00:00:00.000  NOP [Reserved subcommand] [OBS-ACS-2]

  00 40 00 00 62 02 70 00 b2 25 00 00 00     00:00:38.920  NOP [Abort queued commands]

  00 65 25 02 b2 00 08 00 d8 00 00 00 00     00:02:56.741  NOP [Reserved subcommand] [OBS-ACS-2]

  00 08 00 00 40 02 58 00 b2 25 00 00 00     00:00:36.872  NOP [Abort queued commands]



Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)

  When the command that caused the error occurred, the device was in an unknown state.



  After command completion occurred, registers were:

  ER -- ST COUNT  LBA_48  LH LM LL DV DC

  -- -- -- == -- == == == -- -- -- -- --

  40 -- 00 01 00 00 51 00 00 e0 01 00 00



  Commands leading to the command that caused the error were:

  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name

  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

  00 6d 25 02 a5 00 00 00 00 00 00 00 00     00:00:00.000  NOP [Reserved subcommand] [OBS-ACS-2]

  00 08 00 00 d8 02 81 03 a4 25 00 00 00     00:00:00.000  NOP [Abort queued commands]

  01 74 35 02 a3 00 40 00 80 00 00 00 01     00:02:53.161  [RESERVED]

  00 08 00 00 a0 02 73 04 a3 35 00 00 00     00:00:22.536  NOP [Abort queued commands]



SMART Extended Self-test Log Version: 1 (1 sectors)

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error

# 1  Extended offline    Completed without error       00%     14168         -

# 2  Extended offline    Completed without error       00%     14059         -

# 3  Short offline       Completed without error       00%     14057         -



SMART Selective self-test log data structure revision number 1

 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.



SCT Status Version:                  2

SCT Version (vendor specific):       258 (0x0102)

Device State:                        Active (0)

Current Temperature:                    41 Celsius

Power Cycle Min/Max Temperature:     34/48 Celsius

Lifetime    Min/Max Temperature:     41/57 Celsius

Under/Over Temperature Limit Count:   0/0

Vendor specific:

01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00



SCT Temperature History Version:     2

Temperature Sampling Period:         1 minute

Temperature Logging Interval:        1 minute

Min/Max recommended Temperature:      0/60 Celsius

Min/Max Temperature Limit:            1/85 Celsius

Temperature History Size (Index):    128 (51)



Index    Estimated Time   Temperature Celsius

  52    2020-08-23 16:06    35  ****************

 ...    ..(  4 skipped).    ..  ****************

  57    2020-08-23 16:11    35  ****************

  58    2020-08-23 16:12    34  ***************

  59    2020-08-23 16:13    34  ***************

  60    2020-08-23 16:14    34  ***************

  61    2020-08-23 16:15    35  ****************

  62    2020-08-23 16:16    35  ****************

  63    2020-08-23 16:17    35  ****************

  64    2020-08-23 16:18    36  *****************

  65    2020-08-23 16:19    37  ******************

  66    2020-08-23 16:20    38  *******************

  67    2020-08-23 16:21    39  ********************

  68    2020-08-23 16:22    40  *********************

  69    2020-08-23 16:23    41  **********************

  70    2020-08-23 16:24    41  **********************

  71    2020-08-23 16:25    42  ***********************

  72    2020-08-23 16:26    42  ***********************

  73    2020-08-23 16:27    43  ************************

  74    2020-08-23 16:28    43  ************************

  75    2020-08-23 16:29    44  *************************

  76    2020-08-23 16:30    44  *************************

  77    2020-08-23 16:31    44  *************************

  78    2020-08-23 16:32    45  **************************

 ...    ..(  2 skipped).    ..  **************************

  81    2020-08-23 16:35    45  **************************

  82    2020-08-23 16:36    46  ***************************

 ...    ..(  2 skipped).    ..  ***************************

  85    2020-08-23 16:39    46  ***************************

  86    2020-08-23 16:40    47  ****************************

 ...    ..(  4 skipped).    ..  ****************************

  91    2020-08-23 16:45    47  ****************************

  92    2020-08-23 16:46    48  *****************************

 ...    ..( 22 skipped).    ..  *****************************

 115    2020-08-23 17:09    48  *****************************

 116    2020-08-23 17:10    47  ****************************

 ...    ..( 19 skipped).    ..  ****************************

   8    2020-08-23 17:30    47  ****************************

   9    2020-08-23 17:31    46  ***************************

 ...    ..( 25 skipped).    ..  ***************************

  35    2020-08-23 17:57    46  ***************************

  36    2020-08-23 17:58    45  **************************

  37    2020-08-23 17:59    45  **************************

  38    2020-08-23 18:00    45  **************************

  39    2020-08-23 18:01    44  *************************

  40    2020-08-23 18:02    44  *************************

  41    2020-08-23 18:03    44  *************************

  42    2020-08-23 18:04    43  ************************

  43    2020-08-23 18:05    43  ************************

  44    2020-08-23 18:06    42  ***********************

 ...    ..(  3 skipped).    ..  ***********************

  48    2020-08-23 18:10    42  ***********************

  49    2020-08-23 18:11    41  **********************

  50    2020-08-23 18:12    41  **********************

  51    2020-08-23 18:13    41  **********************



SCT Error Recovery Control:

           Read: Disabled

          Write: Disabled



Device Statistics (GP/SMART Log 0x04) not supported



SATA Phy Event Counters (GP Log 0x11)

ID      Size     Value  Description

0x0001  2            0  Command failed due to ICRC error

0x0002  2            0  R_ERR response for data FIS

0x0003  2            0  R_ERR response for device-to-host data FIS

0x0004  2            0  R_ERR response for host-to-device data FIS

0x0005  2            0  R_ERR response for non-data FIS

0x0006  2            0  R_ERR response for device-to-host non-data FIS

0x0007  2            0  R_ERR response for host-to-device non-data FIS

0x000a  2            2  Device-to-host register FISes sent due to a COMRESET

0x8000  4         8597  Vendor specific