Firmware failed to load

intsdvd
(usa Debian)

Enviado em 17/12/2016 - 09:45h

Olá pessoal!

Terminei de instalar o Debian e, no geral, tá rodando muito bem. A minha dúvida é acerca de algumas mensagens que aparecem antes da tela de login. Não sei se são problemas graves, mas se forem eu queria arrumar. Aparece o seguinte:

tpm_crb MST0101:000: can't request region for resource[men 0xfed
firmware: failed to load i195/skl_dmc_ver1_26.bin
usb 1-8: firmware: failed to load ar3k/AthrBT_0x11020100.dfu
Bluetooth: Loading patch file failed

O que eu posso fazer? Alguma sugestão?

rausilva
(usa Linux Mint)

Enviado em 17/12/2016 - 11:24h

Vc deve estar usando adaptador de bluetooth; poste a saída do comando: dmesg | grep Blue

intsdvd
(usa Debian)

Enviado em 17/12/2016 - 11:35h

rausilva o resultado foi:

root@debian:/home/bruno# dmesg | grep Blue

[    7.927575] Bluetooth: Core ver 2.21

[    7.927589] Bluetooth: HCI device and connection manager initialized

[    7.927592] Bluetooth: HCI socket layer initialized

[    7.927595] Bluetooth: L2CAP socket layer initialized

[    7.927603] Bluetooth: SCO socket layer initialized

[    8.389412] Bluetooth: HCI UART driver ver 2.3

[    8.389413] Bluetooth: HCI UART protocol H4 registered

[    8.389414] Bluetooth: HCI UART protocol BCSP registered

[    8.389414] Bluetooth: HCI UART protocol LL registered

[    8.389415] Bluetooth: HCI UART protocol ATH3K registered

[    8.389415] Bluetooth: HCI UART protocol Three-wire (H5) registered

[    8.389441] Bluetooth: HCI UART protocol Intel registered

[    8.389454] Bluetooth: HCI UART protocol BCM registered

[    8.389455] Bluetooth: HCI UART protocol QCA registered

[    8.406318] Bluetooth: Loading patch file failed

[    9.629299] Bluetooth: Loading patch file failed

[   29.775811] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   29.775812] Bluetooth: BNEP filters: protocol multicast

[   29.775815] Bluetooth: BNEP socket layer initialized

root@debian:/home/bruno# 

 

Mauriciodez
(usa Debian)

Enviado em 17/12/2016 - 11:49h

achei referencia a isso em note samsung e em mac ... vc se encaixa em alguns deles ???

___________________________________________________________________________________________
" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

intsdvd
(usa Debian)

Enviado em 17/12/2016 - 12:02h

Mauriciodez, na verdade é um Asus TP301UA-DW230T.

Pebis
(usa Debian)

Enviado em 17/12/2016 - 12:24h

Vê se com algum destes pacotes resolve

sudo apt install firmware-linux-nonfree firmware-linux-free firmware-linux

Pebis
(usa Debian)

Enviado em 17/12/2016 - 12:26h

Ah, e mais esse aqui

sudo apt install firmware-atheros

intsdvd
(usa Debian)

Enviado em 17/12/2016 - 12:43h

Pebis fiz o que você sugeriu. Agora só aparece:

/dev/sda7:clean, 335191/1831424 files, 2170670/7324160 blocks

7.337181 tpm_crb MSFT0101:00: can't request region forresources men 0xfed

 

Pebis
(usa Debian)

Enviado em 17/12/2016 - 13:24h

Procura nos logs do sistema, dmesg se consegue encontrar qual a falha aí tenta instalar os pacotes desse tpm e vê se resolve.

Consegue saber o que cada pacote faz com o comando apt show

por exemplo

root@debian:# apt show libtpm-unseal1
Package: libtpm-unseal1
Source: tpm-tools
Version: 1.3.8-1
Installed-Size: 101 kB
Maintainer: Pierre Chifflier <pollux@debian.org>
Depends: libc6 (>= 2.4), libtspi1 (>= 0.3.8)
Pre-Depends: multiarch-support
Homepage: http://trousers.sourceforge.net/
Tag: role::shared-lib
Section: libs
Priority: optional
Download-Size: 23,4 kB
APT-Sources: http://ftp.br.debian.org/debian/ jessie/main amd64 Packages
Description: Management tools for the TPM hardware (library)
tpm-tools is a group of tools to manage and utilize the Trusted Computing
Group's TPM hardware. TPM hardware can create, store and use RSA keys
securely (without ever being exposed in memory), verify a platform's
software state using cryptographic hashes and more.
.
This package contains the library.

intsdvd
(usa Debian)

Enviado em 17/12/2016 - 13:31h

Pebis, não entendi muito bem sua sugestão. Lancei o comando que você sugeriu, mas retornou muita informação. Inclusive, pelo que vi, fiquei com a sensação que tem mais coisa sem funcionar por aqui.

root@debian:/home/bruno# dmesg

[    0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22

[    0.000000] Linux version 4.8.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.11-1 (2016-12-02)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=9c40ea84-6985-4fa9-80aa-a4dbd979c726 ro quiet

[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'

[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256

[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64

[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64

[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.

[    0.000000] x86/fpu: Using 'eager' FPU context switches.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000082728fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000082729000-0x0000000082729fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x000000008272a000-0x0000000082753fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000082754000-0x00000000851bafff] usable

[    0.000000] BIOS-e820: [mem 0x00000000851bb000-0x0000000085e97fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000085e98000-0x0000000086538fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000086539000-0x00000000870a4fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000870a5000-0x0000000087f01fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000087f02000-0x0000000087f7efff] type 20

[    0.000000] BIOS-e820: [mem 0x0000000087f7f000-0x0000000087ffefff] usable

[    0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001f3ffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] efi: EFI v2.40 by American Megatrends

[    0.000000] efi:  ESRT=0x87e41e18  ACPI=0x8683f000  ACPI 2.0=0x8683f000  SMBIOS=0x8765b000  SMBIOS 3.0=0x8765a000 

[    0.000000] esrt: Reserving ESRT space from 0x0000000087e41e18 to 0x0000000087e41e50.

[    0.000000] SMBIOS 3.0.0 present.

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x1f4000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: write-back

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable

[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable

[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable

[    0.000000]   3 base 008C000000 mask 7FFC000000 uncachable

[    0.000000]   4 base 008A000000 mask 7FFE000000 uncachable

[    0.000000]   5 base 0089000000 mask 7FFF000000 uncachable

[    0.000000]   6 base 0088800000 mask 7FFF800000 uncachable

[    0.000000]   7 disabled

[    0.000000]   8 disabled

[    0.000000]   9 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  

[    0.000000] e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000

[    0.000000] Base memory trampoline at [ffffa08c00098000] 98000 size 24576

[    0.000000] Using GB pages for direct mapping

[    0.000000] BRK [0x6d94c000, 0x6d94cfff] PGTABLE

[    0.000000] BRK [0x6d94d000, 0x6d94dfff] PGTABLE

[    0.000000] BRK [0x6d94e000, 0x6d94efff] PGTABLE

[    0.000000] BRK [0x6d94f000, 0x6d94ffff] PGTABLE

[    0.000000] BRK [0x6d950000, 0x6d950fff] PGTABLE

[    0.000000] BRK [0x6d951000, 0x6d951fff] PGTABLE

[    0.000000] BRK [0x6d952000, 0x6d952fff] PGTABLE

[    0.000000] BRK [0x6d953000, 0x6d953fff] PGTABLE

[    0.000000] BRK [0x6d954000, 0x6d954fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x35cc1000-0x36e57fff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x000000008683F000 000024 (v02 _ASUS_)

[    0.000000] ACPI: XSDT 0x000000008683F0A0 0000C4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: FACP 0x00000000868650E0 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: DSDT 0x000000008683F1F8 025EE7 (v02 _ASUS_ Notebook 01072009 INTL 20120913)

[    0.000000] ACPI: FACS 0x00000000870A3F80 000040

[    0.000000] ACPI: APIC 0x00000000868651F0 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: FPDT 0x0000000086865278 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: FIDT 0x00000000868652C0 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: MCFG 0x0000000086865360 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)

[    0.000000] ACPI: HPET 0x00000000868653A0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)

[    0.000000] ACPI: SSDT 0x00000000868653D8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)

[    0.000000] ACPI: ECDT 0x00000000868656F0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)

[    0.000000] ACPI: LPIT 0x00000000868657B8 000094 (v01 INTEL  SKL-ULT  00000000 MSFT 0000005F)

[    0.000000] ACPI: SSDT 0x0000000086865850 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)

[    0.000000] ACPI: DBGP 0x0000000086865A98 000034 (v01 INTEL           00000000 MSFT 0000005F)

[    0.000000] ACPI: DBG2 0x0000000086865AD0 000054 (v00 INTEL           00000000 MSFT 0000005F)

[    0.000000] ACPI: SSDT 0x0000000086865B28 003F08 (v02 DptfTa DptfTabl 00001000 INTL 20120913)

[    0.000000] ACPI: SSDT 0x0000000086869A30 005843 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)

[    0.000000] ACPI: UEFI 0x000000008686F278 000042 (v01                 00000000      00000000)

[    0.000000] ACPI: SSDT 0x000000008686F2C0 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)

[    0.000000] ACPI: BGRT 0x0000000086870138 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: DMAR 0x0000000086870170 0000CC (v01 INTEL  SKL      00000001 INTL 00000001)

[    0.000000] ACPI: TPM2 0x0000000086870240 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)

[    0.000000] ACPI: MSDM 0x0000000085C59F18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001f3ffffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x1f3ff9000-0x1f3ffdfff]

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001f3ffffff]

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]

[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000082728fff]

[    0.000000]   node   0: [mem 0x0000000082754000-0x00000000851bafff]

[    0.000000]   node   0: [mem 0x0000000085e98000-0x0000000086538fff]

[    0.000000]   node   0: [mem 0x0000000087f7f000-0x0000000087ffefff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001f3ffffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001f3ffffff]

[    0.000000] On node 0 totalpages: 1546317

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 22 pages reserved

[    0.000000]   DMA zone: 3996 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 8483 pages used for memmap

[    0.000000]   DMA32 zone: 542897 pages, LIFO batch:31

[    0.000000]   Normal zone: 15616 pages used for memmap

[    0.000000]   Normal zone: 999424 pages, LIFO batch:31

[    0.000000] Reserving Intel graphics memory at 0x0000000089000000-0x000000008affffff

[    0.000000] ACPI: PM-Timer IO Port: 0x1808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x82729000-0x82729fff]

[    0.000000] PM: Registered nosave memory: [mem 0x8272a000-0x82753fff]

[    0.000000] PM: Registered nosave memory: [mem 0x851bb000-0x85e97fff]

[    0.000000] PM: Registered nosave memory: [mem 0x86539000-0x870a4fff]

[    0.000000] PM: Registered nosave memory: [mem 0x870a5000-0x87f01fff]

[    0.000000] PM: Registered nosave memory: [mem 0x87f02000-0x87f7efff]

[    0.000000] PM: Registered nosave memory: [mem 0x87fff000-0x87ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0x88000000-0x880fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8affffff]

[    0.000000] PM: Registered nosave memory: [mem 0x8b000000-0xdfffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]

[    0.000000] e820: [mem 0x8b000000-0xdfffffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1

[    0.000000] percpu: Embedded 35 pages/cpu @ffffa08df3c00000 s103384 r8192 d31784 u524288

[    0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 

[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1522132

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=9c40ea84-6985-4fa9-80aa-a4dbd979c726 ro quiet

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 5948612K/6185268K available (6097K kernel code, 1165K rwdata, 2828K rodata, 1372K init, 800K bss, 236656K reserved, 0K cma-reserved)

[    0.000000] Hierarchical RCU implementation.

[    0.000000] 	Build-time adjustment of leaf fanout to 64.

[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4

[    0.000000] NR_IRQS:33024 nr_irqs:1024 16

[    0.000000] spurious 8259A interrupt: IRQ7.

[    0.000000] Console: colour dummy device 80x25

[    0.000000] console [tty0] enabled

[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns

[    0.000000] hpet clockevent registered

[    0.000000] tsc: Detected 2400.000 MHz processor

[    0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000)

[    0.000025] pid_max: default: 32768 minimum: 301

[    0.000039] ACPI: Core revision 20160422

[    0.050859] ACPI: 6 ACPI AML tables successfully acquired and loaded



[    0.052068] Security Framework initialized

[    0.052069] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.052073] AppArmor: AppArmor disabled by boot time parameter

[    0.052456] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.053959] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.054631] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.054639] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.054879] CPU: Physical Processor ID: 0

[    0.054880] CPU: Processor Core ID: 0

[    0.054884] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[    0.054885] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[    0.054889] mce: CPU supports 8 MCE banks

[    0.054898] CPU0: Thermal monitoring enabled (TM1)

[    0.054914] process: using mwait in idle threads

[    0.054916] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8

[    0.054917] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4

[    0.055863] Freeing SMP alternatives memory: 24K (ffffffff9307c000 - ffffffff93082000)

[    0.059457] ftrace: allocating 24998 entries in 98 pages

[    0.069919] smpboot: APIC(0) Converting physical 0 to logical package 0

[    0.069920] smpboot: Max logical packages: 2

[    0.069923] DMAR: Host address width 39

[    0.069924] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

[    0.069935] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e

[    0.069936] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[    0.069939] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da

[    0.069940] DMAR: RMRR base: 0x00000085c39000 end: 0x00000085c58fff

[    0.069941] DMAR: RMRR base: 0x00000088800000 end: 0x0000008affffff

[    0.069942] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0

[    0.069944] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1

[    0.069945] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[    0.069945] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.

[    0.069946] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.

[    0.071361] DMAR-IR: Enabled IRQ remapping in xapic mode

[    0.071362] x2apic: IRQ remapping doesn't support X2APIC mode

[    0.075391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.115082] TSC deadline timer enabled

[    0.115086] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)

[    0.115090] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.

[    0.115125] ... version:                4

[    0.115125] ... bit width:              48

[    0.115126] ... generic registers:      4

[    0.115126] ... value mask:             0000ffffffffffff

[    0.115127] ... max period:             0000ffffffffffff

[    0.115127] ... fixed-purpose events:   3

[    0.115128] ... event mask:             000000070000000f

[    0.115664] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.115746] x86: Booting SMP configuration:

[    0.115747] .... node  #0, CPUs:      #1 #2 #3

[    0.357226] x86: Booted up 1 node, 4 CPUs

[    0.357228] smpboot: Total of 4 processors activated (19203.39 BogoMIPS)

[    0.361280] devtmpfs: initialized

[    0.361340] x86/mm: Memory block size: 128MB

[    0.363457] PM: Registering ACPI NVS region [mem 0x82729000-0x82729fff] (4096 bytes)

[    0.363458] PM: Registering ACPI NVS region [mem 0x86539000-0x870a4fff] (11976704 bytes)

[    0.363726] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.363760] pinctrl core: initialized pinctrl subsystem

[    0.363857] NET: Registered protocol family 16

[    0.373012] cpuidle: using governor ladder

[    0.389030] cpuidle: using governor menu

[    0.389158] ACPI: bus type PCI registered

[    0.389159] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.389223] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.389226] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[    0.389237] PCI: Using configuration type 1 for base access

[    0.405243] HugeTLB registered 1 GB page size, pre-allocated 0 pages

[    0.405244] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    0.405436] ACPI: Added _OSI(Module Device)

[    0.405436] ACPI: Added _OSI(Processor Device)

[    0.405437] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.405438] ACPI: Added _OSI(Processor Aggregator Device)

[    0.405440] ACPI : EC: EC description table is found, configuring boot EC

[    0.405440] ACPI : EC: EC started

[    0.408514] ACPI: Executed 21 blocks of module-level executable AML code

[    0.420574] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

[    0.426898] ACPI: Dynamic OEM Table Load:

[    0.426907] ACPI: SSDT 0xFFFFA08DEB8CF800 00061E (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)

[    0.427996] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked

[    0.429458] ACPI: Dynamic OEM Table Load:

[    0.429462] ACPI: SSDT 0xFFFFA08DEBF6D800 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)

[    0.431208] ACPI: Dynamic OEM Table Load:

[    0.431212] ACPI: SSDT 0xFFFFA08DEB8CF000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)

[    0.432559] ACPI: Dynamic OEM Table Load:

[    0.432563] ACPI: SSDT 0xFFFFA08DEBF64A00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)

[    0.435615] ACPI : EC: EC stopped

[    0.435779] ACPI : EC: EC started

[    0.435945] ACPI: Interpreter enabled

[    0.435990] ACPI: (supports S0 S3 S4 S5)

[    0.435991] ACPI: Using IOAPIC for interrupt routing

[    0.436031] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.439163] ACPI: Power Resource [WRST] (off)

[    0.439339] ACPI: Power Resource [WRST] (off)

[    0.439516] ACPI: Power Resource [WRST] (off)

[    0.439689] ACPI: Power Resource [WRST] (off)

[    0.439863] ACPI: Power Resource [WRST] (off)

[    0.440035] ACPI: Power Resource [WRST] (off)

[    0.440209] ACPI: Power Resource [WRST] (off)

[    0.440382] ACPI: Power Resource [WRST] (off)

[    0.440555] ACPI: Power Resource [WRST] (off)

[    0.440727] ACPI: Power Resource [WRST] (off)

[    0.440905] ACPI: Power Resource [WRST] (off)

[    0.441109] ACPI: Power Resource [WRST] (off)

[    0.441287] ACPI: Power Resource [WRST] (off)

[    0.441462] ACPI: Power Resource [WRST] (off)

[    0.441635] ACPI: Power Resource [WRST] (off)

[    0.441808] ACPI: Power Resource [WRST] (off)

[    0.441980] ACPI: Power Resource [WRST] (off)

[    0.442154] ACPI: Power Resource [WRST] (off)

[    0.442326] ACPI: Power Resource [WRST] (off)

[    0.442501] ACPI: Power Resource [WRST] (off)

[    0.451777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])

[    0.451782] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.453383] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]

[    0.453979] PCI host bridge to bus 0000:00

[    0.453981] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.453982] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.453983] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.453984] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]

[    0.453985] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]

[    0.453986] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]

[    0.453987] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]

[    0.453988] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]

[    0.453989] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]

[    0.453990] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]

[    0.453990] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]

[    0.453991] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]

[    0.453992] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]

[    0.453993] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]

[    0.453994] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]

[    0.453995] pci_bus 0000:00: root bus resource [mem 0x8b000000-0xdfffffff window]

[    0.453996] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]

[    0.453997] pci_bus 0000:00: root bus resource [bus 00-fe]

[    0.454004] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000

[    0.454123] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000

[    0.454132] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]

[    0.454138] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]

[    0.454142] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]

[    0.454275] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000

[    0.454286] pci 0000:00:04.0: reg 0x10: [mem 0xdf120000-0xdf127fff 64bit]

[    0.454495] pci 0000:00:13.0: [8086:9d35] type 00 class 0x000000

[    0.454516] pci 0000:00:13.0: reg 0x10: [mem 0xdf138000-0xdf138fff 64bit]

[    0.454708] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330

[    0.454728] pci 0000:00:14.0: reg 0x10: [mem 0xdf110000-0xdf11ffff 64bit]

[    0.454800] pci 0000:00:14.0: PME# supported from D3hot D3cold

[    0.454905] pci 0000:00:14.0: System wakeup disabled by ACPI

[    0.454944] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000

[    0.454962] pci 0000:00:14.2: reg 0x10: [mem 0xdf137000-0xdf137fff 64bit]

[    0.455213] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000

[    0.455421] pci 0000:00:15.0: reg 0x10: [mem 0xdf136000-0xdf136fff 64bit]

[    0.456326] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000

[    0.456348] pci 0000:00:16.0: reg 0x10: [mem 0xdf135000-0xdf135fff 64bit]

[    0.456427] pci 0000:00:16.0: PME# supported from D3hot

[    0.456573] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601

[    0.456588] pci 0000:00:17.0: reg 0x10: [mem 0xdf130000-0xdf131fff]

[    0.456596] pci 0000:00:17.0: reg 0x14: [mem 0xdf134000-0xdf1340ff]

[    0.456604] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]

[    0.456612] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]

[    0.456619] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]

[    0.456627] pci 0000:00:17.0: reg 0x24: [mem 0xdf133000-0xdf1337ff]

[    0.456672] pci 0000:00:17.0: PME# supported from D3hot

[    0.456819] pci 0000:00:1c.0: [8086:9d15] type 01 class 0x060400

[    0.456886] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.457079] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100

[    0.457317] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000

[    0.457330] pci 0000:00:1f.2: reg 0x10: [mem 0xdf12c000-0xdf12ffff]

[    0.457512] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300

[    0.457537] pci 0000:00:1f.3: reg 0x10: [mem 0xdf128000-0xdf12bfff 64bit]

[    0.457571] pci 0000:00:1f.3: reg 0x20: [mem 0xdf100000-0xdf10ffff 64bit]

[    0.457625] pci 0000:00:1f.3: PME# supported from D3hot D3cold

[    0.457801] pci 0000:00:1f.3: System wakeup disabled by ACPI

[    0.457841] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500

[    0.457888] pci 0000:00:1f.4: reg 0x10: [mem 0xdf132000-0xdf1320ff 64bit]

[    0.457959] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]

[    0.458226] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000

[    0.458251] pci 0000:01:00.0: reg 0x10: [mem 0xdf000000-0xdf07ffff 64bit]

[    0.458303] pci 0000:01:00.0: reg 0x30: [mem 0xdf080000-0xdf08ffff pref]

[    0.458375] pci 0000:01:00.0: supports D1 D2

[    0.458376] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.469319] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.469335] pci 0000:00:1c.0:   bridge window [mem 0xdf000000-0xdf0fffff]

[    0.471866] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.471918] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)

[    0.471969] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.472019] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.472068] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.472117] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.472166] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.472215] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.472779] ACPI: Enabled 6 GPEs in block 00 to 7F

[    0.472845] ACPI : EC: EC stopped

[    0.472969] ACPI : EC: GPE = 0x50, I/O: command/status = 0x66, data = 0x62

[    0.472970] ACPI : EC: EC started

[    0.473212] vgaarb: setting as boot device: PCI:0000:00:02.0

[    0.473213] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[    0.473215] vgaarb: loaded

[    0.473216] vgaarb: bridge control possible 0000:00:02.0

[    0.480887] PCI: Using ACPI for IRQ routing

[    0.509778] PCI: pci_cache_line_size set to 64 bytes

[    0.509847] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]

[    0.509848] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]

[    0.509849] e820: reserve RAM buffer [mem 0x82729000-0x83ffffff]

[    0.509850] e820: reserve RAM buffer [mem 0x851bb000-0x87ffffff]

[    0.509851] e820: reserve RAM buffer [mem 0x86539000-0x87ffffff]

[    0.509853] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]

[    0.510026] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    0.510030] hpet0: 8 comparators, 64-bit 24.000000 MHz counter

[    0.512074] clocksource: Switched to clocksource hpet

[    0.517752] VFS: Disk quotas dquot_6.6.0

[    0.517802] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.517890] pnp: PnP ACPI init

[    0.518219] system 00:00: [io  0x0680-0x069f] has been reserved

[    0.518220] system 00:00: [io  0xffff] has been reserved

[    0.518222] system 00:00: [io  0xffff] has been reserved

[    0.518223] system 00:00: [io  0xffff] has been reserved

[    0.518224] system 00:00: [io  0x1800-0x18fe] has been reserved

[    0.518225] system 00:00: [io  0x164e-0x164f] has been reserved

[    0.518227] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.518338] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.518375] system 00:02: [io  0x1854-0x1857] has been reserved

[    0.518376] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    0.518509] system 00:03: [io  0x0240-0x0259] has been reserved

[    0.518511] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.518554] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)

[    0.518736] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved

[    0.518737] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved

[    0.518738] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved

[    0.518740] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved

[    0.518741] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.518742] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved

[    0.518743] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved

[    0.518745] system 00:05: [mem 0xff000000-0xffffffff] has been reserved

[    0.518746] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved

[    0.518747] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved

[    0.518749] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.518788] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved

[    0.518789] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved

[    0.518790] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved

[    0.518792] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved

[    0.518793] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved

[    0.518794] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved

[    0.518795] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved

[    0.518796] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.519140] system 00:07: [io  0xff00-0xfffe] has been reserved

[    0.519141] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.520450] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved

[    0.520451] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved

[    0.520453] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved

[    0.520454] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.521446] pnp: PnP ACPI: found 9 devices

[    0.530486] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.530499] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.530503] pci 0000:00:1c.0:   bridge window [mem 0xdf000000-0xdf0fffff]

[    0.530510] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    0.530511] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    0.530512] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.530513] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]

[    0.530514] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]

[    0.530515] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]

[    0.530516] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]

[    0.530517] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]

[    0.530518] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]

[    0.530519] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]

[    0.530520] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]

[    0.530521] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]

[    0.530522] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]

[    0.530522] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]

[    0.530523] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]

[    0.530524] pci_bus 0000:00: resource 19 [mem 0x8b000000-0xdfffffff window]

[    0.530525] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window]

[    0.530526] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff]

[    0.530672] NET: Registered protocol family 2

[    0.530845] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[    0.530954] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.531054] TCP: Hash tables configured (established 65536 bind 65536)

[    0.531071] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[    0.531091] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[    0.531132] NET: Registered protocol family 1

[    0.531143] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.531883] PCI: CLS 0 bytes, default 64

[    0.531918] Unpacking initramfs...

[    0.861152] Freeing initrd memory: 18012K (ffffa08c35cc1000 - ffffa08c36e58000)

[    0.861246] DMAR: ACPI device "device:6a" under DMAR at fed91000 as 00:15.0

[    0.861271] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    0.861274] software IO TLB [mem 0x7d72c000-0x8172c000] (64MB) mapped at [ffffa08c7d72c000-ffffa08c8172bfff]

[    0.861382] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer

[    0.861383] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules

[    0.861383] RAPL PMU: hw unit of domain package 2^-14 Joules

[    0.861384] RAPL PMU: hw unit of domain dram 2^-14 Joules

[    0.861384] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules

[    0.861385] RAPL PMU: hw unit of domain psys 2^-14 Joules

[    0.861940] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.861974] audit: initializing netlink subsys (disabled)

[    0.861989] audit: type=2000 audit(1481985559.852:1): initialized

[    0.862450] Initialise system trusted keyrings

[    0.862624] workingset: timestamp_bits=40 max_order=21 bucket_order=0

[    0.862653] zbud: loaded

[    0.901907] Key type asymmetric registered

[    0.901911] Asymmetric key parser 'x509' registered

[    0.901957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[    0.902049] io scheduler noop registered

[    0.902050] io scheduler deadline registered

[    0.902055] io scheduler cfq registered (default)

[    0.902385] aer 0000:00:1c.0:pcie002: service driver aer loaded

[    0.902397] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt

[    0.902398] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt

[    0.902400] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded

[    0.902404] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    0.902408] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    0.902420] efifb: probing for efifb

[    0.902430] efifb: framebuffer at 0xc0000000, using 4160k, total 4160k

[    0.902431] efifb: mode is 1366x768x32, linelength=5504, pages=1

[    0.902431] efifb: scrolling: redraw

[    0.902433] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0

[    0.904766] Console: switching to colour frame buffer device 170x48

[    0.906868] fb0: EFI VGA frame buffer device

[    0.906874] intel_idle: MWAIT substates: 0x11142120

[    0.906875] intel_idle: v0.4.1 model 0x4E

[    0.907092] intel_idle: lapic_timer_reliable_states 0xffffffff

[    0.907212] GHES: HEST is not enabled!

[    0.907288] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    0.907919] Linux agpgart interface v0.103

[    0.907957] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

[    0.907958] AMD IOMMUv2 functionality not available on this system

[    0.908357] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1

[    0.908357] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[    0.909470] serio: i8042 KBD port at 0x60,0x64 irq 1

[    0.909617] mousedev: PS/2 mouse device common for all mice

[    0.909660] rtc_cmos 00:01: RTC can wake from S4

[    0.910065] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0

[    0.910146] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

[    0.910152] intel_pstate: Intel P-state driver initializing

[    0.910371] intel_pstate: HWP enabled

[    0.910536] ledtrig-cpu: registered to indicate activity on CPUs

[    0.910872] NET: Registered protocol family 10

[    0.911145] mip6: Mobile IPv6

[    0.911147] NET: Registered protocol family 17

[    0.911148] mpls_gso: MPLS GSO support

[    0.911354] microcode: sig=0x406e3, pf=0x80, revision=0x9e

[    0.911421] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[    0.911557] registered taskstats version 1

[    0.911558] Loading compiled-in X.509 certificates

[    0.912850] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))

[    0.913121] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'

[    0.913133] zswap: loaded using pool lzo/zbud

[    0.914476] rtc_cmos 00:01: setting system clock to 2016-12-17 14:39:20 UTC (1481985560)

[    0.914528] PM: Hibernation image not present or could not be loaded.

[    0.915394] Freeing unused kernel memory: 1372K (ffffffff92f25000 - ffffffff9307c000)

[    0.915395] Write protecting the kernel read-only data: 10240k

[    0.915602] Freeing unused kernel memory: 32K (ffffa08c6d1f8000 - ffffa08c6d200000)

[    0.917579] Freeing unused kernel memory: 1268K (ffffa08c6d4c3000 - ffffa08c6d600000)

[    0.922882] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    0.934630] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.934678] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.934683] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.935202] random: udevadm: uninitialized urandom read (16 bytes read)

[    0.935222] random: udevadm: uninitialized urandom read (16 bytes read)

[    0.936043] random: udevadm: uninitialized urandom read (16 bytes read)

[    0.936052] random: udevadm: uninitialized urandom read (16 bytes read)

[    0.936431] random: udevadm: uninitialized urandom read (16 bytes read)

[    0.936463] random: udevadm: uninitialized urandom read (16 bytes read)

[    0.936492] random: udevadm: uninitialized urandom read (16 bytes read)

[    0.949524] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    0.950154] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED

[    0.954989] hidraw: raw HID events driver (C) Jiri Kosina

[    0.971227] thermal LNXTHERM:00: registered as thermal_zone0

[    0.971228] ACPI: Thermal Zone [THRM] (45 C)

[    0.975579] SCSI subsystem initialized

[    0.976425] ACPI: bus type USB registered

[    0.976442] usbcore: registered new interface driver usbfs

[    0.976449] usbcore: registered new interface driver hub

[    0.976469] usbcore: registered new device driver usb

[    0.981516] libata version 3.00 loaded.

[    0.982034] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    0.982040] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1

[    0.983179] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810

[    0.983187] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[    0.983342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    0.983343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.983344] usb usb1: Product: xHCI Host Controller

[    0.983345] usb usb1: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd

[    0.983346] usb usb1: SerialNumber: 0000:00:14.0

[    0.983547] hub 1-0:1.0: USB hub found

[    0.983567] hub 1-0:1.0: 12 ports detected

[    0.987630] AVX2 version of gcm_enc/dec engaged.

[    0.987631] AES CTR mode by8 optimization enabled

[    0.988050] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    0.988053] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2

[    0.988280] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003

[    0.988281] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.988283] usb usb2: Product: xHCI Host Controller

[    0.988284] usb usb2: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd

[    0.988285] usb usb2: SerialNumber: 0000:00:14.0

[    0.988413] hub 2-0:1.0: USB hub found

[    0.988424] hub 2-0:1.0: 6 ports detected

[    0.988779] usb: port power management may be unreliable

[    0.989162] ahci 0000:00:17.0: version 3.0

[    0.989458] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode

[    0.989460] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 

[    0.992222] scsi host0: ahci

[    0.992372] scsi host1: ahci

[    0.992427] ata1: SATA max UDMA/133 abar m2048@0xdf133000 port 0xdf133100 irq 124

[    0.992430] ata2: SATA max UDMA/133 abar m2048@0xdf133000 port 0xdf133180 irq 124

[    1.306501] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    1.306535] ata2: SATA link down (SStatus 4 SControl 300)

[    1.307848] ata1.00: ATA-8: HGST HTS541010A7E630, SE0OA4A0, max UDMA/133

[    1.307852] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    1.309849] ata1.00: configured for UDMA/133

[    1.310526] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A7 A4A0 PQ: 0 ANSI: 5

[    1.312139] usb 1-5: new high-speed USB device number 2 using xhci_hcd

[    1.346383] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[    1.346388] sd 0:0:0:0: [sda] 4096-byte physical blocks

[    1.346515] sd 0:0:0:0: [sda] Write Protect is off

[    1.346521] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.346583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.429219]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9

[    1.430965] sd 0:0:0:0: [sda] Attached SCSI disk

[    1.476629] usb 1-5: New USB device found, idVendor=0bda, idProduct=57ec

[    1.476633] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2

[    1.476636] usb 1-5: Product: USB2.0 VGA UVC WebCam

[    1.476638] usb 1-5: Manufacturer: 04081-0005480016021002510

[    1.476640] usb 1-5: SerialNumber: 200901010001

[    1.596140] usb 1-8: new full-speed USB device number 3 using xhci_hcd

[    1.741954] usb 1-8: New USB device found, idVendor=13d3, idProduct=3487

[    1.741958] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.892139] tsc: Refined TSC clocksource calibration: 2400.007 MHz

[    1.892154] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983e30402, max_idle_ns: 440795260848 ns

[    2.684418] PM: Starting manual resume from disk

[    2.684420] PM: Hibernation image partition 8:8 present

[    2.684421] PM: Looking for hibernation image.

[    2.684711] PM: Image not found (code -22)

[    2.684712] PM: Hibernation image not present or could not be loaded.

[    2.869964] random: fast init done

[    2.873645] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)

[    2.916899] clocksource: Switched to clocksource tsc

[    3.883946] ip_tables: (C) 2000-2006 Netfilter Core Team

[    4.030797] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)

[    4.031235] systemd[1]: Detected architecture x86-64.

[    4.045429] systemd[1]: Set hostname to <debian>.

[    4.125728] random: crng init done

[    5.543209] systemd[1]: Reached target Remote File Systems.

[    5.543444] systemd[1]: Listening on udev Kernel Socket.

[    5.543550] systemd[1]: Listening on Journal Socket (/dev/log).

[    5.543609] systemd[1]: Listening on Syslog Socket.

[    5.543989] systemd[1]: Created slice System Slice.

[    5.560801] systemd[1]: Mounting Huge Pages File System...

[    5.561360] systemd[1]: Created slice system-tor.slice.

[    5.954054] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro

[    6.183563] systemd-journald[204]: Received request to flush runtime journal from PID 1

[    6.231226] lp: driver loaded but no devices found

[    6.319395] ppdev: user-space parallel port driver

[    7.108034] ACPI: AC Adapter [AC0] (off-line)

[    7.236846] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input1

[    7.296183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[    7.337181] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed40080-0xfed40fff]

[    7.337227] tpm_crb: probe of MSFT0101:00 failed with error -16

[    7.337357] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2

[    7.338592] ACPI: Lid Switch [LID]

[    7.338644] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3

[    7.338646] ACPI: Sleep Button [SLPB]

[    7.338693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[    7.338695] ACPI: Power Button [PWRF]

[    7.375844] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)

[    7.384841] ACPI: Battery Slot [BAT0] (battery present)

[    7.386029] idma64 idma64.0: Found Intel integrated DMA 64-bit

[    7.386248] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt

[    7.397314] mei_me 0000:00:16.0: enabling device (0000 -> 0002)

[    7.442255] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    7.450368] wmi: Mapper loaded

[    7.484380] EFI Variables Facility v0.08 2004-May-17

[    7.601817] Bluetooth: Core ver 2.21

[    7.601831] NET: Registered protocol family 31

[    7.601831] Bluetooth: HCI device and connection manager initialized

[    7.601833] Bluetooth: HCI socket layer initialized

[    7.601835] Bluetooth: L2CAP socket layer initialized

[    7.601838] Bluetooth: SCO socket layer initialized

[    7.650584] pstore: using zlib compression

[    7.656013] pstore: Registered efi as persistent store backend

[    7.674280] input: PC Speaker as /devices/platform/pcspkr/input/input5

[    7.729858] usbcore: registered new interface driver btusb

[    7.730422] Bluetooth: HCI UART driver ver 2.3

[    7.730423] Bluetooth: HCI UART protocol H4 registered

[    7.730423] Bluetooth: HCI UART protocol BCSP registered

[    7.730424] Bluetooth: HCI UART protocol LL registered

[    7.730424] Bluetooth: HCI UART protocol ATH3K registered

[    7.730425] Bluetooth: HCI UART protocol Three-wire (H5) registered

[    7.730444] Bluetooth: HCI UART protocol Intel registered

[    7.730453] Bluetooth: HCI UART protocol BCM registered

[    7.730453] Bluetooth: HCI UART protocol QCA registered

[    7.746321] usbcore: registered new interface driver ath3k

[    7.799078] [drm] Initialized drm 1.1.0 20060810

[    7.872028] iTCO_vendor_support: vendor-support=0

[    7.912876] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[    7.913095] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)

[    7.913239] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    7.978058] asus_wmi: ASUS WMI generic driver loaded

[    8.054642] asus_wmi: Initialization: 0x1

[    8.054781] asus_wmi: BIOS WMI version: 7.9

[    8.054925] asus_wmi: SFUN value: 0xa0065

[    8.059317] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6

[    8.064231] asus_wmi: Number of fans: 1

[    8.374574] input: Elan Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1000:00/input/input7

[    8.444525] [drm] Memory usable by graphics device = 4096M

[    8.444528] checking generic (c0000000 410000) vs hw (c0000000 10000000)

[    8.444528] fb: switching to inteldrmfb from EFI VGA

[    8.444564] Console: switching to colour dummy device 80x25

[    8.444639] [drm] Replacing VGA console driver

[    8.452206] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    8.452208] [drm] Driver supports precise vblank timestamp query.

[    8.458996] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    8.482482] [drm] GuC firmware load skipped

[    8.499525] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[    8.507240] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

[    8.507540] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[    8.507550] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0

[    8.509539] fbcon: inteldrmfb (fb0) is primary device

[    8.644146] ath: phy0: ASPM enabled: 0x42

[    8.644149] ath: EEPROM regdomain: 0x6a

[    8.644150] ath: EEPROM indicates we should expect a direct regpair map

[    8.644153] ath: Country alpha2 being used: 00

[    8.644154] ath: Regpair used: 0x6a

[    8.685754] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[    8.686420] ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xffffc1fdc0f00000, irq=17

[    8.760806] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin

[    8.761641] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)

[    8.967426] intel_rapl: Found RAPL domain package

[    8.967430] intel_rapl: Found RAPL domain core

[    8.967433] intel_rapl: Found RAPL domain uncore

[    8.967437] intel_rapl: Found RAPL domain dram

[    9.076515] input: FTSC1000:00 2808:50E6 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTSC1000:00/0018:2808:50E6.0001/input/input9

[    9.076884] hid-multitouch 0018:2808:50E6.0001: input,hidraw0: I2C HID v1.00 Device [FTSC1000:00 2808:50E6] on i2c-FTSC1000:00

[    9.149708] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0

[    9.266191] media: Linux media interface: v0.10

[    9.295056] Linux video capture interface: v2.00

[    9.416928] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (0bda:57ec)

[    9.417837] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!

[    9.417843] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!

[    9.417846] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!

[    9.418052] input: USB2.0 VGA UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input11

[    9.418193] usbcore: registered new interface driver uvcvideo

[    9.418194] USB Video Class driver (1.1.1)

[    9.602178] Console: switching to colour frame buffer device 170x48

[    9.626346] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[    9.752801] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[    9.752806] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[    9.752810] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)

[    9.752813] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[    9.752815] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[    9.752819] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12

[    9.798101] [drm] RC6 on

[    9.806189] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12

[    9.806376] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13

[    9.806546] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14

[    9.806710] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15

[   10.653487] Adding 6184956k swap on /dev/sda8.  Priority:-1 extents:1 across:6184956k FS

[   13.024991] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)

[   15.916256] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   15.916258] Bluetooth: BNEP filters: protocol multicast

[   15.916263] Bluetooth: BNEP socket layer initialized

[   18.645018] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   18.656976] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   18.670852] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   19.275891] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   22.975760] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   23.026212] wlp1s0: authenticate with 48:ee:0c:12:d1:1b

[   23.035866] wlp1s0: send auth to 48:ee:0c:12:d1:1b (try 1/3)

[   23.037826] wlp1s0: authenticated

[   23.040237] wlp1s0: associate with 48:ee:0c:12:d1:1b (try 1/3)

[   23.044745] wlp1s0: RX AssocResp from 48:ee:0c:12:d1:1b (capab=0x411 status=0 aid=1)

[   23.044849] wlp1s0: associated

[   23.044885] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready

[   28.937851] Bluetooth: RFCOMM TTY layer initialized

[   28.937856] Bluetooth: RFCOMM socket layer initialized

[   28.937860] Bluetooth: RFCOMM ver 1.11

[   45.770931] fuse init (API version 7.25)

[  269.311885] wlp1s0: deauthenticating from 48:ee:0c:12:d1:1b by local choice (Reason: 3=DEAUTH_LEAVING)

[  269.334757] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[  271.911350] PM: Syncing filesystems ... done.

[  272.749549] PM: Preparing system for sleep (mem)

[  272.749640] (NULL device *): firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin

[  272.749697] Freezing user space processes ... (elapsed 0.001 seconds) done.

[  272.751362] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) 

[  272.751433] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.

[  272.752584] PM: Suspending system (mem)

[  272.752620] Suspending console(s) (use no_console_suspend to debug)

[  272.755339] sd 0:0:0:0: [sda] Synchronizing SCSI cache

[  272.942411] sd 0:0:0:0: [sda] Stopping disk

[  273.499025] PM: suspend of devices complete after 746.548 msecs

[  273.518899] PM: late suspend of devices complete after 19.872 msecs

[  273.521139] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI

[  273.558851] PM: noirq suspend of devices complete after 39.959 msecs

[  273.559740] ACPI: Preparing to enter system sleep state S3

[  273.571268] ACPI : EC: EC stopped

[  273.571268] PM: Saving platform NVS memory

[  273.571354] Disabling non-boot CPUs ...

[  273.572545] smpboot: CPU 1 is now offline

[  273.574229] smpboot: CPU 2 is now offline

[  273.575620] smpboot: CPU 3 is now offline

[  273.578245] ACPI: Low-level resume complete

[  273.578357] ACPI : EC: EC started

[  273.578357] PM: Restoring platform NVS memory

[  273.580604] Enabling non-boot CPUs ...

[  273.580661] x86: Booting SMP configuration:

[  273.580662] smpboot: Booting Node 0 Processor 1 APIC 0x2

[  273.584547]  cache: parent cpu1 should not be sleeping

[  273.584713] CPU1 is up

[  273.584756] smpboot: Booting Node 0 Processor 2 APIC 0x1

[  273.587369]  cache: parent cpu2 should not be sleeping

[  273.587523] CPU2 is up

[  273.587565] smpboot: Booting Node 0 Processor 3 APIC 0x3

[  273.590058]  cache: parent cpu3 should not be sleeping

[  273.590221] CPU3 is up

[  273.593509] ACPI: Waking up from system sleep state S3

[  273.642106] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI

[  273.642231] PM: noirq resume of devices complete after 37.205 msecs

[  273.656993] PM: early resume of devices complete after 14.721 msecs

[  273.657343] usb usb1: root hub lost power or was reset

[  273.657346] usb usb2: root hub lost power or was reset

[  273.657419] ath: phy0: ASPM enabled: 0x42

[  273.659725] sd 0:0:0:0: [sda] Starting disk

[  273.659820] rtc_cmos 00:01: System wakeup disabled by ACPI

[  273.667097] [drm] GuC firmware load skipped

[  273.974026] ata2: SATA link down (SStatus 4 SControl 300)

[  274.006441] usb 1-5: reset high-speed USB device number 2 using xhci_hcd

[  274.266171] usb 1-8: reset full-speed USB device number 3 using xhci_hcd

[  274.406586] usb 1-8: device firmware changed

[  274.726850] PM: resume of devices complete after 1070.214 msecs

[  274.727472] PM: Finishing wakeup.

[  274.727474] Restarting tasks ... 

[  274.727607] usb 1-8: USB disconnect, device number 3

[  274.739175] done.

[  274.857477] usb 1-8: new full-speed USB device number 4 using xhci_hcd

[  274.998363] usb 1-8: New USB device found, idVendor=13d3, idProduct=3487

[  274.998364] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[  275.565688] [drm] RC6 on

[  275.833206] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[  275.836144] ata1.00: configured for UDMA/133

[  275.942043] usb 1-8: firmware: direct-loading firmware ar3k/AthrBT_0x11020100.dfu

[  276.458016] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[  276.469580] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[  276.476516] usb 1-8: firmware: direct-loading firmware ar3k/ramps_0x11020100_40.dfu

[  276.480909] usb 1-8: USB disconnect, device number 4

[  276.483041] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[  276.544397] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[  276.781356] usb 1-8: new full-speed USB device number 5 using xhci_hcd

[  276.930022] usb 1-8: New USB device found, idVendor=13d3, idProduct=3487

[  276.930025] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[  280.222299] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[  280.275791] wlp1s0: authenticate with 48:ee:0c:12:d1:1b

[  280.285497] wlp1s0: send auth to 48:ee:0c:12:d1:1b (try 1/3)

[  280.287365] wlp1s0: authenticated

[  280.291747] wlp1s0: associate with 48:ee:0c:12:d1:1b (try 1/3)

[  280.296214] wlp1s0: RX AssocResp from 48:ee:0c:12:d1:1b (capab=0x411 status=0 aid=3)

[  280.296356] wlp1s0: associated

[  280.296432] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready

root@debian:/home/bruno# 

 

Pebis
(usa Debian)

Enviado em 17/12/2016 - 16:02h

o que eu quis dizer foi para você investigar o que é esse pacote TPM, o que ele fez e ver se falta alguma biblioteca para configurá-lo.

e o comando apt show mostra informações sobre os pacotes, útil antes de instalar.

intsdvd
(usa Debian)

Enviado em 17/12/2016 - 19:18h

Blz Pebis, ainda sou bastante iniciante no GNU-Linux. Tentei o "apt show" aqui com todas as variações de maiúsculo/minúsculo para tpm e tpm-tools, mas a única resposta que tenho é:

N: Impossível encontrar o pacote 

E: Nenhum pacote encontrado

 

Também descobri (ou pelo menos foi o que entendi) que esse pacote não existe para o Debian Stretch que eu uso (https://packages.debian.org/jessie/admin/tpm-tools).