Modem não disca no kurumin 3.1

lcnrj
(usa Lubuntu)

Enviado em 18/05/2008 - 03:55h

Oi gente, segui os passos abaixo e o modem até que deu sinal de vida. Antes (READPORT 0x0273) estáva desabilitada. Bom agora vou no Kppp e naquela paradinha de perguntar ao modem, é feito mas as 7 perguntas vem em branco. Uso o oi internet, DNS configurado ok, mas quando aperto conectar aparece "iniciando modem..." e só! Não disca. O que posso fazer?
Uso kurumin 3.1 e acho que esse modem Rockwell DPF isa PNP é um hardmodem.
Segue abaixo os comandos que deu.
Valeu!
http://forum.clubedohardware.com.br/images/smilies/confused.gif
:confused:

==============///\\\\======================================
root@garfield:/home/kurumin# pnpdump
# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Board 1 has serial identifier 2d 9f 00 1c 72 30 00 eb 49

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 2d 9f 00 1c 72 30 00 eb 49)
# Vendor Id ROK0030, Serial Number 2667584626, checksum 0x2D.
# ANSI string -->Rockwell V.34 Plug & Play Modem<--
# Version 1.0, Vendor version 0.0
#
# Logical device id ROK0030
# Device supports I/O range check register
# Device supports vendor reserved register @ 0x3c
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ROK0030/2667584626 (LD 0

# Multiple choice time, choose one only !

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x03f8
# Maximum IO base address 0x03f8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x03f8) (CHECK))
# IRQ 4.
# High true, level sensitive interrupt
# (INT 0 (IRQ 4 (MODE +L)))

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x02f8
# Maximum IO base address 0x02f8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x02f8) (CHECK))
# IRQ 3.
# High true, level sensitive interrupt
# (INT 0 (IRQ 3 (MODE +L)))

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x03e8
# Maximum IO base address 0x03e8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x03e8) (CHECK))
# IRQ 4.
# High true, level sensitive interrupt
# (INT 0 (IRQ 4 (MODE +L)))

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x02e8
# Maximum IO base address 0x02e8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x02e8) (CHECK))
# IRQ 3.
# High true, level sensitive interrupt
# (INT 0 (IRQ 3 (MODE +L)))

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x03f8
# Maximum IO base address 0x03f8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x03f8) (CHECK))
# IRQ 3, 5, 7, 9, 10, 11, 12 or 15.
# High true, level sensitive interrupt
# (INT 0 (IRQ 3 (MODE +L)))

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x02f8
# Maximum IO base address 0x02f8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x02f8) (CHECK))
# IRQ 4, 5, 7, 9, 10, 11, 12 or 15.
# High true, level sensitive interrupt
# (INT 0 (IRQ 4 (MODE +L)))

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x03e8
# Maximum IO base address 0x03e8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x03e8) (CHECK))
# IRQ 3, 5, 7, 9, 10, 11, 12 or 15.
# High true, level sensitive interrupt
# (INT 0 (IRQ 3 (MODE +L)))

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x02e8
# Maximum IO base address 0x02e8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x02e8) (CHECK))
# IRQ 4, 5, 7, 9, 10, 11, 12 or 15.
# High true, level sensitive interrupt
# (INT 0 (IRQ 4 (MODE +L)))

# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0100
# Maximum IO base address 0xfff8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0100) (CHECK))
# IRQ 3, 4, 5, 7, 9, 10, 11, 12 or 15.
# High true, level sensitive interrupt
# (INT 0 (IRQ 3 (MODE +L)))

# End dependent functions
(NAME "ROK0030/2667584626[0]{Rockwell V.34 Plug & Play Modem}")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)



root@garfield:/home/kurumin#
root@garfield:/home/kurumin# isapnp /etc/isapnp.conf
Board 1 has Identity 2d 9f 00 1c 72 30 00 eb 49: ROK0030 Serial No 2667584626 [checksum 2d]
ROK0030/2667584626[0]{Rockwell V.34 Plug & Play Modem}: --- Enabled OK
root@garfield:/home/kurumin#


root@garfield:/home/kurumin# lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Subsystem: ABIT Computer Corp. KT7/KT7-RAID/KT7A/KT7A-RAID Mainboard
Flags: bus master, medium devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-i
f 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40
)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master
IDE (rev 06) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at c000 [size=16]
Capabilities: [c0] Power Management version 2

00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2

00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2

00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40
)
Flags: medium devsel, IRQ 7
Capabilities: [68] Power Management version 2

00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
Subsystem: Creative Labs CT4760 SBLive!
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at cc00 [size=32]
Capabilities: [dc] Power Management version 1

00:0d.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at d000 [size=8]
Capabilities: [dc] Power Management version 1

00:0f.0 VGA compatible controller: S3 Inc. 86c325 [ViRGE] (rev 06) (prog-if 00 [ VGA])
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at d4000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]

00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/3 70/370A/372 (rev 04)
Subsystem: Triones Technologies, Inc. HPT370A
Flags: bus master, 66Mhz, medium devsel, latency 120, IRQ 11
I/O ports at d400 [size=8]
I/O ports at d800 [size=4]
I/O ports at dc00 [size=8]
I/O ports at e000 [size=4]
I/O ports at e400 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2

root@garfield:/home/kurumin#


root@garfield:/home/kurumin# cat /proc/tty/driver/serial
serinfo:1.0 driver:5.05c revision:2001-07-08
0: uart:16550A port:3F8 irq:4 baud:9600 tx:253 rx:0
1: uart:16550A port:2F8 irq:3 baud:1200 tx:0 rx:58751 brk:3707 RTS|DTR
2: uart:16550A port:3E8 irq:4 baud:9600 tx:0 rx:0 CTS|DSR
root@garfield:/home/kurumin#

===========================////==========================
http://forum.clubedohardware.com.br/images/smilies/wacko.gif
:wacko: