Ubuntu16.04.4 muito lento no boot. [RESOLVIDO]

EuricoNT
(usa XUbuntu)

Enviado em 21/03/2018 - 01:04h

Gente, sou novo nesse mundo, portanto de cara já peço desculpa por qualquer burrice que eu possa vir a dizer.
Mas eu estou com um problema, meu computador demora de 4 a 5 minutos para dar boot, as vezes até mais. E eu realmente não faço idéia do que pode ser. Rodei um tal de boot-repair, mas não ajudou em muita coisa, ou eu não soube mexer nele direito. Bom, ele me devolveu esse arquivo abaixo, mas não entendi muita coisa. Será que poderiam me dar uma ajuda? Ou ao menos uma dica. Ainda estou aprendendo, migrei para o Linux faz pouco tempo. Mas agradeceria alguma ajuda.
Minha máquina até que não é ruim, tenho um é um Dell com um i7 de quinta geração, 8gb de ram, uma placa nvidia. Não sei se tem alguma coisa a ver, mas eu não uso o Unity, uso XFCE4.
Obrigado.

Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/grub. It also embeds following components:

modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------

sda1: __________________________________________________________________________

File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /grub/i386-pc/core.img

sda2: __________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________________________________

File system: LVM2_member
Boot sector type: -
Boot sector info:

ubuntu-vg-root: ________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.4 LTS
Boot files: /etc/fstab

ubuntu-vg-swap_1: ______________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 2,048 999,423 997,376 83 Linux
/dev/sda2 1,001,470 1,953,523,711 1,952,522,242 5 Extended
/dev/sda5 1,001,472 1,953,523,711 1,952,522,240 8e Linux LVM


"blkid" output: ________________________________________________________________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/mapper/ubuntu--vg-root 2120e676-d428-46a5-9063-7a47a2bd58fe ext4
/dev/mapper/ubuntu--vg-swap_1 83d7de35-de72-4ad8-95da-9ce806920cb1 swap
/dev/sda1 9bfbf930-cfa4-4151-b7ac-95ffb24de154 ext2
/dev/sda5 3z4emI-Aptc-uv2v-atsH-hMZW-nZrd-oBWzjU LVM2_member

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root 9 Mar 20 23:13 ata-HL-DT-ST_DVD+_-RW_GU90N_M54D9IB5605 -> ../../sr0
lrwxrwxrwx 1 root root 9 Mar 21 00:16 ata-ST1000LM024_HN-M101MBB_S314J90DB55737 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 21 00:16 ata-ST1000LM024_HN-M101MBB_S314J90DB55737-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 21 00:16 ata-ST1000LM024_HN-M101MBB_S314J90DB55737-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 21 00:16 ata-ST1000LM024_HN-M101MBB_S314J90DB55737-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Mar 21 00:16 dm-name-ubuntu--vg-root -> ../../dm-0
lrwxrwxrwx 1 root root 10 Mar 21 00:16 dm-name-ubuntu--vg-swap_1 -> ../../dm-1
lrwxrwxrwx 1 root root 10 Mar 21 00:16 dm-uuid-LVM-FwatSXygZ5AY36L933qMXgWdPmj8B7qJYLjXti8PZmx37pcX09yeef0NNd70Kqzb -> ../../dm-1
lrwxrwxrwx 1 root root 10 Mar 21 00:16 dm-uuid-LVM-FwatSXygZ5AY36L933qMXgWdPmj8B7qJvwUIfMhHMfPMRixdMm0L0LjHOaRJF5O2 -> ../../dm-0
lrwxrwxrwx 1 root root 10 Mar 21 00:16 lvm-pv-uuid-3z4emI-Aptc-uv2v-atsH-hMZW-nZrd-oBWzjU -> ../../sda5
lrwxrwxrwx 1 root root 9 Mar 21 00:16 wwn-0x50004cf20bc180b9 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 21 00:16 wwn-0x50004cf20bc180b9-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 21 00:16 wwn-0x50004cf20bc180b9-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 21 00:16 wwn-0x50004cf20bc180b9-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Mar 20 23:13 wwn-0x5001480000000000 -> ../../sr0

========================= "ls -R /dev/mapper/" output: =========================

/dev/mapper:
control
ubuntu--vg-root
ubuntu--vg-swap_1

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/mapper/ubuntu--vg-root / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/mapper/ubuntu--vg-root /var/lib/docker/overlay2 ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 /boot ext2 (rw,relatime,block_validity,barrier,user_xattr,acl)


============================= sda1/grub/grub.cfg: ==============================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}

if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod lvm
insmod ext2
set root='lvmid/FwatSX-ygZ5-AY36-L933-qMXg-WdPm-j8B7qJ/vwUIfM-hHMf-PMRi-xdMm-0L0L-jHOa-RJF5O2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/FwatSX-ygZ5-AY36-L933-qMXg-WdPm-j8B7qJ/vwUIfM-hHMf-PMRi-xdMm-0L0L-jHOa-RJF5O2' 2120e676-d428-46a5-9063-7a47a2bd58fe
else
search --no-floppy --fs-uuid --set=root 2120e676-d428-46a5-9063-7a47a2bd58fe
fi
font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=pt_BR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 45,51,53; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
linux /vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-4.14.13-041413-generic
}
submenu 'Opções avançadas para Ubuntu' $menuentry_id_option 'gnulinux-advanced-2120e676-d428-46a5-9063-7a47a2bd58fe' {
menuentry 'Ubuntu, com Linux 4.14.13-041413-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.14.13-041413-generic-advanced-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.14.13-041413-generic ...'
linux /vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.14.13-041413-generic
}
menuentry 'Ubuntu, with Linux 4.14.13-041413-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.14.13-041413-generic-init-upstart-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.14.13-041413-generic ...'
linux /vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.14.13-041413-generic
}
menuentry 'Ubuntu, with Linux 4.14.13-041413-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.14.13-041413-generic-recovery-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.14.13-041413-generic ...'
linux /vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.14.13-041413-generic
}
menuentry 'Ubuntu, com Linux 4.4.0-117-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-117-generic-advanced-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.4.0-117-generic ...'
linux /vmlinuz-4.4.0-117-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.4.0-117-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-117-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-117-generic-init-upstart-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.4.0-117-generic ...'
linux /vmlinuz-4.4.0-117-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.4.0-117-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-117-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-117-generic-recovery-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.4.0-117-generic ...'
linux /vmlinuz-4.4.0-117-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.4.0-117-generic
}
menuentry 'Ubuntu, com Linux 4.4.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-34-generic-advanced-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.4.0-34-generic ...'
linux /vmlinuz-4.4.0-34-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.4.0-34-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-34-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-34-generic-init-upstart-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.4.0-34-generic ...'
linux /vmlinuz-4.4.0-34-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.4.0-34-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-34-generic-recovery-2120e676-d428-46a5-9063-7a47a2bd58fe' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
echo 'Carregando Linux 4.4.0-34-generic ...'
linux /vmlinuz-4.4.0-34-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Carregando ramdisk inicial ...'
initrd /initrd.img-4.4.0-34-generic
}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
knetbsd /memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9bfbf930-cfa4-4151-b7ac-95ffb24de154
else
search --no-floppy --fs-uuid --set=root 9bfbf930-cfa4-4151-b7ac-95ffb24de154
fi
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

0.389694214 = 0.418430976 grub/grub.cfg 11
0.383208275 = 0.411466752 grub/i386-pc/core.img 2
0.270696640 = 0.290658304 vmlinuz-4.14.13-041413-generic 11
0.074037552 = 0.079497216 vmlinuz-4.4.0-117-generic 11
0.377945900 = 0.405816320 vmlinuz-4.4.0-34-generic 10
0.457722664 = 0.491475968 initrd.img-4.14.13-041413-generic 19
0.389682770 = 0.418418688 initrd.img-4.4.0-117-generic 13
0.388868332 = 0.417544192 initrd.img-4.4.0-34-generic 16

========================== ubuntu-vg-root/etc/fstab: ===========================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=9bfbf930-cfa4-4151-b7ac-95ffb24de154 /boot ext2 defaults 0 2
/dev/mapper/ubuntu--vg-swap_1 none swap sw 0 0
--------------------------------------------------------------------------------

============== ubuntu-vg-root: Location of files loaded by Grub: ===============

GiB - GB File Fragment(s)

0.073060989 = 0.078448640 vmlinuz 11
0.388706207 = 0.417370112 initrd.img 13

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/24422/mounts) leaked on lvs invocation. Parent PID 32733: bash
File descriptor 63 (pipe:[454528]) leaked on lvs invocation. Parent PID 32733: bash
File descriptor 9 (/proc/24422/mounts) leaked on lvchange invocation. Parent PID 1057: bash
File descriptor 63 (pipe:[454528]) leaked on lvchange invocation. Parent PID 1057: bash
File descriptor 9 (/proc/24422/mounts) leaked on lvchange invocation. Parent PID 1057: bash
File descriptor 63 (pipe:[454528]) leaked on lvchange invocation. Parent PID 1057: bash

ADDITIONAL INFORMATION :
=================== log of boot-repair 20180321_0016 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
BLKID BEFORE LVM ACTIVATION:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="9bfbf930-cfa4-4151-b7ac-95ffb24de154" TYPE="ext2" PARTUUID="0a73e05e-01"
/dev/sda5: UUID="3z4emI-Aptc-uv2v-atsH-hMZW-nZrd-oBWzjU" TYPE="LVM2_member" PARTUUID="0a73e05e-05"
/dev/mapper/ubuntu--vg-root: UUID="2120e676-d428-46a5-9063-7a47a2bd58fe" TYPE="ext4"
/dev/loop8: TYPE="squashfs"
/dev/mapper/ubuntu--vg-swap_1: UUID="83d7de35-de72-4ad8-95da-9ce806920cb1" TYPE="swap"
/dev/loop9: TYPE="squashfs"
MODPROBE
VGSCAN
File descriptor 9 (/proc/24422/mounts) leaked on vgscan invocation. Parent PID 24430: /bin/bash
Reading all physical volumes. This may take a while...
Found volume group "ubuntu-vg" using metadata type lvm2
VGCHANGE
File descriptor 9 (/proc/24422/mounts) leaked on vgchange invocation. Parent PID 24430: /bin/bash
2 logical volume(s) in volume group "ubuntu-vg" now active
File descriptor 9 (/proc/24422/mounts) leaked on lvscan invocation. Parent PID 24430: /bin/bash
LVSCAN:
ACTIVE '/dev/ubuntu-vg/root' [923.12 GiB] inherit
ACTIVE '/dev/ubuntu-vg/swap_1' [7.91 GiB] inherit
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
Há RAID neste computador? no
File descriptor 9 (/proc/24422/mounts) leaked on lvs invocation. Parent PID 26316: /bin/sh
boot-repair is executed in installed-session (Ubuntu 16.04.4 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
Set sda as corresponding disk of mapper/ubuntu--vg-root
Set sda as corresponding disk of mapper/ubuntu--vg-root

=================== os-prober:
/dev/mapper/ubuntu--vg-root:o SO atualmente em uso - Ubuntu 16.04.4 LTS CurrentSession:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="9bfbf930-cfa4-4151-b7ac-95ffb24de154" TYPE="ext2" PARTUUID="0a73e05e-01"
/dev/sda5: UUID="3z4emI-Aptc-uv2v-atsH-hMZW-nZrd-oBWzjU" TYPE="LVM2_member" PARTUUID="0a73e05e-05"
/dev/mapper/ubuntu--vg-root: UUID="2120e676-d428-46a5-9063-7a47a2bd58fe" TYPE="ext4"
/dev/loop8: TYPE="squashfs"
/dev/mapper/ubuntu--vg-swap_1: UUID="83d7de35-de72-4ad8-95da-9ce806920cb1" TYPE="swap"
/dev/loop9: TYPE="squashfs"

Set sda as corresponding disk of mapper/ubuntu--vg-root

1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Fev 24 15:19 grub.d
total 80
-rwxr-xr-x 1 root root 9791 Jun 17 2016 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Mar 1 2017 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot detected in the fstab of mapper/ubuntu--vg-root: UUID=9bfbf930-cfa4-4151-b7ac-95ffb24de154 (sda1)

=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
mapper/ubuntu--vg-root : sda, not-sepboot, grubenv-ok grub2, grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-has-goodBOOT, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, .
sda1 : sda, is-sepboot, grubenv-ok nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot.

sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA ST1000LM024 HN-M:;
1:1049kB:512MB:511MB:ext2::boot;
2:513MB:1000GB:1000GB:::;
5:513MB:1000GB:1000GB:::lvm;

BYT;
/dev/mapper/ubuntu--vg-swap_1:8489MB:dm:512:512:loop:Linux device-mapper (linear):;
1:0.00B:8489MB:8489MB:linux-swap(v1)::;

BYT;
/dev/mapper/ubuntu--vg-root:991GB:dm:512:512:loop:Linux device-mapper (linear):;
1:0.00B:991GB:991GB:ext4::;

=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop1 loop squashfs 345,2M
loop8 loop squashfs 81,6M
loop6 loop squashfs 81,7M
loop4 loop squashfs 8,6M
sr0 rom 1024M
loop2 loop squashfs 132,7M
loop0 loop squashfs 4K
loop9 loop squashfs 310,8M
sda disk 931,5G
sda2 part 1K
sda5 part LVM2_member 931G
dm-1 lvm swap 7,9G
dm-0 lvm ext4 923,1G
sda1 part ext2 487M
loop7 loop squashfs 93,5M
loop5 loop squashfs 135,5M
loop3 loop squashfs 81,7M

KNAME ROTA RO RM STATE MOUNTPOINT
loop1 1 1 0 /snap/anbox/46
loop8 1 1 0 /snap/core/4110
loop6 1 1 0 /snap/core/4206
loop4 1 1 0 /snap/sublime-text-3/11
sr0 1 0 1 running
loop2 1 1 0 /snap/chromium/237
loop0 1 1 0 /snap/anbox-installer/17
loop9 1 1 0
sda 1 0 0 running
sda2 1 0 0
sda5 1 0 0
dm-1 1 0 0 running [SWAP]
dm-0 1 0 0 running /
sda1 1 0 0 /boot
loop7 1 1 0 /snap/slack/5
loop5 1 1 0 /snap/gimp/30
loop3 1 1 0 /snap/core/4017


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4004088k,nr_inodes=1001022,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=806752k,mode=755)
/dev/mapper/ubuntu--vg-root on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=527)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/anbox-installer_17.snap on /snap/anbox-installer/17 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/anbox_46.snap on /snap/anbox/46 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/chromium_237.snap on /snap/chromium/237 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/gimp_30.snap on /snap/gimp/30 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/sublime-text-3_11.snap on /snap/sublime-text-3/11 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/slack_5.snap on /snap/slack/5 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/core_4110.snap on /snap/core/4110 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/core_4206.snap on /snap/core/4206 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/core_4017.snap on /snap/core/4017 type squashfs (ro,nodev,relatime)
/dev/sda1 on /boot type ext2 (rw,relatime,block_validity,barrier,user_xattr,acl)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
lxcfs on /var/lib/lxcfs type fuse.lxcfs (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other)
tmpfs on /run/snapd/ns type tmpfs (rw,nosuid,noexec,relatime,size=806752k,mode=755)
vmware-vmblock on /run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other)
nsfs on /run/snapd/ns/anbox.mnt type nsfs (rw)
/dev/mapper/ubuntu--vg-root on /var/lib/docker/overlay2 type ext4 (rw,relatime,errors=remount-ro,data=ordered)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=806752k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/dm-0 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/dm-1 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): adsp autofs autopilot-uinput block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dm-0 dm-1 dri drm_dp_aux0 dsp dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mixer mqueue mtd0 mtd0ro net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout ubuntu-vg uhid uinput urandom usb userio v4l vboxusb vfio vga_arbiter vhci vhost-net vhost-vsock video0 vmci vsock zero
ls /dev/mapper: control ubuntu--vg-root ubuntu--vg-swap_1

=================== df -Th:

Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 788M 9.7M 779M 2% /run
/dev/mapper/ubuntu--vg-root ext4 909G 454G 410G 53% /
tmpfs tmpfs 3.9G 142M 3.8G 4% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/loop0 squashfs 128K 128K 0 100% /snap/anbox-installer/17
/dev/loop1 squashfs 346M 346M 0 100% /snap/anbox/46
/dev/loop2 squashfs 133M 133M 0 100% /snap/chromium/237
/dev/loop5 squashfs 136M 136M 0 100% /snap/gimp/30
/dev/loop4 squashfs 8.7M 8.7M 0 100% /snap/sublime-text-3/11
/dev/loop7 squashfs 94M 94M 0 100% /snap/slack/5
/dev/loop8 squashfs 82M 82M 0 100% /snap/core/4110
/dev/loop6 squashfs 82M 82M 0 100% /snap/core/4206
/dev/loop3 squashfs 82M 82M 0 100% /snap/core/4017
/dev/sda1 ext2 472M 175M 273M 40% /boot
tmpfs tmpfs 788M 60K 788M 1% /run/user/1000

=================== fdisk -l:
Disk /dev/loop0: 4 KiB, 4096 bytes, 8 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 345.2 MiB, 361996288 bytes, 707024 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 132.7 MiB, 139120640 bytes, 271720 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 81.7 MiB, 85639168 bytes, 167264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 8.6 MiB, 8957952 bytes, 17496 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 135.5 MiB, 142045184 bytes, 277432 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 81.7 MiB, 85692416 bytes, 167368 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 93.5 MiB, 98058240 bytes, 191520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0a73e05e

Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 999423 997376 487M 83 Linux
/dev/sda2 1001470 1953523711 1952522242 931G 5 Extended
/dev/sda5 1001472 1953523711 1952522240 931G 8e Linux LVM




Disk /dev/mapper/ubuntu--vg-root: 923.1 GiB, 991197921280 bytes, 1935933440 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop8: 81.6 MiB, 85549056 bytes, 167088 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/ubuntu--vg-swap_1: 7.9 GiB, 8489271296 bytes, 16580608 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop9: 310.8 MiB, 325902336 bytes, 636528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to enable-lvm) and reinstall the grub2 of mapper/ubuntu--vg-root into the MBR of sda, using the following options: sda1/boot,
Additional repair would be performed: unhide-bootmenu-10s


=================== User settings
The settings chosen by the user will not act on the boot.

patrickpcs
(usa Nenhuma)

Enviado em 21/03/2018 - 07:11h

Meu caro, após conseguir iniciar sua máquina por gentileza execute o seguinte comando;

dmesg -H --nopager

 

Se preferir não use a opção --nopager, assim você pode usar as setas do teclado para rolar a página. Verás que em cada linha terá uma marcação de tempo. Quanto tempo levou depois da linha anterior, então procure por grandes quantidades de tempo ;)


Isto ira mostrar todo o processo do boot e quanto tempo levou entre cada ação. Será a maneira mais fácil de saber o que está demorando tanto.
Sinta-se livre para postar a saída desse comando aqui, mas saiba que ele irá expor bastante informação sobre o seu hardware (modelos, números de série, mac, blah blah blah).

A ferramenta que você usou anteriormente parece estar focada mais no grub e identificação das partições, não acredito que ela seja útil na situação que você descreveu, mas foi uma boa tentativa :)

EuricoNT
(usa XUbuntu)

Enviado em 21/03/2018 - 16:35h

Rodei ~$dmesg - H e me retornou isso: Alguma idéia?

eurico@eurico-Inspiron-5437:~$ dmesg -H
[Mar21 16:07] microcode: microcode updated early to revision 0x20, date = 2017-01-27
[ +0,000000] Linux version 4.14.13-041413-generic (kernel@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201801101001 SMP Wed Jan 10 10:02:53 UTC 2018
[ +0,000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ +0,000000] KERNEL supported cpus:
[Mar21 16:07] microcode: microcode updated early to revision 0x20, date = 2017-01-27
[ +0,000000] Linux version 4.14.13-041413-generic (kernel@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201801101001 SMP Wed Jan 10 10:02:53 UTC 2018
[ +0,000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ +0,000000] KERNEL supported cpus:
[ +0,000000] Intel GenuineIntel
[ +0,000000] AMD AuthenticAMD
[ +0,000000] Centaur CentaurHauls
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ +0,000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0,000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ +0,000000] e820: BIOS-provided physical RAM map:
[ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ +0,000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bae6cfff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000bae6d000-0x00000000bae73fff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000bae74000-0x00000000bb29ffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000bb2a0000-0x00000000bb89bfff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000bb89c000-0x00000000ca8c9fff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000ca8ca000-0x00000000cadbafff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000cadbb000-0x00000000cadd8fff] ACPI data
[ +0,000000] BIOS-e820: [mem 0x00000000cadd9000-0x00000000cb6edfff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000cb6ee000-0x00000000cbffefff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ +0,000000] NX (Execute Disable) protection: active
[ +0,000000] random: fast init done
[ +0,000000] SMBIOS 2.7 present.
[ +0,000000] DMI: Dell Inc. Inspiron 5437/03X56P, BIOS A09 01/24/2014
[ +0,000000] tsc: Fast TSC calibration using PIT
[ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ +0,000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ +0,000000] MTRR default type: uncachable
[ +0,000000] MTRR fixed ranges enabled:
[ +0,000000] 00000-9FFFF write-back
[ +0,000000] A0000-BFFFF uncachable
[ +0,000000] C0000-CFFFF write-protect
[ +0,000000] D0000-E7FFF uncachable
[ +0,000000] E8000-FFFFF write-protect
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ +0,000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0,000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ +0,000000] e820: BIOS-provided physical RAM map:
[ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ +0,000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bae6cfff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000bae6d000-0x00000000bae73fff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000bae74000-0x00000000bb29ffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000bb2a0000-0x00000000bb89bfff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000bb89c000-0x00000000ca8c9fff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000ca8ca000-0x00000000cadbafff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000cadbb000-0x00000000cadd8fff] ACPI data
[ +0,000000] BIOS-e820: [mem 0x00000000cadd9000-0x00000000cb6edfff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000cb6ee000-0x00000000cbffefff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ +0,000000] NX (Execute Disable) protection: active
[ +0,000000] random: fast init done
[ +0,000000] SMBIOS 2.7 present.
[ +0,000000] DMI: Dell Inc. Inspiron 5437/03X56P, BIOS A09 01/24/2014
[ +0,000000] tsc: Fast TSC calibration using PIT
[ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ +0,000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ +0,000000] MTRR default type: uncachable
[ +0,000000] MTRR fixed ranges enabled:
[ +0,000000] 00000-9FFFF write-back
[ +0,000000] A0000-BFFFF uncachable
[ +0,000000] C0000-CFFFF write-protect
[ +0,000000] D0000-E7FFF uncachable
[ +0,000000] E8000-FFFFF write-protect
[ +0,000000] MTRR variable ranges enabled:
[ +0,000000] 0 base 0000000000 mask 7E00000000 write-back
[ +0,000000] 1 base 0200000000 mask 7FE0000000 write-back
[ +0,000000] 2 base 0220000000 mask 7FF0000000 write-back
[ +0,000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ +0,000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ +0,000000] 5 base 00CE000000 mask 7FFE000000 uncachable
[ +0,000000] 6 base 00CD000000 mask 7FFF000000 uncachable
[ +0,000000] 7 base 022FE00000 mask 7FFFE00000 uncachable
[ +0,000000] 8 disabled
[ +0,000000] 9 disabled
[ +0,000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ +0,000000] total RAM covered: 8142M
[ +0,000000] Found optimal setting for mtrr clean up
[ +0,000000] gran_size: 64K chunk_size: 4M num_reg: 9 lose cover RAM: 0G
[ +0,000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[ +0,000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[ +0,000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffffffffff200a70]
[ +0,000000] Scanning 1 areas for low memory corruption
[ +0,000000] Base memory trampoline at [ffff8e0680097000] 97000 size 24576
[ +0,000000] Using GB pages for direct mapping
[ +0,000000] BRK [0x12d6ba000, 0x12d6bafff] PGTABLE
[ +0,000000] BRK [0x12d6bb000, 0x12d6bbfff] PGTABLE
[ +0,000000] BRK [0x12d6bc000, 0x12d6bcfff] PGTABLE
[ +0,000000] BRK [0x12d6bd000, 0x12d6bdfff] PGTABLE
[ +0,000000] BRK [0x12d6be000, 0x12d6befff] PGTABLE
[ +0,000000] BRK [0x12d6bf000, 0x12d6bffff] PGTABLE
[ +0,000000] BRK [0x12d6c0000, 0x12d6c0fff] PGTABLE
[ +0,000000] BRK [0x12d6c1000, 0x12d6c1fff] PGTABLE
[ +0,000000] BRK [0x12d6c2000, 0x12d6c2fff] PGTABLE
[ +0,000000] BRK [0x12d6c3000, 0x12d6c3fff] PGTABLE
[ +0,000000] BRK [0x12d6c4000, 0x12d6c4fff] PGTABLE
[ +0,000000] BRK [0x12d6c5000, 0x12d6c5fff] PGTABLE
[ +0,000000] RAMDISK: [mem 0x31798000-0x34bc3fff]
[ +0,000000] ACPI: Early table checksum verification disabled
[ +0,000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
[ +0,000000] ACPI: XSDT 0x00000000CADC1098 0000AC (v01 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: FACP 0x00000000CADD1300 00010C (v05 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: DSDT 0x00000000CADC11D0 01012F (v02 DELL WN09 00000000 INTL 20120711)
[ +0,000000] ACPI: FACS 0x00000000CB6E9080 000040
[ +0,000000] ACPI: APIC 0x00000000CADD1410 000072 (v03 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: FPDT 0x00000000CADD1488 000044 (v01 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: ASF! 0x00000000CADD14D0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ +0,000000] ACPI: LPIT 0x00000000CADD1578 00005C (v01 DELL WN09 00000000 AMI. 00000005)
[ +0,000000] ACPI: SSDT 0x00000000CADD15D8 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
[ +0,000000] ACPI: SLIC 0x00000000CADD1800 000176 (v01 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: SSDT 0x00000000CADD1978 0004D6 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ +0,000000] ACPI: SSDT 0x00000000CADD1E50 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ +0,000000] ACPI: MCFG 0x00000000CADD2928 00003C (v01 DELL WN09 01072009 MSFT 00000097)
[ +0,000000] ACPI: HPET 0x00000000CADD2968 000038 (v01 DELL WN09 01072009 AMI. 00000005)
[ +0,000000] ACPI: SSDT 0x00000000CADD29A0 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ +0,000000] ACPI: SSDT 0x00000000CADD2CB8 00355E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ +0,000000] ACPI: SSDT 0x00000000CADD6218 00083E (v01 SgRef SgPch 00001000 INTL 20120711)
[ +0,000000] ACPI: MSDM 0x00000000CADD6A58 000055 (v03 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: SSDT 0x00000000CADD6AB0 0019E4 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ +0,000000] ACPI: CSRT 0x00000000CADD8498 0000C4 (v01 INTL HSWULT-R 00000001 INTL 20100528)
[ +0,000000] ACPI: DMI detected: Dell Inspiron 5437
[ +0,000000] ACPI: Local APIC address 0xfee00000
[ +0,000000] No NUMA configuration found
[ +0,000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[ +0,000000] NODE_DATA(0) allocated [mem 0x22fdd5000-0x22fdfffff]
[ +0,000000] Zone ranges:
[ +0,000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ +0,000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ +0,000000] Normal [mem 0x0000000100000000-0x000000022fdfffff]
[ +0,000000] Device empty
[ +0,000000] Movable zone start for each node
[ +0,000000] Early memory node ranges
[ +0,000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ +0,000000] node 0: [mem 0x0000000000100000-0x00000000bae6cfff]
[ +0,000000] node 0: [mem 0x00000000bae74000-0x00000000bb29ffff]
[ +0,000000] node 0: [mem 0x00000000bb89c000-0x00000000ca8c9fff]
[ +0,000000] node 0: [mem 0x00000000cbfff000-0x00000000cbffffff]
[ +0,000000] node 0: [mem 0x0000000100000000-0x000000022fdfffff]
[ +0,000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
[ +0,000000] On node 0 totalpages: 2072676
[ +0,000000] DMA zone: 64 pages used for memmap
[ +0,000000] DMA zone: 21 pages reserved
[ +0,000000] DMA zone: 3996 pages, LIFO batch:0
[ +0,000000] DMA32 zone: 12876 pages used for memmap
[ +0,000000] DMA32 zone: 824008 pages, LIFO batch:31
[ +0,000000] Normal zone: 19448 pages used for memmap
[ +0,000000] Normal zone: 1244672 pages, LIFO batch:31
[ +0,000000] Reserving Intel graphics memory at 0x00000000cd200000-0x00000000cf1fffff
[ +0,000000] ACPI: PM-Timer IO Port: 0x1808
[ +0,000000] ACPI: Local APIC address 0xfee00000
[ +0,000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ +0,000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ +0,000000] ACPI: IRQ0 used by override.
[ +0,000000] ACPI: IRQ9 used by override.
[ +0,000000] Using ACPI (MADT) for SMP configuration information
[ +0,000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ +0,000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ +0,000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ +0,000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ +0,000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ +0,000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ +0,000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xbae6d000-0xbae73fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xbb2a0000-0xbb89bfff]
[ +0,000000] PM: Registered nosave memory: [mem 0xca8ca000-0xcadbafff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcadbb000-0xcadd8fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcadd9000-0xcb6edfff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcb6ee000-0xcbffefff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ +0,000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ +0,000000] Booting paravirtualized kernel on bare hardware
[ +0,000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ +0,000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ +0,000000] percpu: Embedded 45 pages/cpu @ffff8e08afa00000 s146904 r8192 d29224 u524288
[ +0,000000] pcpu-alloc: s146904 r8192 d29224 u524288 alloc=1*2097152
[ +0,000000] pcpu-alloc: [0] 0 1 2 3
[ +0,000000] Built 1 zonelists, mobility grouping on. Total pages: 2040267
[ +0,000000] Policy zone: Normal
[ +0,000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ +0,000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ +0,000000] Calgary: detecting Calgary via BIOS EBDA area
[ +0,000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ +0,000000] Memory: 8007672K/8290704K available (12300K kernel code, 2496K rwdata, 4132K rodata, 2352K init, 2380K bss, 283032K reserved, 0K cma-reserved)
[ +0,000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ +0,000000] Kernel/User page tables isolation: enabled
[ +0,000000] ftrace: allocating 38409 entries in 151 pages
[ +0,000000] Hierarchical RCU implementation.
[ +0,000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ +0,000000] Tasks RCU enabled.
[ +0,000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ +0,000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ +0,000000] Console: colour dummy device 80x25
[ +0,000000] console [tty0] enabled
[ +0,000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ +0,000000] hpet clockevent registered
[ +0,000000] tsc: Fast TSC calibration using PIT
[ +0,000000] tsc: Detected 1795.900 MHz processor
[ +0,000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.80 BogoMIPS (lpj=7183600)
[ +0,000000] pid_max: default: 32768 minimum: 301
[ +0,000000] ACPI: Core revision 20170728
[ +0,016187] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ +0,000023] Security Framework initialized
[ +0,000001] Yama: becoming mindful.
[ +0,000003] SELinux: Disabled at boot.
[ +0,000001] AppArmor: AppArmor disabled by boot time parameter
[ +0,001001] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ +0,000489] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ +0,000025] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ +0,000015] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ +0,000162] CPU: Physical Processor ID: 0
[ +0,000000] CPU: Processor Core ID: 0
[ +0,000005] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ +0,000000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ +0,000004] mce: CPU supports 7 MCE banks
[ +0,000007] CPU0: Thermal monitoring enabled (TM1)
[ +0,000009] process: using mwait in idle threads
[ +0,000002] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ +0,000001] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ +0,000563] Freeing SMP alternatives memory: 36K
[ +0,001553] smpboot: Max logical packages: 2
[ +0,000476] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ +0,041165] TSC deadline timer enabled
[ +0,000001] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ +0,000044] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ +0,000035] ... version: 3
[ +0,000000] ... bit width: 48
[ +0,000001] ... generic registers: 4
[ +0,000000] ... value mask: 0000ffffffffffff
[ +0,000001] ... max period: 00007fffffffffff
[ +0,000000] ... fixed-purpose events: 3
[ +0,000000] ... event mask: 000000070000000f
[ +0,000024] Hierarchical SRCU implementation.
[ +0,000793] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ +0,000010] smp: Bringing up secondary CPUs ...
[ +0,000049] x86: Booting SMP configuration:
[ +0,000001] .... node #0, CPUs: #1 #2 #3
[ +0,002803] smp: Brought up 1 node, 4 CPUs
[ +0,000000] smpboot: Total of 4 processors activated (14367.20 BogoMIPS)
[ +0,002776] devtmpfs: initialized
[ +0,000000] x86/mm: Memory block size: 128MB
[ +0,000279] evm: security.selinux
[ +0,000000] evm: security.SMACK64
[ +0,000001] evm: security.SMACK64EXEC
[ +0,000000] evm: security.SMACK64TRANSMUTE
[ +0,000000] evm: security.SMACK64MMAP
[ +0,000001] evm: security.ima
[ +0,000000] evm: security.capability
[ +0,000012] PM: Registering ACPI NVS region [mem 0xbae6d000-0xbae73fff] (28672 bytes)
[ +0,000000] PM: Registering ACPI NVS region [mem 0xcadd9000-0xcb6edfff] (9523200 bytes)
[ +0,000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ +0,000000] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ +0,000000] pinctrl core: initialized pinctrl subsystem
[ +0,000000] RTC time: 19:07:12, date: 03/21/18
[ +0,000000] NET: Registered protocol family 16
[ +0,000000] cpuidle: using governor ladder
[ +0,000000] cpuidle: using governor menu
[ +0,000000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ +0,000000] ACPI: bus type PCI registered
[ +0,000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ +0,000000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ +0,000000] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ +0,000000] PCI: Using configuration type 1 for base access
[ +0,000000] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ +0,000401] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ +0,000000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ +0,000000] ACPI: Added _OSI(Module Device)
[ +0,000000] ACPI: Added _OSI(Processor Device)
[ +0,000000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ +0,000000] ACPI: Added _OSI(Processor Aggregator Device)
[ +0,000000] ACPI: Deleted _OSI(Windows 2012)
[ +0,000000] ACPI: Executed 1 blocks of module-level executable AML code
[ +0,007337] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ +0,006165] ACPI: Dynamic OEM Table Load:
[ +0,000005] ACPI: SSDT 0xFFFF8E08A5D32C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ +0,000442] ACPI: Dynamic OEM Table Load:
[ +0,000004] ACPI: SSDT 0xFFFF8E08A5C09800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ +0,000485] ACPI: Dynamic OEM Table Load:
[ +0,000003] ACPI: SSDT 0xFFFF8E08A5D2A400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ +0,001300] ACPI: Interpreter enabled
[ +0,000029] ACPI: (supports S0 S3 S4 S5)
[ +0,000001] ACPI: Using IOAPIC for interrupt routing
[ +0,000026] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ +0,000349] ACPI: Enabled 6 GPEs in block 00 to 7F
[ +0,002035] ACPI: Power Resource [PC05] (on)
[ +0,014134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ +0,000004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ +0,000201] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ +0,000166] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ +0,000001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0,000490] PCI host bridge to bus 0000:00
[ +0,000002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ +0,000001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ +0,000000] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ +0,000000] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [bus 00-3e]
[ +0,000007] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ +0,000096] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ +0,000009] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ +0,000004] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ +0,000004] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ +0,000085] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ +0,000008] pci 0000:00:03.0: reg 0x10: [mem 0xf7a04000-0xf7a07fff 64bit]
[ +0,000106] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ +0,000018] pci 0000:00:16.0: reg 0x10: [mem 0xf7a0d000-0xf7a0d01f 64bit]
[ +0,000057] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ +0,000080] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ +0,000015] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a00000-0xf7a03fff 64bit]
[ +0,000054] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ +0,000074] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ +0,000054] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ +0,000123] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ +0,000057] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ +0,000121] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ +0,000056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ +0,000118] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ +0,000057] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ +0,000122] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ +0,000019] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a0b000-0xf7a0b3ff]
[ +0,000072] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ +0,000079] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ +0,000171] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ +0,000012] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ +0,000005] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ +0,000005] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ +0,000005] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ +0,000005] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ +0,000005] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a0a000-0xf7a0a7ff]
[ +0,000027] pci 0000:00:1f.2: PME# supported from D3hot
[ +0,000069] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ +0,000013] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a09000-0xf7a090ff 64bit]
[ +0,000015] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ +0,000134] acpiphp: Slot [1] registered
[ +0,000004] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ +0,000060] pci 0000:06:00.0: [168c:0036] type 00 class 0x028000
[ +0,000030] pci 0000:06:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[ +0,000046] pci 0000:06:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[ +0,000064] pci 0000:06:00.0: supports D1 D2
[ +0,000001] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0,011755] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ +0,000005] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ +0,000087] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[ +0,000030] pci 0000:07:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ +0,000028] pci 0000:07:00.0: reg 0x18: [mem 0xf7804000-0xf7804fff 64bit]
[ +0,000017] pci 0000:07:00.0: reg 0x20: [mem 0xf7800000-0xf7803fff 64bit]
[ +0,000098] pci 0000:07:00.0: supports D1 D2
[ +0,000001] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0,015729] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ +0,000003] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ +0,000003] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ +0,000076] pci 0000:08:00.0: [10de:0fe4] type 00 class 0x030200
[ +0,000024] pci 0000:08:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ +0,000014] pci 0000:08:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ +0,000013] pci 0000:08:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ +0,000009] pci 0000:08:00.0: reg 0x24: [io 0xd000-0xd07f]
[ +0,000009] pci 0000:08:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ +0,000007] pci 0000:08:00.0: enabling Extended Tags
[ +0,011835] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ +0,000003] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ +0,000003] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ +0,000004] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ +0,001323] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ +0,000083] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ +0,000083] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ +0,000065] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ +0,000064] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000065] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ +0,000063] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ +0,000388] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ +0,000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ +0,000000] pci 0000:00:02.0: vgaarb: bridge control possible
[ +0,000000] vgaarb: loaded
[ +0,000000] SCSI subsystem initialized
[ +0,000000] libata version 3.00 loaded.
[ +0,000000] ACPI: bus type USB registered
[ +0,000000] usbcore: registered new interface driver usbfs
[ +0,000000] usbcore: registered new interface driver hub
[ +0,000000] usbcore: registered new device driver usb
[ +0,000000] EDAC MC: Ver: 3.0.0
[ +0,000000] PCI: Using ACPI for IRQ routing
[ +0,000000] PCI: pci_cache_line_size set to 64 bytes
[ +0,000000] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ +0,000000] e820: reserve RAM buffer [mem 0xbae6d000-0xbbffffff]
[ +0,000000] e820: reserve RAM buffer [mem 0xbb2a0000-0xbbffffff]
[ +0,000000] e820: reserve RAM buffer [mem 0xca8ca000-0xcbffffff]
[ +0,000000] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[ +0,000000] NetLabel: Initializing
[ +0,000000] NetLabel: domain hash size = 128
[ +0,000000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ +0,000000] NetLabel: unlabeled traffic allowed by default
[ +0,000000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ +0,000000] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ +0,002788] clocksource: Switched to clocksource hpet
[ +0,007217] VFS: Disk quotas dquot_6.6.0
[ +0,000016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ +0,000054] pnp: PnP ACPI init
[ +0,000100] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ +0,000004] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ +0,000305] system 00:01: [io 0x0680-0x069f] has been reserved
[ +0,000001] system 00:01: [io 0xffff] has been reserved
[ +0,000001] system 00:01: [io 0xffff] has been reserved
[ +0,000001] system 00:01: [io 0xffff] has been reserved
[ +0,000001] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ +0,000001] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ +0,000001] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ +0,000001] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ +0,000000] system 00:01: [io 0x1800-0x18fe] has been reserved
[ +0,000001] system 00:01: [io 0x164e-0x164f] has been reserved
[ +0,000003] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000018] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ +0,000044] system 00:03: [io 0x1854-0x1857] has been reserved
[ +0,000002] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ +0,000036] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ +0,000002] system 00:04: [mem 0xfe800000-0xfe802fff] has been reserved
[ +0,000002] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000021] pnp 00:05: Plug and Play ACPI device, IDs DLL05f3 SYN0600 SYN0002 PNP0f13 (active)
[ +0,000022] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ +0,000409] system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe10c000-0xfe10cfff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe112000-0xfe112fff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe111000-0xfe111007] has been reserved
[ +0,000001] system 00:07: [mem 0xfe111014-0xfe111fff] has been reserved
[ +0,000002] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000344] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ +0,000001] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ +0,000000] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ +0,000002] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ +0,000001] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ +0,000001] system 00:08: [mem 0xf7fee000-0xf7feefff] has been reserved
[ +0,000001] system 00:08: [mem 0xf7fd0000-0xf7fdffff] has been reserved
[ +0,000002] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000250] pnp: PnP ACPI: found 9 devices
[ +0,005652] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ +0,000010] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ +0,000002] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ +0,000001] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ +0,000021] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[ +0,000006] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[ +0,000001] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ +0,000002] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ +0,000002] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ +0,000003] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
[ +0,000002] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[ +0,000004] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ +0,000003] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ +0,000005] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ +0,000002] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ +0,000003] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ +0,000005] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ +0,000001] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ +0,000003] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ +0,000002] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ +0,000005] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ +0,000001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ +0,000000] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ +0,000001] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ +0,000001] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ +0,000001] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ +0,000001] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ +0,000001] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ +0,000000] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ +0,000001] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[ +0,000001] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ +0,000001] pci_bus 0000:04: resource 1 [mem 0xcf200000-0xcf3fffff]
[ +0,000001] pci_bus 0000:04: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[ +0,000001] pci_bus 0000:06: resource 1 [mem 0xf7900000-0xf79fffff]
[ +0,000001] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ +0,000001] pci_bus 0000:07: resource 1 [mem 0xf7800000-0xf78fffff]
[ +0,000000] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ +0,000001] pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf70fffff]
[ +0,000001] pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ +0,000134] NET: Registered protocol family 2
[ +0,000150] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ +0,000091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ +0,000100] TCP: Hash tables configured (established 65536 bind 65536)
[ +0,000024] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ +0,000019] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ +0,000041] NET: Registered protocol family 1
[ +0,000010] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ +0,023943] PCI: CLS 64 bytes, default 64
[ +0,000035] Unpacking initramfs...
[ +0,734915] Freeing initrd memory: 53424K
[ +0,000003] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ +0,000003] software IO TLB [mem 0xc68ca000-0xca8ca000] (64MB) mapped at [ffff8e07468ca000-ffff8e074a8c9fff]
[ +0,000183] Scanning for low memory corruption every 60 seconds
[ +0,000217] audit: initializing netlink subsys (disabled)
[ +0,000030] audit: type=2000 audit(1521659232.920:1): state=initialized audit_enabled=0 res=1
[ +0,000277] Initialise system trusted keyrings
[ +0,000007] Key type blacklist registered
[ +0,000025] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ +0,000806] zbud: loaded
[ +0,000282] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ +0,000094] fuse init (API version 7.26)
[ +0,000826] Key type asymmetric registered
[ +0,000001] Asymmetric key parser 'x509' registered
[ +0,000020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ +0,000022] io scheduler noop registered
[ +0,000001] io scheduler deadline registered
[ +0,000028] io scheduler cfq registered (default)
[ +0,000532] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ +0,000000] vesafb: scrolling: redraw
[ +0,000001] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ +0,000008] vesafb: framebuffer at 0xd0000000, mapped to 0xffffb845c1800000, using 4160k, total 4160k
[ +0,075034] Console: switching to colour frame buffer device 170x48
[ +0,074761] fb0: VESA VGA frame buffer device
[ +0,000011] intel_idle: MWAIT substates: 0x11142120
[ +0,000001] intel_idle: v0.4.1 model 0x45
[ +0,000134] intel_idle: lapic_timer_reliable_states 0xffffffff
[ +0,000109] ACPI: AC Adapter [AC] (on-line)
[ +0,001825] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ +0,000987] ACPI: Lid Switch [LID0]
[ +0,000025] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ +0,000007] ACPI: Power Button [PWRB]
[ +0,000020] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ +0,000005] ACPI: Sleep Button [SBTN]
[ +0,000020] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ +0,000014] ACPI: Power Button [PWRF]
[ +0,010486] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ +0,002004] thermal LNXTHERM:00: registered as thermal_zone0
[ +0,000001] ACPI: Thermal Zone [THM] (39 C)
[ +0,000123] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ +0,001098] Linux agpgart interface v0.103
[ +0,001012] loop: module loaded
[ +0,000112] libphy: Fixed MDIO Bus: probed
[ +0,000000] tun: Universal TUN/TAP device driver, 1.6
[ +0,000022] PPP generic driver version 2.4.2
[ +0,000028] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ +0,000001] ehci-pci: EHCI PCI platform driver
[ +0,000101] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ +0,000004] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ +0,000008] ehci-pci 0000:00:1d.0: debug port 2
[ +0,003894] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ +0,000009] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a0b000
[ +0,013705] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ +0,000043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ +0,000001] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0,000002] usb usb1: Product: EHCI Host Controller
[ +0,000001] usb usb1: Manufacturer: Linux 4.14.13-041413-generic ehci_hcd
[ +0,000001] usb usb1: SerialNumber: 0000:00:1d.0
[ +0,000117] hub 1-0:1.0: USB hub found
[ +0,000005] hub 1-0:1.0: 2 ports detected
[ +0,000151] ehci-platform: EHCI generic platform driver
[ +0,000009] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ +0,000003] ohci-pci: OHCI PCI platform driver
[ +0,000007] ohci-platform: OHCI generic platform driver
[ +0,000006] uhci_hcd: USB Universal Host Controller Interface driver
[ +0,000051] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ +0,004533] serio: i8042 KBD port at 0x60,0x64 irq 1
[ +0,000003] serio: i8042 AUX port at 0x60,0x64 irq 12
[ +0,000082] mousedev: PS/2 mouse device common for all mice
[ +0,000230] rtc_cmos 00:02: RTC can wake from S4
[ +0,000127] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ +0,000021] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ +0,000004] i2c /dev entries driver
[ +0,000029] device-mapper: uevent: version 1.0.3
[ +0,000063] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ +0,000005] intel_pstate: Intel P-state driver initializing
[ +0,000194] ledtrig-cpu: registered to indicate activity on CPUs
[ +0,000293] NET: Registered protocol family 10
[ +0,003925] Segment Routing with IPv6
[ +0,000014] NET: Registered protocol family 17
[ +0,000036] Key type dns_resolver registered
[ +0,000164] RAS: Correctable Errors collector initialized.
[ +0,000022] microcode: sig=0x40651, pf=0x40, revision=0x20
[ +0,000032] microcode: Microcode Update Driver: v2.2.
[ +0,000007] sched_clock: Marking stable (1126207613, 0)->(1136241228, -10033615)
[ +0,000135] registered taskstats version 1
[ +0,000010] Loading compiled-in X.509 certificates
[ +0,002421] Loaded X.509 cert 'Build time autogenerated kernel key: 41ad474c598f37619c1959d7c7ea6bf795548be3'
[ +0,000019] zswap: loaded using pool lzo/zbud
[ +0,003802] ACPI: Battery Slot [BAT0] (battery present)
[ +0,000205] Key type big_key registered
[ +0,000004] Key type trusted registered
[ +0,001693] Key type encrypted registered
[ +0,000002] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ +0,000015] evm: HMAC attrs: 0x1
[ +0,000425] Magic number: 10:639:142
[ +0,000046] acpi device:13: hash matches
[ +0,000051] rtc_cmos 00:02: setting system clock to 2018-03-21 19:07:13 UTC (1521659233)
[ +0,000034] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ +0,000000] EDD information not available.
[ +0,001900] Freeing unused kernel memory: 2352K
[ +0,000000] Write protecting the kernel read-only data: 20480k
[ +0,000412] Freeing unused kernel memory: 2008K
[ +0,003508] Freeing unused kernel memory: 2012K
[ +0,004201] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ +0,000001] x86/mm: Checking user space page tables
[ +0,004130] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ +0,004573] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ +0,045054] hidraw: raw HID events driver (C) Jiri Kosina
[ +0,013626] sdhci: Secure Digital Host Controller Interface driver
[ +0,000001] sdhci: Copyright(c) Pierre Ossman
[ +0,036063] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ +0,000004] ahci 0000:00:1f.2: version 3.0
[ +0,000002] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[ +0,010284] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ +0,000003] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ +0,000564] scsi host0: ahci
[ +0,000077] scsi host1: ahci
[ +0,000073] scsi host2: ahci
[ +0,000068] scsi host3: ahci
[ +0,000040] ata1: SATA max UDMA/133 abar m2048@0xf7a0a000 port 0xf7a0a100 irq 40
[ +0,000001] ata2: SATA max UDMA/133 abar m2048@0xf7a0a000 port 0xf7a0a180 irq 40
[ +0,000001] ata3: DUMMY
[ +0,000001] ata4: DUMMY
[ +0,001229] r8169 0000:07:00.0 eth0: RTL8106e at 0xffffb845c0c7d000, a4:1f:72:f8:a4:1a, XID 10900800 IRQ 41
[ +0,000666] r8169 0000:07:00.0 enp7s0: renamed from eth0
[ +0,020393] [drm] Memory usable by graphics device = 2048M
[ +0,000002] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ +0,000000] fb: switching to inteldrmfb from VESA VGA
[ +0,000016] Console: switching to colour dummy device 80x25
[ +0,000076] [drm] Replacing VGA console driver
[ +0,006048] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ +0,000001] [drm] Driver supports precise vblank timestamp query.
[ +0,002072] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ +0,012034] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ +0,000117] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ +0,001115] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ +0,000008] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
[ +0,000012] No Local Variables are initialized for Method [_BCL]
[ +0,000001] No Arguments are initialized for method [_BCL]
[ +0,000002] ACPI Error: Method parse/execution failed \_SB.PCI0.RP05.PEGP.DD02._BCL, AE_NOT_FOUND (20170728/psparse-550)
[ +0,000232] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:00/input/input7
[ +0,001363] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ +0,000088] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ +0,017210] fbcon: inteldrmfb (fb0) is primary device
[ +0,129726] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ +0,123324] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ +0,000017] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0,002805] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A100, max UDMA/100
[ +0,003506] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
[ +0,000003] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ +0,000022] ata2.00: configured for UDMA/100
[ +0,006349] ata1.00: configured for UDMA/133
[ +0,000288] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[ +0,000361] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ +0,000010] sd 0:0:0:0: [sda] Write Protect is off
[ +0,000002] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ +0,000001] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ +0,000014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ +0,003193] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A100 PQ: 0 ANSI: 5
[ +0,008055] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754]
[ +0,008373] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ +0,000001] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0,000268] hub 1-1:1.0: USB hub found
[ +0,000082] hub 1-1:1.0: 8 ports detected
[ +0,010248] sda: sda1 sda2 < sda5 >
[ +0,000481] sd 0:0:0:0: [sda] Attached SCSI disk
[ +0,000058] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ +0,000001] cdrom: Uniform CD-ROM driver Revision: 3.20
[ +0,000130] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ +0,000081] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ +0,008443] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..]
[ +0,000007] psmouse serio1: synaptics: Your touchpad (PNP: DLL05f3 SYN0600 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used,
[ +0,055513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x0, board id: 2382, fw id: 1238635
[ +0,035640] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ +0,176707] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ +0,052006] tsc: Refined TSC clocksource calibration: 1795.842 MHz
[ +0,000010] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e2d1a93ac, max_idle_ns: 440795217409 ns
[ +0,058104] usb 1-1.3: New USB device found, idVendor=3938, idProduct=1031
[ +0,000002] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ +0,000001] usb 1-1.3: Product: 2.4G Wireless Mouse
[ +0,000001] usb 1-1.3: Manufacturer: MOSART Semi.
[ +0,005318] usbcore: registered new interface driver usbhid
[ +0,000001] usbhid: USB HID core driver
[ +0,001851] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:3938:1031.0001/input/input9
[ +0,000132] hid-generic 0003:3938:1031.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:1d.0-1.3/input0
[ +0,070576] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ +0,173458] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=64af
[ +0,000002] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ +0,000002] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
[ +0,000001] usb 1-1.5: Manufacturer: CN0Y3PX872487394BDPZA01
[ +0,090507] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[ +0,109274] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036
[ +0,000002] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0,004784] Console: switching to colour frame buffer device 170x48
[ +0,026450] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ +0,047527] usb 1-1.7: new full-speed USB device number 6 using ehci-pci
[ +0,110402] usb 1-1.7: New USB device found, idVendor=04f3, idProduct=003d
[ +0,000003] usb 1-1.7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ +0,000001] usb 1-1.7: Product: Touchscreen
[ +0,000001] usb 1-1.7: Manufacturer: ELAN
[ +0,257524] raid6: sse2x1 gen() 10419 MB/s
[ +0,068000] raid6: sse2x1 xor() 7458 MB/s
[ +0,067996] raid6: sse2x2 gen() 12553 MB/s
[ +0,068001] raid6: sse2x2 xor() 8171 MB/s
[ +0,068000] raid6: sse2x4 gen() 14806 MB/s
[ +0,068002] raid6: sse2x4 xor() 9244 MB/s
[ +0,067999] raid6: avx2x1 gen() 20495 MB/s
[ +0,067998] raid6: avx2x1 xor() 14041 MB/s
[ +0,068001] raid6: avx2x2 gen() 24193 MB/s
[ +0,068000] raid6: avx2x2 xor() 14876 MB/s
[ +0,068001] raid6: avx2x4 gen() 27087 MB/s
[ +0,067999] raid6: avx2x4 xor() 17725 MB/s
[ +0,000000] raid6: using algorithm avx2x4 gen() 27087 MB/s
[ +0,000001] raid6: .... xor() 17725 MB/s, rmw enabled
[ +0,000000] raid6: using avx2x2 recovery algorithm
[ +0,000081] clocksource: Switched to clocksource tsc
[ +0,000885] xor: automatically using best checksumming function avx
[ +0,000819] async_tx: api initialized (async)
[ +5,353521] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ +0,998671] random: crng init done
[ +0,648626] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +
[ +0,017481] systemd[1]: Detected architecture x86-64.
[ +0,000131] systemd[1]: Set hostname to <eurico-Inspiron-5437>.
[ +3,191607] systemd[1]: Listening on Journal Socket (/dev/log).
[ +0,000077] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ +0,000025] systemd[1]: Listening on udev Control Socket.
[ +0,000116] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ +0,000009] systemd[1]: Reached target Remote File Systems (Pre).
[ +0,000029] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ +0,000006] systemd[1]: Reached target Encrypted Volumes.
[ +1,880648] lp: driver loaded but no devices found
[ +0,248445] ppdev: user-space parallel port driver
[ +1,578476] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ +0,331071] systemd-journald[382]: Received request to flush runtime journal from PID 1
[ +0,622429] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ +1,051408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ +1,643651] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ +0,113987] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ +0,000054] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ +0,000054] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ +0,000047] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ +0,000046] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ +0,001703] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3223: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ +0,000002] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ +0,000002] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ +0,000001] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ +0,000001] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ +0,000002] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
[ +0,000002] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
[ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ +0,030738] snd_hda_codec_realtek hdaudioC1D0: Failed to find dell wmi symbol dell_micmute_led_set
[ +0,392592] ath: phy0: WB335 1-ANT card detected
[ +0,000001] ath: phy0: Set BT/WLAN RX diversity capability
[ +0,006676] ath: phy0: Enable LNA combining
[ +0,001091] ath: phy0: ASPM enabled: 0x42
[ +0,000001] ath: EEPROM regdomain: 0x60
[ +0,000000] ath: EEPROM indicates we should expect a direct regpair map
[ +0,000002] ath: Country alpha2 being used: 00
[ +0,000000] ath: Regpair used: 0x60
[ +0,045448] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ +0,000488] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb845c1580000, irq=18
[ +0,280506] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.7/1-1.7:1.0/0003:04F3:003D.0002/input/input15
[ +0,000096] hid-multitouch 0003:04F3:003D.0002: input,hiddev1,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.7/input0
[ +0,111802] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ +0,000001] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ +0,000001] RAPL PMU: hw unit of domain package 2^-14 Joules
[ +0,000001] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ +0,000001] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ +0,031929] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ +0,018656] media: Linux media interface: v0.10
[ +0,034254] Linux video capture interface: v2.00
[ +0,017987] Bluetooth: Core ver 2.22
[ +0,000018] NET: Registered protocol family 31
[ +0,000001] Bluetooth: HCI device and connection manager initialized
[ +0,000003] Bluetooth: HCI socket layer initialized
[ +0,000001] Bluetooth: L2CAP socket layer initialized
[ +0,000009] Bluetooth: SCO socket layer initialized
[ +0,155965] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64af)
[ +0,014479] usbcore: registered new interface driver btusb
[ +0,026093] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[ +0,000003] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[ +0,000002] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[ +0,000002] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[ +0,000092] input: Laptop_Integrated_Webcam_HD: In as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input21
[ +0,000084] usbcore: registered new interface driver uvcvideo
[ +0,000001] USB Video Class driver (1.1.1)
[ +0,120688] AVX2 version of gcm_enc/dec engaged.
[ +0,000001] AES CTR mode by8 optimization enabled
[ +0,252608] usbcore: registered new interface driver ath3k
[ +0,241177] usb 1-1.6: USB disconnect, device number 5
[ +0,224393] usb 1-1.6: new full-speed USB device number 7 using ehci-pci
[ +0,395337] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ +0,418876] intel_rapl: Found RAPL domain package
[ +0,000001] intel_rapl: Found RAPL domain core
[ +0,000001] intel_rapl: Found RAPL domain uncore
[ +0,000000] intel_rapl: Found RAPL domain dram
[ +0,000002] intel_rapl: RAPL package 0 domain package locked by BIOS
[ +0,000004] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ +0,865547] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1
[ +0,000055] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input22
[ +0,403346] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[ +0,074155] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[ +0,017412] Creating 1 MTD partitions on "intel-spi":
[ +0,000004] 0x000000000000-0x000000800000 : "BIOS"
[ +2,346911] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ +0,044716] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ +0,553654] usb 1-1.6: device descriptor read/64, error -110
[ +1,448498] Adding 8290300k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:8290300k FS
[ +3,952748] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036
[ +0,000002] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +10,393392] new mount options do not match the existing superblock, will be ignored
[ +4,596727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ +0,000002] Bluetooth: BNEP filters: protocol multicast
[ +0,000003] Bluetooth: BNEP socket layer initialized
[Mar21 16:08] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ +0,012266] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ +0,002381] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[ +0,415979] r8169 0000:07:00.0 enp7s0: link down
[ +0,000063] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[ +3,121503] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ +7,734062] Guest personality initialized and is inactive
[ +0,000046] VMCI host device registered (name=vmci, major=10, minor=55)
[ +0,000000] Initialized host personality
[ +0,615026] NET: Registered protocol family 40
[ +3,818176] NET: Registered protocol family 4
[ +0,285886] NET: Registered protocol family 5
[ +1,451804] ip_tables: (C) 2000-2006 Netfilter Core Team
[ +1,006828] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ +0,796878] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[Mar21 16:09] Bridge firewalling registered
[ +2,393912] Initializing XFRM netlink socket
[ +0,215556] Bluetooth: RFCOMM TTY layer initialized
[ +0,000005] Bluetooth: RFCOMM socket layer initialized
[ +0,000004] Bluetooth: RFCOMM ver 1.11
[ +0,247747] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ +8,440097] wlp6s0: authenticate with 64:12:69:27:51:fb
[ +0,011870] wlp6s0: send auth to 64:12:69:27:51:fb (try 1/3)
[ +0,031543] wlp6s0: authenticated
[ +0,001141] wlp6s0: associate with 64:12:69:27:51:fb (try 1/3)
[ +0,008280] wlp6s0: RX AssocResp from 64:12:69:27:51:fb (capab=0x1411 status=0 aid=3)
[ +0,000100] wlp6s0: associated
[ +0,168589] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[Mar21 16:10] wlp6s0: authenticate with 64:12:69:27:51:fb
[ +0,017015] wlp6s0: send auth to 64:12:69:27:51:fb (try 1/3)
[ +0,003028] wlp6s0: authenticated
[ +0,006980] wlp6s0: associate with 64:12:69:27:51:fb (try 1/3)
[ +0,060419] wlp6s0: RX AssocResp from 64:12:69:27:51:fb (capab=0x1411 status=0 aid=3)
[ +0,000097] wlp6s0: associated
(END)



Eurico Saldanha Neto

patrickpcs
(usa Nenhuma)

Enviado em 22/03/2018 - 07:02h

Separei o que eu achei mais interessante para ajudar os demais colegas a analisarem;

[ +5,353521] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 



[ +0,998671] random: crng init done

[ +3,191607] systemd[1]: Listening on Journal Socket (/dev/log).

[ +1,880648] lp: driver loaded but no devices found

[ +1,578476] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro

[ +1,051408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ +1,643651] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])







[ +0,252608] usbcore: registered new interface driver ath3k

[ +0,241177] usb 1-1.6: USB disconnect, device number 5

[ +0,224393] usb 1-1.6: new full-speed USB device number 7 using ehci-pci

[ +0,395337] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)

[ +0,418876] intel_rapl: Found RAPL domain package





[ +0,865547] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1



[ +2,346911] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem







[ +0,553654] usb 1-1.6: device descriptor read/64, error -110

[ +1,448498] Adding 8290300k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:8290300k FS

[ +3,952748] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036

[ +10,393392] new mount options do not match the existing superblock, will be ignored

[ +4,596727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3





[ +8,440097] wlp6s0: authenticate with 64:12:69:27:51:fb

[ +0,011870] wlp6s0: send auth to 64:12:69:27:51:fb (try 1/3)

[ +0,031543] wlp6s0: authenticated

[ +0,001141] wlp6s0: associate with 64:12:69:27:51:fb (try 1/3)

[ +0,008280] wlp6s0: RX AssocResp from 64:12:69:27:51:fb (capab=0x1411 status=0 aid=3)

[ +0,000100] wlp6s0: associated

[ +0,168589] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready

[Mar21 16:10] wlp6s0: authenticate with 64:12:69:27:51:fb

[ +0,017015] wlp6s0: send auth to 64:12:69:27:51:fb (try 1/3)

[ +0,003028] wlp6s0: authenticated

[ +0,006980] wlp6s0: associate with 64:12:69:27:51:fb (try 1/3)

[ +0,060419] wlp6s0: RX AssocResp from 64:12:69:27:51:fb (capab=0x1411 status=0 aid=3)

[ +0,000097] wlp6s0: associated

(END) 

Agora irei expor minha opiniao...
[ +5,353521] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ +1,578476] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ +2,346911] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ +1,448498] Adding 8290300k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:8290300k FS
[ +10,393392] new mount options do not match the existing superblock, will be ignored

A performance do seu disco nao me parece boa nao. Esta usando LVM por acaso? Descreva um pouco melhor como esta instalado o seu sistema, use o comando lsblk por exemplo. E veja o status SMART do seu HD. Esse problema de performance em disco pode ser o que esta afetando o restante....




[ +0,241177] usb 1-1.6: USB disconnect, device number 5
[ +0,224393] usb 1-1.6: new full-speed USB device number 7 using ehci-pci
[ +0,553654] usb 1-1.6: device descriptor read/64, error -110
[ +3,952748] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036

Voce desconectou/esbarrou ou algo do tipo em algum dispositivo usb durante o boot do sistema? pois parece que temos algo estranho como mal contato.
Estas usando uma placa wifi usb? E tambem um mouse sem fio? pelo que eu vi aqui...
[ +0,058104] usb 1-1.3: New USB device found, idVendor=3938, idProduct=1031
[ +0,000002] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ +0,000001] usb 1-1.3: Product: 2.4G Wireless Mouse
[ +0,000001] usb 1-1.3: Manufacturer: MOSART Semi.

Wifi usb a 2.4 Ghz? na mesma frequencia do mouse ligado proximo ao mouse/receptor ....pode explicar um pouco o que vem a seguir...
[ +8,440097] wlp6s0: authenticate with 64:12:69:27:51:fb
[ +0,011870] wlp6s0: send auth to 64:12:69:27:51:fb (try 1/3)
[ +0,031543] wlp6s0: authenticated
[ +0,001141] wlp6s0: associate with 64:12:69:27:51:fb (try 1/3)
[ +0,008280] wlp6s0: RX AssocResp from 64:12:69:27:51:fb (capab=0x1411 status=0 aid=3)
[ +0,000100] wlp6s0: associated
[ +0,168589] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[Mar21 16:10] wlp6s0: authenticate with 64:12:69:27:51:fb
[ +0,017015] wlp6s0: send auth to 64:12:69:27:51:fb (try 1/3)
[ +0,003028] wlp6s0: authenticated
[ +0,006980] wlp6s0: associate with 64:12:69:27:51:fb (try 1/3)
[ +0,060419] wlp6s0: RX AssocResp from 64:12:69:27:51:fb (capab=0x1411 status=0 aid=3)
[ +0,000097] wlp6s0: associated

Seu wifi levou muito tempo (8s) para se conectar e logo em seguida a conexao cai e reconecta.... Bem, pode ser problema de performance com esse wifi usb que voce esta usando ou simplesmente existem muitos dispositivos operando a 2.4Ghz proximo de voce. O roteador wifi tambem pode ser um vilao.

o meu leva so 3s e nao cai. (so pra comparacao)
[ +0.052058] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ +3.206493] wlp3s0: authenticate with ee:ee:ee:ff:ff:ff
[ +0.018393] wlp3s0: send auth to ee:ee:ee:ff:ff:ff (try 1/3)
[ +0.002114] wlp3s0: authenticated
[ +0.004826] wlp3s0: associate with ee:ee:ee:ff:ff:ff (try 1/3)
[ +0.003670] wlp3s0: RX AssocResp from ee:ee:ee:ff:ff:ff (capab=0x411 status=0 aid=1)
[ +0.000095] wlp3s0: associated
[ +0.000010] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready




Minha sugestao;
Desconecte todos esses dispositivos USB e realize o boot normalmente para voce perceber o quanto afeta o seu tempo de boot.
Voce tem que ver com urgencia o estado de saude do seu HD ou revisar o seu particionamento.
Voce usa bluetooth? Nao? entao desative na bios/uefi
[ +4,596727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
E mais uma curiosidade, qual relacao voce consegue deduzir do bluetooth com rede? ta usando hotspot do seu celular no notebook?

EuricoNT
(usa XUbuntu)

Enviado em 22/03/2018 - 10:37h

root@eurico-Inspiron-5437:/home/eurico# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop1 7:1 0 132,7M 1 loop /snap/chromium/237
loop8 7:8 0 81,7M 1 loop /snap/core/4206
loop6 7:6 0 283,5M 1 loop /snap/onlyoffice-desktopeditors/15
loop4 7:4 0 81,7M 1 loop /snap/core/4017
sr0 11:0 1 1024M 0 rom
loop2 7:2 0 8,6M 1 loop /snap/sublime-text-3/11
loop0 7:0 0 4K 1 loop /snap/anbox-installer/17
loop9 7:9 0 135,5M 1 loop /snap/gimp/30
loop10 7:10 0 310,8M 1 loop
sda 8:0 0 931,5G 0 disk
&#9500;&#9472;sda2 8:2 0 1K 0 part
&#9500;&#9472;sda5 8:5 0 931G 0 part
&#9474; &#9500;&#9472;ubuntu--vg-swap_1
&#9474; &#9474; 253:1 0 7,9G 0 lvm [SWAP]
&#9474; &#9492;&#9472;ubuntu--vg-root
&#9474; 253:0 0 923,1G 0 lvm /
&#9492;&#9472;sda1 8:1 0 487M 0 part /boot
loop7 7:7 0 81,6M 1 loop /snap/core/4110
loop5 7:5 0 93,5M 1 loop /snap/slack/5
sr1 11:1 1 1,7M 0 rom
loop3 7:3 0 345,2M 1 loop /snap/anbox/46
Sim, eu uso um mouse usb. Vou desconectá-lo para ver se faz alguma diferença. Não uso bluetooth. E uso hotspot note. Não esbarrei ele em nada. E quanto a frequência, não tem aparelhos por perto que possam estar usando a mesma frequência, então isso não pode ser um problema com o roteador da NET?
Sinceramente tô pensando em fazer algo que eu não queria que é reinstalar tudo do zero. Mas se pudesse eu gostaria de evitar essa opção. Só em último caso.


Eurico Saldanha Neto

patrickpcs
(usa Nenhuma)

Enviado em 22/03/2018 - 19:09h

Me perdoe, acho que nao consegui me explicar de maneira adequada.

1-Desconecte todos os dispositivos USB (todos)
1.1-Realize o boot e repita a operacao com o comando dmesg postando o resultado para analise.

2-Verifique o SMART do seu HD.

EuricoNT
(usa XUbuntu)

Enviado em 22/03/2018 - 20:48h

Bom desconectei tudo e refiz os comandos. Deu isso:

eurico@eurico-Inspiron-5437:~$ dmesg -H
[Mar21 16:07] microcode: microcode updated early to revision 0x20, date = 2017-01-27
[ +0,000000] Linux version 4.14.13-041413-generic (kernel@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201801101001 SMP Wed Jan 10 10:02:53 UTC 2018
[ +0,000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ +0,000000] KERNEL supported cpus:
[Mar21 16:07] microcode: microcode updated early to revision 0x20, date = 2017-01-27
[ +0,000000] Linux version 4.14.13-041413-generic (kernel@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201801101001 SMP Wed Jan 10 10:02:53 UTC 2018
[ +0,000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ +0,000000] KERNEL supported cpus:
[ +0,000000] Intel GenuineIntel
[ +0,000000] AMD AuthenticAMD
[ +0,000000] Centaur CentaurHauls
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ +0,000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0,000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ +0,000000] e820: BIOS-provided physical RAM map:
[ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ +0,000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bae6cfff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000bae6d000-0x00000000bae73fff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000bae74000-0x00000000bb29ffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000bb2a0000-0x00000000bb89bfff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000bb89c000-0x00000000ca8c9fff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000ca8ca000-0x00000000cadbafff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000cadbb000-0x00000000cadd8fff] ACPI data
[ +0,000000] BIOS-e820: [mem 0x00000000cadd9000-0x00000000cb6edfff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000cb6ee000-0x00000000cbffefff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ +0,000000] NX (Execute Disable) protection: active
[ +0,000000] random: fast init done
[ +0,000000] SMBIOS 2.7 present.
[ +0,000000] DMI: Dell Inc. Inspiron 5437/03X56P, BIOS A09 01/24/2014
[ +0,000000] tsc: Fast TSC calibration using PIT
[ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ +0,000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ +0,000000] MTRR default type: uncachable
[ +0,000000] MTRR fixed ranges enabled:
[ +0,000000] 00000-9FFFF write-back
[ +0,000000] A0000-BFFFF uncachable
[ +0,000000] C0000-CFFFF write-protect
[ +0,000000] D0000-E7FFF uncachable
[ +0,000000] E8000-FFFFF write-protect
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ +0,000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0,000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ +0,000000] e820: BIOS-provided physical RAM map:
[ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ +0,000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bae6cfff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000bae6d000-0x00000000bae73fff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000bae74000-0x00000000bb29ffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000bb2a0000-0x00000000bb89bfff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000bb89c000-0x00000000ca8c9fff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000ca8ca000-0x00000000cadbafff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000cadbb000-0x00000000cadd8fff] ACPI data
[ +0,000000] BIOS-e820: [mem 0x00000000cadd9000-0x00000000cb6edfff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000cb6ee000-0x00000000cbffefff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ +0,000000] NX (Execute Disable) protection: active
[ +0,000000] random: fast init done
[ +0,000000] SMBIOS 2.7 present.
[ +0,000000] DMI: Dell Inc. Inspiron 5437/03X56P, BIOS A09 01/24/2014
[ +0,000000] tsc: Fast TSC calibration using PIT
[ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ +0,000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ +0,000000] MTRR default type: uncachable
[ +0,000000] MTRR fixed ranges enabled:
[ +0,000000] 00000-9FFFF write-back
[ +0,000000] A0000-BFFFF uncachable
[ +0,000000] C0000-CFFFF write-protect
[ +0,000000] D0000-E7FFF uncachable
[ +0,000000] E8000-FFFFF write-protect
[ +0,000000] MTRR variable ranges enabled:
[ +0,000000] 0 base 0000000000 mask 7E00000000 write-back
[ +0,000000] 1 base 0200000000 mask 7FE0000000 write-back
[ +0,000000] 2 base 0220000000 mask 7FF0000000 write-back
[ +0,000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ +0,000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ +0,000000] 5 base 00CE000000 mask 7FFE000000 uncachable
[ +0,000000] 6 base 00CD000000 mask 7FFF000000 uncachable
[ +0,000000] 7 base 022FE00000 mask 7FFFE00000 uncachable
[ +0,000000] 8 disabled
[ +0,000000] 9 disabled
[ +0,000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ +0,000000] total RAM covered: 8142M
[ +0,000000] Found optimal setting for mtrr clean up
[ +0,000000] gran_size: 64K chunk_size: 4M num_reg: 9 lose cover RAM: 0G
[ +0,000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[ +0,000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[ +0,000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffffffffff200a70]
[ +0,000000] Scanning 1 areas for low memory corruption
[ +0,000000] Base memory trampoline at [ffff8e0680097000] 97000 size 24576
[ +0,000000] Using GB pages for direct mapping
[ +0,000000] BRK [0x12d6ba000, 0x12d6bafff] PGTABLE
[ +0,000000] BRK [0x12d6bb000, 0x12d6bbfff] PGTABLE
[ +0,000000] BRK [0x12d6bc000, 0x12d6bcfff] PGTABLE
[ +0,000000] BRK [0x12d6bd000, 0x12d6bdfff] PGTABLE
[ +0,000000] BRK [0x12d6be000, 0x12d6befff] PGTABLE
[ +0,000000] BRK [0x12d6bf000, 0x12d6bffff] PGTABLE
[ +0,000000] BRK [0x12d6c0000, 0x12d6c0fff] PGTABLE
[ +0,000000] BRK [0x12d6c1000, 0x12d6c1fff] PGTABLE
[ +0,000000] BRK [0x12d6c2000, 0x12d6c2fff] PGTABLE
[ +0,000000] BRK [0x12d6c3000, 0x12d6c3fff] PGTABLE
[ +0,000000] BRK [0x12d6c4000, 0x12d6c4fff] PGTABLE
[ +0,000000] BRK [0x12d6c5000, 0x12d6c5fff] PGTABLE
[ +0,000000] RAMDISK: [mem 0x31798000-0x34bc3fff]
[ +0,000000] ACPI: Early table checksum verification disabled
[ +0,000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
[ +0,000000] ACPI: XSDT 0x00000000CADC1098 0000AC (v01 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: FACP 0x00000000CADD1300 00010C (v05 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: DSDT 0x00000000CADC11D0 01012F (v02 DELL WN09 00000000 INTL 20120711)
[ +0,000000] ACPI: FACS 0x00000000CB6E9080 000040
[ +0,000000] ACPI: APIC 0x00000000CADD1410 000072 (v03 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: FPDT 0x00000000CADD1488 000044 (v01 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: ASF! 0x00000000CADD14D0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ +0,000000] ACPI: LPIT 0x00000000CADD1578 00005C (v01 DELL WN09 00000000 AMI. 00000005)
[ +0,000000] ACPI: SSDT 0x00000000CADD15D8 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
[ +0,000000] ACPI: SLIC 0x00000000CADD1800 000176 (v01 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: SSDT 0x00000000CADD1978 0004D6 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ +0,000000] ACPI: SSDT 0x00000000CADD1E50 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ +0,000000] ACPI: MCFG 0x00000000CADD2928 00003C (v01 DELL WN09 01072009 MSFT 00000097)
[ +0,000000] ACPI: HPET 0x00000000CADD2968 000038 (v01 DELL WN09 01072009 AMI. 00000005)
[ +0,000000] ACPI: SSDT 0x00000000CADD29A0 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ +0,000000] ACPI: SSDT 0x00000000CADD2CB8 00355E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ +0,000000] ACPI: SSDT 0x00000000CADD6218 00083E (v01 SgRef SgPch 00001000 INTL 20120711)
[ +0,000000] ACPI: MSDM 0x00000000CADD6A58 000055 (v03 DELL WN09 01072009 AMI 00010013)
[ +0,000000] ACPI: SSDT 0x00000000CADD6AB0 0019E4 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ +0,000000] ACPI: CSRT 0x00000000CADD8498 0000C4 (v01 INTL HSWULT-R 00000001 INTL 20100528)
[ +0,000000] ACPI: DMI detected: Dell Inspiron 5437
[ +0,000000] ACPI: Local APIC address 0xfee00000
[ +0,000000] No NUMA configuration found
[ +0,000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[ +0,000000] NODE_DATA(0) allocated [mem 0x22fdd5000-0x22fdfffff]
[ +0,000000] Zone ranges:
[ +0,000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ +0,000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ +0,000000] Normal [mem 0x0000000100000000-0x000000022fdfffff]
[ +0,000000] Device empty
[ +0,000000] Movable zone start for each node
[ +0,000000] Early memory node ranges
[ +0,000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ +0,000000] node 0: [mem 0x0000000000100000-0x00000000bae6cfff]
[ +0,000000] node 0: [mem 0x00000000bae74000-0x00000000bb29ffff]
[ +0,000000] node 0: [mem 0x00000000bb89c000-0x00000000ca8c9fff]
[ +0,000000] node 0: [mem 0x00000000cbfff000-0x00000000cbffffff]
[ +0,000000] node 0: [mem 0x0000000100000000-0x000000022fdfffff]
[ +0,000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
[ +0,000000] On node 0 totalpages: 2072676
[ +0,000000] DMA zone: 64 pages used for memmap
[ +0,000000] DMA zone: 21 pages reserved
[ +0,000000] DMA zone: 3996 pages, LIFO batch:0
[ +0,000000] DMA32 zone: 12876 pages used for memmap
[ +0,000000] DMA32 zone: 824008 pages, LIFO batch:31
[ +0,000000] Normal zone: 19448 pages used for memmap
[ +0,000000] Normal zone: 1244672 pages, LIFO batch:31
[ +0,000000] Reserving Intel graphics memory at 0x00000000cd200000-0x00000000cf1fffff
[ +0,000000] ACPI: PM-Timer IO Port: 0x1808
[ +0,000000] ACPI: Local APIC address 0xfee00000
[ +0,000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ +0,000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ +0,000000] ACPI: IRQ0 used by override.
[ +0,000000] ACPI: IRQ9 used by override.
[ +0,000000] Using ACPI (MADT) for SMP configuration information
[ +0,000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ +0,000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ +0,000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ +0,000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ +0,000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ +0,000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ +0,000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xbae6d000-0xbae73fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xbb2a0000-0xbb89bfff]
[ +0,000000] PM: Registered nosave memory: [mem 0xca8ca000-0xcadbafff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcadbb000-0xcadd8fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcadd9000-0xcb6edfff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcb6ee000-0xcbffefff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ +0,000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ +0,000000] Booting paravirtualized kernel on bare hardware
[ +0,000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ +0,000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ +0,000000] percpu: Embedded 45 pages/cpu @ffff8e08afa00000 s146904 r8192 d29224 u524288
[ +0,000000] pcpu-alloc: s146904 r8192 d29224 u524288 alloc=1*2097152
[ +0,000000] pcpu-alloc: [0] 0 1 2 3
[ +0,000000] Built 1 zonelists, mobility grouping on. Total pages: 2040267
[ +0,000000] Policy zone: Normal
[ +0,000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.13-041413-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ +0,000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ +0,000000] Calgary: detecting Calgary via BIOS EBDA area
[ +0,000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ +0,000000] Memory: 8007672K/8290704K available (12300K kernel code, 2496K rwdata, 4132K rodata, 2352K init, 2380K bss, 283032K reserved, 0K cma-reserved)
[ +0,000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ +0,000000] Kernel/User page tables isolation: enabled
[ +0,000000] ftrace: allocating 38409 entries in 151 pages
[ +0,000000] Hierarchical RCU implementation.
[ +0,000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ +0,000000] Tasks RCU enabled.
[ +0,000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ +0,000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ +0,000000] Console: colour dummy device 80x25
[ +0,000000] console [tty0] enabled
[ +0,000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ +0,000000] hpet clockevent registered
[ +0,000000] tsc: Fast TSC calibration using PIT
[ +0,000000] tsc: Detected 1795.900 MHz processor
[ +0,000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.80 BogoMIPS (lpj=7183600)
[ +0,000000] pid_max: default: 32768 minimum: 301
[ +0,000000] ACPI: Core revision 20170728
[ +0,016187] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ +0,000023] Security Framework initialized
[ +0,000001] Yama: becoming mindful.
[ +0,000003] SELinux: Disabled at boot.
[ +0,000001] AppArmor: AppArmor disabled by boot time parameter
[ +0,001001] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ +0,000489] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ +0,000025] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ +0,000015] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ +0,000162] CPU: Physical Processor ID: 0
[ +0,000000] CPU: Processor Core ID: 0
[ +0,000005] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ +0,000000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ +0,000004] mce: CPU supports 7 MCE banks
[ +0,000007] CPU0: Thermal monitoring enabled (TM1)
[ +0,000009] process: using mwait in idle threads
[ +0,000002] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ +0,000001] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ +0,000563] Freeing SMP alternatives memory: 36K
[ +0,001553] smpboot: Max logical packages: 2
[ +0,000476] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ +0,041165] TSC deadline timer enabled
[ +0,000001] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ +0,000044] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ +0,000035] ... version: 3
[ +0,000000] ... bit width: 48
[ +0,000001] ... generic registers: 4
[ +0,000000] ... value mask: 0000ffffffffffff
[ +0,000001] ... max period: 00007fffffffffff
[ +0,000000] ... fixed-purpose events: 3
[ +0,000000] ... event mask: 000000070000000f
[ +0,000024] Hierarchical SRCU implementation.
[ +0,000793] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ +0,000010] smp: Bringing up secondary CPUs ...
[ +0,000049] x86: Booting SMP configuration:
[ +0,000001] .... node #0, CPUs: #1 #2 #3
[ +0,002803] smp: Brought up 1 node, 4 CPUs
[ +0,000000] smpboot: Total of 4 processors activated (14367.20 BogoMIPS)
[ +0,002776] devtmpfs: initialized
[ +0,000000] x86/mm: Memory block size: 128MB
[ +0,000279] evm: security.selinux
[ +0,000000] evm: security.SMACK64
[ +0,000001] evm: security.SMACK64EXEC
[ +0,000000] evm: security.SMACK64TRANSMUTE
[ +0,000000] evm: security.SMACK64MMAP
[ +0,000001] evm: security.ima
[ +0,000000] evm: security.capability
[ +0,000012] PM: Registering ACPI NVS region [mem 0xbae6d000-0xbae73fff] (28672 bytes)
[ +0,000000] PM: Registering ACPI NVS region [mem 0xcadd9000-0xcb6edfff] (9523200 bytes)
[ +0,000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ +0,000000] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ +0,000000] pinctrl core: initialized pinctrl subsystem
[ +0,000000] RTC time: 19:07:12, date: 03/21/18
[ +0,000000] NET: Registered protocol family 16
[ +0,000000] cpuidle: using governor ladder
[ +0,000000] cpuidle: using governor menu
[ +0,000000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ +0,000000] ACPI: bus type PCI registered
[ +0,000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ +0,000000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ +0,000000] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ +0,000000] PCI: Using configuration type 1 for base access
[ +0,000000] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ +0,000401] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ +0,000000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ +0,000000] ACPI: Added _OSI(Module Device)
[ +0,000000] ACPI: Added _OSI(Processor Device)
[ +0,000000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ +0,000000] ACPI: Added _OSI(Processor Aggregator Device)
[ +0,000000] ACPI: Deleted _OSI(Windows 2012)
[ +0,000000] ACPI: Executed 1 blocks of module-level executable AML code
[ +0,007337] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ +0,006165] ACPI: Dynamic OEM Table Load:
[ +0,000005] ACPI: SSDT 0xFFFF8E08A5D32C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ +0,000442] ACPI: Dynamic OEM Table Load:
[ +0,000004] ACPI: SSDT 0xFFFF8E08A5C09800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ +0,000485] ACPI: Dynamic OEM Table Load:
[ +0,000003] ACPI: SSDT 0xFFFF8E08A5D2A400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ +0,001300] ACPI: Interpreter enabled
[ +0,000029] ACPI: (supports S0 S3 S4 S5)
[ +0,000001] ACPI: Using IOAPIC for interrupt routing
[ +0,000026] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ +0,000349] ACPI: Enabled 6 GPEs in block 00 to 7F
[ +0,002035] ACPI: Power Resource [PC05] (on)
[ +0,014134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ +0,000004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ +0,000201] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ +0,000166] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ +0,000001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0,000490] PCI host bridge to bus 0000:00
[ +0,000002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ +0,000001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ +0,000000] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ +0,000000] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [bus 00-3e]
[ +0,000007] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ +0,000096] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ +0,000009] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ +0,000004] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ +0,000004] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ +0,000085] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ +0,000008] pci 0000:00:03.0: reg 0x10: [mem 0xf7a04000-0xf7a07fff 64bit]
[ +0,000106] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ +0,000018] pci 0000:00:16.0: reg 0x10: [mem 0xf7a0d000-0xf7a0d01f 64bit]
[ +0,000057] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ +0,000080] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ +0,000015] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a00000-0xf7a03fff 64bit]
[ +0,000054] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ +0,000074] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ +0,000054] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ +0,000123] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ +0,000057] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ +0,000121] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ +0,000056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ +0,000118] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ +0,000057] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ +0,000122] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ +0,000019] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a0b000-0xf7a0b3ff]
[ +0,000072] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ +0,000079] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ +0,000171] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ +0,000012] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ +0,000005] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ +0,000005] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ +0,000005] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ +0,000005] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ +0,000005] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a0a000-0xf7a0a7ff]
[ +0,000027] pci 0000:00:1f.2: PME# supported from D3hot
[ +0,000069] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ +0,000013] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a09000-0xf7a090ff 64bit]
[ +0,000015] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ +0,000134] acpiphp: Slot [1] registered
[ +0,000004] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ +0,000060] pci 0000:06:00.0: [168c:0036] type 00 class 0x028000
[ +0,000030] pci 0000:06:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[ +0,000046] pci 0000:06:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[ +0,000064] pci 0000:06:00.0: supports D1 D2
[ +0,000001] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0,011755] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ +0,000005] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ +0,000087] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[ +0,000030] pci 0000:07:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ +0,000028] pci 0000:07:00.0: reg 0x18: [mem 0xf7804000-0xf7804fff 64bit]
[ +0,000017] pci 0000:07:00.0: reg 0x20: [mem 0xf7800000-0xf7803fff 64bit]
[ +0,000098] pci 0000:07:00.0: supports D1 D2
[ +0,000001] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0,015729] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ +0,000003] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ +0,000003] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ +0,000076] pci 0000:08:00.0: [10de:0fe4] type 00 class 0x030200
[ +0,000024] pci 0000:08:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ +0,000014] pci 0000:08:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ +0,000013] pci 0000:08:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ +0,000009] pci 0000:08:00.0: reg 0x24: [io 0xd000-0xd07f]
[ +0,000009] pci 0000:08:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ +0,000007] pci 0000:08:00.0: enabling Extended Tags
[ +0,011835] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ +0,000003] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ +0,000003] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ +0,000004] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ +0,001323] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ +0,000083] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ +0,000083] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ +0,000065] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ +0,000064] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000065] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ +0,000063] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ +0,000388] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ +0,000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ +0,000000] pci 0000:00:02.0: vgaarb: bridge control possible
[ +0,000000] vgaarb: loaded
[ +0,000000] SCSI subsystem initialized
[ +0,000000] libata version 3.00 loaded.
[ +0,000000] ACPI: bus type USB registered
[ +0,000000] usbcore: registered new interface driver usbfs
[ +0,000000] usbcore: registered new interface driver hub
[ +0,000000] usbcore: registered new device driver usb
[ +0,000000] EDAC MC: Ver: 3.0.0
[ +0,000000] PCI: Using ACPI for IRQ routing
[ +0,000000] PCI: pci_cache_line_size set to 64 bytes
[ +0,000000] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ +0,000000] e820: reserve RAM buffer [mem 0xbae6d000-0xbbffffff]
[ +0,000000] e820: reserve RAM buffer [mem 0xbb2a0000-0xbbffffff]
[ +0,000000] e820: reserve RAM buffer [mem 0xca8ca000-0xcbffffff]
[ +0,000000] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[ +0,000000] NetLabel: Initializing
[ +0,000000] NetLabel: domain hash size = 128
[ +0,000000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ +0,000000] NetLabel: unlabeled traffic allowed by default
[ +0,000000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ +0,000000] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ +0,002788] clocksource: Switched to clocksource hpet
[ +0,007217] VFS: Disk quotas dquot_6.6.0
[ +0,000016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ +0,000054] pnp: PnP ACPI init
[ +0,000100] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ +0,000004] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ +0,000305] system 00:01: [io 0x0680-0x069f] has been reserved
[ +0,000001] system 00:01: [io 0xffff] has been reserved
[ +0,000001] system 00:01: [io 0xffff] has been reserved
[ +0,000001] system 00:01: [io 0xffff] has been reserved
[ +0,000001] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ +0,000001] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ +0,000001] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ +0,000001] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ +0,000000] system 00:01: [io 0x1800-0x18fe] has been reserved
[ +0,000001] system 00:01: [io 0x164e-0x164f] has been reserved
[ +0,000003] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000018] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ +0,000044] system 00:03: [io 0x1854-0x1857] has been reserved
[ +0,000002] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ +0,000036] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ +0,000002] system 00:04: [mem 0xfe800000-0xfe802fff] has been reserved
[ +0,000002] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000021] pnp 00:05: Plug and Play ACPI device, IDs DLL05f3 SYN0600 SYN0002 PNP0f13 (active)
[ +0,000022] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ +0,000409] system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe10c000-0xfe10cfff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe112000-0xfe112fff] has been reserved
[ +0,000001] system 00:07: [mem 0xfe111000-0xfe111007] has been reserved
[ +0,000001] system 00:07: [mem 0xfe111014-0xfe111fff] has been reserved
[ +0,000002] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000344] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ +0,000001] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ +0,000001] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ +0,000000] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ +0,000002] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ +0,000001] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ +0,000001] system 00:08: [mem 0xf7fee000-0xf7feefff] has been reserved
[ +0,000001] system 00:08: [mem 0xf7fd0000-0xf7fdffff] has been reserved
[ +0,000002] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000250] pnp: PnP ACPI: found 9 devices
[ +0,005652] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ +0,000010] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ +0,000002] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ +0,000001] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ +0,000021] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[ +0,000006] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[ +0,000001] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ +0,000002] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ +0,000002] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ +0,000003] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
[ +0,000002] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[ +0,000004] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ +0,000003] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ +0,000005] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ +0,000002] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ +0,000003] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ +0,000005] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ +0,000001] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ +0,000003] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ +0,000002] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ +0,000005] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ +0,000001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ +0,000000] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ +0,000001] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ +0,000001] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ +0,000001] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ +0,000001] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ +0,000001] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ +0,000000] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ +0,000001] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[ +0,000001] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ +0,000001] pci_bus 0000:04: resource 1 [mem 0xcf200000-0xcf3fffff]
[ +0,000001] pci_bus 0000:04: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[ +0,000001] pci_bus 0000:06: resource 1 [mem 0xf7900000-0xf79fffff]
[ +0,000001] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ +0,000001] pci_bus 0000:07: resource 1 [mem 0xf7800000-0xf78fffff]
[ +0,000000] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ +0,000001] pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf70fffff]
[ +0,000001] pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ +0,000134] NET: Registered protocol family 2
[ +0,000150] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ +0,000091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ +0,000100] TCP: Hash tables configured (established 65536 bind 65536)
[ +0,000024] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ +0,000019] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ +0,000041] NET: Registered protocol family 1
[ +0,000010] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ +0,023943] PCI: CLS 64 bytes, default 64
[ +0,000035] Unpacking initramfs...
[ +0,734915] Freeing initrd memory: 53424K
[ +0,000003] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ +0,000003] software IO TLB [mem 0xc68ca000-0xca8ca000] (64MB) mapped at [ffff8e07468ca000-ffff8e074a8c9fff]
[ +0,000183] Scanning for low memory corruption every 60 seconds
[ +0,000217] audit: initializing netlink subsys (disabled)
[ +0,000030] audit: type=2000 audit(1521659232.920:1): state=initialized audit_enabled=0 res=1
[ +0,000277] Initialise system trusted keyrings
[ +0,000007] Key type blacklist registered
[ +0,000025] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ +0,000806] zbud: loaded
[ +0,000282] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ +0,000094] fuse init (API version 7.26)
[ +0,000826] Key type asymmetric registered
[ +0,000001] Asymmetric key parser 'x509' registered
[ +0,000020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ +0,000022] io scheduler noop registered
[ +0,000001] io scheduler deadline registered
[ +0,000028] io scheduler cfq registered (default)
[ +0,000532] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ +0,000000] vesafb: scrolling: redraw
[ +0,000001] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ +0,000008] vesafb: framebuffer at 0xd0000000, mapped to 0xffffb845c1800000, using 4160k, total 4160k
[ +0,075034] Console: switching to colour frame buffer device 170x48
[ +0,074761] fb0: VESA VGA frame buffer device
[ +0,000011] intel_idle: MWAIT substates: 0x11142120
[ +0,000001] intel_idle: v0.4.1 model 0x45
[ +0,000134] intel_idle: lapic_timer_reliable_states 0xffffffff
[ +0,000109] ACPI: AC Adapter [AC] (on-line)
[ +0,001825] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ +0,000987] ACPI: Lid Switch [LID0]
[ +0,000025] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ +0,000007] ACPI: Power Button [PWRB]
[ +0,000020] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ +0,000005] ACPI: Sleep Button [SBTN]
[ +0,000020] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ +0,000014] ACPI: Power Button [PWRF]
[ +0,010486] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ +0,002004] thermal LNXTHERM:00: registered as thermal_zone0
[ +0,000001] ACPI: Thermal Zone [THM] (39 C)
[ +0,000123] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ +0,001098] Linux agpgart interface v0.103
[ +0,001012] loop: module loaded
[ +0,000112] libphy: Fixed MDIO Bus: probed
[ +0,000000] tun: Universal TUN/TAP device driver, 1.6
[ +0,000022] PPP generic driver version 2.4.2
[ +0,000028] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ +0,000001] ehci-pci: EHCI PCI platform driver
[ +0,000101] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ +0,000004] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ +0,000008] ehci-pci 0000:00:1d.0: debug port 2
[ +0,003894] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ +0,000009] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a0b000
[ +0,013705] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ +0,000043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ +0,000001] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0,000002] usb usb1: Product: EHCI Host Controller
[ +0,000001] usb usb1: Manufacturer: Linux 4.14.13-041413-generic ehci_hcd
[ +0,000001] usb usb1: SerialNumber: 0000:00:1d.0
[ +0,000117] hub 1-0:1.0: USB hub found
[ +0,000005] hub 1-0:1.0: 2 ports detected
[ +0,000151] ehci-platform: EHCI generic platform driver
[ +0,000009] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ +0,000003] ohci-pci: OHCI PCI platform driver
[ +0,000007] ohci-platform: OHCI generic platform driver
[ +0,000006] uhci_hcd: USB Universal Host Controller Interface driver
[ +0,000051] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ +0,004533] serio: i8042 KBD port at 0x60,0x64 irq 1
[ +0,000003] serio: i8042 AUX port at 0x60,0x64 irq 12
[ +0,000082] mousedev: PS/2 mouse device common for all mice
[ +0,000230] rtc_cmos 00:02: RTC can wake from S4
[ +0,000127] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ +0,000021] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ +0,000004] i2c /dev entries driver
[ +0,000029] device-mapper: uevent: version 1.0.3
[ +0,000063] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ +0,000005] intel_pstate: Intel P-state driver initializing
[ +0,000194] ledtrig-cpu: registered to indicate activity on CPUs
[ +0,000293] NET: Registered protocol family 10
[ +0,003925] Segment Routing with IPv6
[ +0,000014] NET: Registered protocol family 17
[ +0,000036] Key type dns_resolver registered
[ +0,000164] RAS: Correctable Errors collector initialized.
[ +0,000022] microcode: sig=0x40651, pf=0x40, revision=0x20
[ +0,000032] microcode: Microcode Update Driver: v2.2.
[ +0,000007] sched_clock: Marking stable (1126207613, 0)->(1136241228, -10033615)
[ +0,000135] registered taskstats version 1
[ +0,000010] Loading compiled-in X.509 certificates
[ +0,002421] Loaded X.509 cert 'Build time autogenerated kernel key: 41ad474c598f37619c1959d7c7ea6bf795548be3'
[ +0,000019] zswap: loaded using pool lzo/zbud
[ +0,003802] ACPI: Battery Slot [BAT0] (battery present)
[ +0,000205] Key type big_key registered
[ +0,000004] Key type trusted registered
[ +0,001693] Key type encrypted registered
[ +0,000002] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ +0,000015] evm: HMAC attrs: 0x1
[ +0,000425] Magic number: 10:639:142
[ +0,000046] acpi device:13: hash matches
[ +0,000051] rtc_cmos 00:02: setting system clock to 2018-03-21 19:07:13 UTC (1521659233)
[ +0,000034] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ +0,000000] EDD information not available.
[ +0,001900] Freeing unused kernel memory: 2352K
[ +0,000000] Write protecting the kernel read-only data: 20480k
[ +0,000412] Freeing unused kernel memory: 2008K
[ +0,003508] Freeing unused kernel memory: 2012K
[ +0,004201] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ +0,000001] x86/mm: Checking user space page tables
[ +0,004130] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ +0,004573] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ +0,045054] hidraw: raw HID events driver (C) Jiri Kosina
[ +0,013626] sdhci: Secure Digital Host Controller Interface driver
[ +0,000001] sdhci: Copyright(c) Pierre Ossman
[ +0,036063] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ +0,000004] ahci 0000:00:1f.2: version 3.0
[ +0,000002] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[ +0,010284] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ +0,000003] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ +0,000564] scsi host0: ahci
[ +0,000077] scsi host1: ahci
[ +0,000073] scsi host2: ahci
[ +0,000068] scsi host3: ahci
[ +0,000040] ata1: SATA max UDMA/133 abar m2048@0xf7a0a000 port 0xf7a0a100 irq 40
[ +0,000001] ata2: SATA max UDMA/133 abar m2048@0xf7a0a000 port 0xf7a0a180 irq 40
[ +0,000001] ata3: DUMMY
[ +0,000001] ata4: DUMMY
[ +0,001229] r8169 0000:07:00.0 eth0: RTL8106e at 0xffffb845c0c7d000, a4:1f:72:f8:a4:1a, XID 10900800 IRQ 41
[ +0,000666] r8169 0000:07:00.0 enp7s0: renamed from eth0
[ +0,020393] [drm] Memory usable by graphics device = 2048M
[ +0,000002] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ +0,000000] fb: switching to inteldrmfb from VESA VGA
[ +0,000016] Console: switching to colour dummy device 80x25
[ +0,000076] [drm] Replacing VGA console driver
[ +0,006048] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ +0,000001] [drm] Driver supports precise vblank timestamp query.
[ +0,002072] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ +0,012034] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ +0,000117] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ +0,001115] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ +0,000008] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
[ +0,000012] No Local Variables are initialized for Method [_BCL]
[ +0,000001] No Arguments are initialized for method [_BCL]
[ +0,000002] ACPI Error: Method parse/execution failed \_SB.PCI0.RP05.PEGP.DD02._BCL, AE_NOT_FOUND (20170728/psparse-550)
[ +0,000232] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:00/input/input7
[ +0,001363] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ +0,000088] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ +0,017210] fbcon: inteldrmfb (fb0) is primary device
[ +0,129726] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ +0,123324] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ +0,000017] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0,002805] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A100, max UDMA/100
[ +0,003506] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
[ +0,000003] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ +0,000022] ata2.00: configured for UDMA/100
[ +0,006349] ata1.00: configured for UDMA/133
[ +0,000288] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[ +0,000361] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ +0,000010] sd 0:0:0:0: [sda] Write Protect is off
[ +0,000002] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ +0,000001] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ +0,000014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ +0,003193] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A100 PQ: 0 ANSI: 5
[ +0,008055] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754]
[ +0,008373] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ +0,000001] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0,000268] hub 1-1:1.0: USB hub found
[ +0,000082] hub 1-1:1.0: 8 ports detected
[ +0,010248] sda: sda1 sda2 < sda5 >
[ +0,000481] sd 0:0:0:0: [sda] Attached SCSI disk
[ +0,000058] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ +0,000001] cdrom: Uniform CD-ROM driver Revision: 3.20
[ +0,000130] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ +0,000081] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ +0,008443] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..]
[ +0,000007] psmouse serio1: synaptics: Your touchpad (PNP: DLL05f3 SYN0600 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used,
[ +0,055513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x0, board id: 2382, fw id: 1238635
[ +0,035640] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ +0,176707] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ +0,052006] tsc: Refined TSC clocksource calibration: 1795.842 MHz
[ +0,000010] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e2d1a93ac, max_idle_ns: 440795217409 ns
[ +0,058104] usb 1-1.3: New USB device found, idVendor=3938, idProduct=1031
[ +0,000002] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ +0,000001] usb 1-1.3: Product: 2.4G Wireless Mouse
[ +0,000001] usb 1-1.3: Manufacturer: MOSART Semi.
[ +0,005318] usbcore: registered new interface driver usbhid
[ +0,000001] usbhid: USB HID core driver
[ +0,001851] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:3938:1031.0001/input/input9
[ +0,000132] hid-generic 0003:3938:1031.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:1d.0-1.3/input0
[ +0,070576] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ +0,173458] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=64af
[ +0,000002] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ +0,000002] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
[ +0,000001] usb 1-1.5: Manufacturer: CN0Y3PX872487394BDPZA01
[ +0,090507] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[ +0,109274] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036
[ +0,000002] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0,004784] Console: switching to colour frame buffer device 170x48
[ +0,026450] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ +0,047527] usb 1-1.7: new full-speed USB device number 6 using ehci-pci
[ +0,110402] usb 1-1.7: New USB device found, idVendor=04f3, idProduct=003d
[ +0,000003] usb 1-1.7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ +0,000001] usb 1-1.7: Product: Touchscreen
[ +0,000001] usb 1-1.7: Manufacturer: ELAN
[ +0,257524] raid6: sse2x1 gen() 10419 MB/s
[ +0,068000] raid6: sse2x1 xor() 7458 MB/s
[ +0,067996] raid6: sse2x2 gen() 12553 MB/s
[ +0,068001] raid6: sse2x2 xor() 8171 MB/s
[ +0,068000] raid6: sse2x4 gen() 14806 MB/s
[ +0,068002] raid6: sse2x4 xor() 9244 MB/s
[ +0,067999] raid6: avx2x1 gen() 20495 MB/s
[ +0,067998] raid6: avx2x1 xor() 14041 MB/s
[ +0,068001] raid6: avx2x2 gen() 24193 MB/s
[ +0,068000] raid6: avx2x2 xor() 14876 MB/s
[ +0,068001] raid6: avx2x4 gen() 27087 MB/s
[ +0,067999] raid6: avx2x4 xor() 17725 MB/s
[ +0,000000] raid6: using algorithm avx2x4 gen() 27087 MB/s
[ +0,000001] raid6: .... xor() 17725 MB/s, rmw enabled
[ +0,000000] raid6: using avx2x2 recovery algorithm
[ +0,000081] clocksource: Switched to clocksource tsc
[ +0,000885] xor: automatically using best checksumming function avx
[ +0,000819] async_tx: api initialized (async)
[ +5,353521] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ +0,998671] random: crng init done
[ +0,648626] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +
[ +0,017481] systemd[1]: Detected architecture x86-64.
[ +0,000131] systemd[1]: Set hostname to <eurico-Inspiron-5437>.
[ +3,191607] systemd[1]: Listening on Journal Socket (/dev/log).
[ +0,000077] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ +0,000025] systemd[1]: Listening on udev Control Socket.
[ +0,000116] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ +0,000009] systemd[1]: Reached target Remote File Systems (Pre).
[ +0,000029] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ +0,000006] systemd[1]: Reached target Encrypted Volumes.
[ +1,880648] lp: driver loaded but no devices found
[ +0,248445] ppdev: user-space parallel port driver
[ +1,578476] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ +0,331071] systemd-journald[382]: Received request to flush runtime journal from PID 1
[ +0,622429] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ +1,051408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ +1,643651] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ +0,113987] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ +0,000054] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ +0,000054] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ +0,000047] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ +0,000046] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ +0,001703] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3223: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ +0,000002] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ +0,000002] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ +0,000001] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ +0,000001] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ +0,000002] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
[ +0,000002] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
[ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ +0,030738] snd_hda_codec_realtek hdaudioC1D0: Failed to find dell wmi symbol dell_micmute_led_set
[ +0,392592] ath: phy0: WB335 1-ANT card detected
[ +0,000001] ath: phy0: Set BT/WLAN RX diversity capability
[ +0,006676] ath: phy0: Enable LNA combining
[ +0,001091] ath: phy0: ASPM enabled: 0x42
[ +0,000001] ath: EEPROM regdomain: 0x60
[ +0,000000] ath: EEPROM indicates we should expect a direct regpair map
[ +0,000002] ath: Country alpha2 being used: 00
[ +0,000000] ath: Regpair used: 0x60
[ +0,045448] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ +0,000488] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb845c1580000, irq=18
[ +0,280506] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.7/1-1.7:1.0/0003:04F3:003D.0002/input/input15
[ +0,000096] hid-multitouch 0003:04F3:003D.0002: input,hiddev1,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.7/input0
[ +0,111802] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ +0,000001] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ +0,000001] RAPL PMU: hw unit of domain package 2^-14 Joules
[ +0,000001] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ +0,000001] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ +0,031929] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ +0,018656] media: Linux media interface: v0.10
[ +0,034254] Linux video capture interface: v2.00
[ +0,017987] Bluetooth: Core ver 2.22
[ +0,000018] NET: Registered protocol family 31
[ +0,000001] Bluetooth: HCI device and connection manager initialized
[ +0,000003] Bluetooth: HCI socket layer initialized
[ +0,000001] Bluetooth: L2CAP socket layer initialized
[ +0,000009] Bluetooth: SCO socket layer initialized
[ +0,155965] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64af)
[ +0,014479] usbcore: registered new interface driver btusb
[ +0,026093] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[ +0,000003] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[ +0,000002] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[ +0,000002] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[ +0,000092] input: Laptop_Integrated_Webcam_HD: In as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input21
[ +0,000084] usbcore: registered new interface driver uvcvideo
[ +0,000001] USB Video Class driver (1.1.1)
[ +0,120688] AVX2 version of gcm_enc/dec engaged.
[ +0,000001] AES CTR mode by8 optimization enabled
[ +0,252608] usbcore: registered new interface driver ath3k
[ +0,241177] usb 1-1.6: USB disconnect, device number 5
[ +0,224393] usb 1-1.6: new full-speed USB device number 7 using ehci-pci
[ +0,395337] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ +0,418876] intel_rapl: Found RAPL domain package
[ +0,000001] intel_rapl: Found RAPL domain core
[ +0,000001] intel_rapl: Found RAPL domain uncore
[ +0,000000] intel_rapl: Found RAPL domain dram
[ +0,000002] intel_rapl: RAPL package 0 domain package locked by BIOS
[ +0,000004] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ +0,865547] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1
[ +0,000055] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input22
[ +0,403346] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[ +0,074155] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[ +0,017412] Creating 1 MTD partitions on "intel-spi":
[ +0,000004] 0x000000000000-0x000000800000 : "BIOS"
[ +2,346911] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ +0,044716] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ +0,553654] usb 1-1.6: device descriptor read/64, error -110
[ +1,448498] Adding 8290300k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:8290300k FS
[ +3,952748] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036
[ +0,000002] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +10,393392] new mount options do not match the existing superblock, will be ignored
[ +4,596727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ +0,000002] Bluetooth: BNEP filters: protocol multicast
[ +0,000003] Bluetooth: BNEP socket layer initialized
[Mar21 16:08] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ +0,012266] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ +0,002381] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[ +0,415979] r8169 0000:07:00.0 enp7s0: link down
[ +0,000063] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[ +3,121503] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ +7,734062] Guest personality initialized and is inactive
[ +0,000046] VMCI host device registered (name=vmci, major=10, minor=55)
[ +0,000000] Initialized host personality
[ +0,615026] NET: Registered protocol family 40
[ +3,818176] NET: Registered protocol family 4
[ +0,285886] NET: Registered protocol family 5
[ +1,451804] ip_tables: (C) 2000-2006 Netfilter Core Team
[ +1,006828] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ +0,796878] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[Mar21 16:09] Bridge firewalling registered
[ +2,393912] Initializing XFRM netlink socket
[ +0,215556] Bluetooth: RFCOMM TTY layer initialized
[ +0,000005] Bluetooth: RFCOMM socket layer initialized
[ +0,000004] Bluetooth: RFCOMM ver 1.11
[ +0,247747] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ +8,440097] wlp6s0: authenticate with 64:12:69:27:51:fb
[ +0,011870] wlp6s0: send auth to 64:12:69:27:51:fb (try 1/3)
[ +0,031543] wlp6s0: authenticated
[ +0,001141] wlp6s0: associate with 64:12:69:27:51:fb (try 1/3)
[ +0,008280] wlp6s0: RX AssocResp from 64:12:69:27:51:fb (capab=0x1411 status=0 aid=3)
[ +0,000100] wlp6s0: associated
[ +0,168589] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[Mar21 16:10] wlp6s0: authenticate with 64:12:69:27:51:fb
[ +0,017015] wlp6s0: send auth to 64:12:69:27:51:fb (try 1/3)
[ +0,003028] wlp6s0: authenticated
[ +0,006980] wlp6s0: associate with 64:12:69:27:51:fb (try 1/3)
[ +0,060419] wlp6s0: RX AssocResp from 64:12:69:27:51:fb (capab=0x1411 status=0 aid=3)
[ +0,000097] wlp6s0: associated
(END)


rroot@eurico-Inspiron-5437:/home/eurico# sudo smartctl -i /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.14.13-041413-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S314J90DB55737
LU WWN Device Id: 5 0004cf 20bc180b9
Firmware Version: 2BA30001
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Mar 22 20:46:12 2018 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

root@eurico-Inspiron-5437:/home/eurico# sudo smartctl -t short /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.14.13-041413-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Thu Mar 22 20:52:00 2018

Use smartctl -X to abort test.
root@eurico-Inspiron-5437:/home/eurico# sudo smartctl -l selftest /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.14.13-041413-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8672 -
# 2 Extended offline Interrupted (host reset) 90% 6193 -
# 3 Short offline Completed without error 00% 6192 -
# 4 Short offline Completed without error 00% 6187 -
# 5 Short offline Completed without error 00% 5662 -
# 6 Short offline Completed without error 00% 5437 -
# 7 Short offline Completed without error 00% 5207 -
# 8 Short offline Interrupted (host reset) 90% 4993 -
# 9 Short offline Completed without error 00% 3986 -
#10 Short offline Completed without error 00% 3875 -
#11 Short offline Completed without error 00% 3651 -
#12 Short offline Completed without error 00% 3430 -
#13 Short offline Aborted by host 90% 2934 -
#14 Short offline Completed without error 00% 2681 -
#15 Short offline Completed without error 00% 2183 -
#16 Short offline Completed without error 00% 1992 -
#17 Short offline Completed without error 00% 1635 -
#18 Short offline Completed without error 00% 1079 -
#19 Short offline Completed without error 00% 294 -
#20 Short offline Completed without error 00% 0 -