Temperaturas da máquina.
1. Temperaturas da máquina.
Hgfs
(usa Arch Linux)
Enviado em 17/09/2015 - 16:08h
Então pessoal, beleza? Utilizo aqui o Ubuntu 14.04.03 com ambiente XFCE.Minha placa mãe é uma asrock n68-s3 fx.
Sou bem iniciante mesmo, já segui vários how-to e não está dando certo.
Eu quero monitorar a temperatura do chipset (7025 nforce 630a) da minha placa, que lembro que no Windows batia 60º ( o que é normal, porém quero monitorar para que não passe disso ), mas como desinstalei o Windows, não tenho mais como monitorar.
E outra coisa pessoal.. Quando rodo o comando
sensors, não me retorna os 4 cores da minha CPU.
Aqui o que me retorna do comando
sudo sensors-detect:
# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)
# Board: ASRock N68-S3 FX
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): yes
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... Success!
(driver `k10temp')
AMD Family 15h power sensors... Success!
(driver `fam15h_power')
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Winbond W83627DHG-P/W83527HG Super IO Sensors' Success!
(address 0x290, driver `w83627ehf')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): yes
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): yes
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
Using driver `i2c-nforce2' for device 0000:00:01.1: nVidia Corporation nForce SMBus (MCP61)
Next adapter: SMBus nForce2 adapter at 0600 (i2c-0)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83627ehf':
* ISA bus, address 0x290
Chip `Winbond W83627DHG-P/W83527HG Super IO Sensors' (confidence: 9)
Driver `fam15h_power' (autoloaded):
* Chip `AMD Family 15h power sensors' (confidence: 9)
Driver `k10temp' (autoloaded):
* Chip `AMD Family 15h thermal sensors' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
w83627ehf
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)yes
Successful!
Monitoring programs won't work until the needed modules are
loaded. You may want to run 'service kmod start'
to load them.
Unloading cpuid... OK
Obviamente eu reinicio o pc e rodo o comando
sensors:
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.35 V (min = +0.00 V, max = +1.74 V)
in1: +1.06 V (min = +2.04 V, max = +2.04 V) ALARM
AVCC: +3.34 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.34 V (min = +2.98 V, max = +3.63 V)
in4: +1.67 V (min = +1.78 V, max = +1.53 V) ALARM
in5: +1.74 V (min = +2.04 V, max = +1.53 V) ALARM
in6: +1.84 V (min = +2.04 V, max = +2.04 V) ALARM
3VSB: +3.47 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.12 V (min = +2.70 V, max = +3.63 V)
fan1: 2518 RPM (min = 709 RPM, div = 8)
fan2: 4326 RPM (min = 888 RPM, div = 8)
fan3: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan4: 0 RPM (min = 1506 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
temp1: +44.0°C (high = -1.0°C, hyst = -70.0°C) ALARM sensor = thermistor
temp2: +51.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
temp3: +28.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
intrusion0: ALARM
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +28.4°C (high = +70.0°C)
(crit = +70.0°C, hyst = +67.0°C)
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 201.53 W (crit = 156.83 W)
Obrigado desde já pessoal ^^
A maior comunidade GNU/Linux da América Latina! Artigos, dicas, tutoriais, fórum, scripts e muito mais. Ideal para quem busca auto-ajuda.
Site hospedado por:
