HD EXTERNO
1. HD EXTERNO
CarolMata
(usa Ubuntu)
Enviado em 26/12/2008 - 21:24h
Tinha um XP e usava meu HD externo SATA nele. Troquei por um note com Linux e fui tentar abrir o HD e NADA!!Ele reconhece que o hd esta plugado, mas nao consigo abrir menhum arquivo. Fui no terminal, dmesg e apareceu isso, nao sei se ajuda algo, mas alguem sabe o que fazer??[ 25.506035] net_namespace: 64 bytes
[ 25.506042] Booting paravirtualized kernel on bare hardware
[ 25.506521] Time: 20:59:44 Date: 12/26/08
[ 25.506548] NET: Registered protocol family 16
[ 25.506730] EISA bus registered
[ 25.506734] ACPI: bus type pci registered
[ 25.507113] PCI: PCI BIOS revision 3.00 entry at 0xfde18, last bus=14
[ 25.507116] PCI: Using configuration type 1
[ 25.507118] Setting up standard PCI resources
[ 25.508845] ACPI: EC: Look up EC in DSDT
[ 25.511283] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 25.511285] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 25.515247] ACPI: Interpreter enabled
[ 25.515251] ACPI: (supports S0 S3 S4 S5)
[ 25.515263] ACPI: Using IOAPIC for interrupt routing
[ 25.521018] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 25.634937] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 25.634939] ACPI: EC: driver started in interrupt mode
[ 25.634981] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.635196] pci 0000:00:12.0: set SATA to AHCI mode
[ 25.636784] PCI: Transparent bridge - 0000:00:14.4
[ 25.636859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.637039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 25.637154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 25.637266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 25.637378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 25.637489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT]
[ 25.637603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[ 25.637732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 25.637952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 25.641958] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 25.642085] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 25.642211] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 25.642332] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 25.642454] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 25.642575] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 25.642697] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 25.642819] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 25.642961] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.642995] pnp: PnP ACPI init
[ 25.643002] ACPI: bus type pnp registered
[ 25.666375] pnp: PnP ACPI: found 11 devices
[ 25.666377] ACPI: ACPI bus type pnp unregistered
[ 25.666381] PnPBIOS: Disabled by ACPI PNP
[ 25.666621] PCI: Using ACPI for IRQ routing
[ 25.666623] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.666629] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[ 25.666632] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[ 25.666635] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
[ 25.666637] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 25.666639] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 25.742066] NET: Registered protocol family 8
[ 25.742068] NET: Registered protocol family 20
[ 25.742111] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 25.742115] hpet0: 4 32-bit timers, 14318180 Hz
[ 25.743162] AppArmor: AppArmor Filesystem Enabled
[ 25.745553] Time: hpet clocksource has been installed.
[ 25.745559] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 25.746072] Could not switch to high resolution mode on CPU 1
[ 25.745569] lapic is not functional.
[ 25.745571] Could not switch to high resolution mode on CPU 0
[ 25.754093] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.754097] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.754105] system 00:08: ioport range 0xe02c-0xe02f has been reserved
[ 25.754109] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 25.754111] system 00:08: ioport range 0x220-0x22f has been reserved
[ 25.754114] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 25.754117] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 25.754120] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 25.754123] system 00:08: ioport range 0x530-0x537 has been reserved
[ 25.754125] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 25.754131] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 25.754134] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 25.754136] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 25.754139] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 25.754142] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[ 25.754145] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[ 25.754147] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 25.754150] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 25.754153] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 25.754156] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 25.754159] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 25.754162] system 00:08: ioport range 0x280-0x293 has been reserved
[ 25.754164] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 25.754171] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 25.754174] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 25.754177] system 00:09: iomem range 0x0-0x0 could not be reserved
[ 25.784617] PCI: Bridge: 0000:00:01.0
[ 25.784619] IO window: 9000-9fff
[ 25.784622] MEM window: f8000000-f81fffff
[ 25.784625] PREFETCH window: f0000000-f7ffffff
[ 25.784628] PCI: Bridge: 0000:00:04.0
[ 25.784629] IO window: disabled.
[ 25.784632] MEM window: disabled.
[ 25.784634] PREFETCH window: disabled.
[ 25.784637] PCI: Bridge: 0000:00:05.0
[ 25.784638] IO window: disabled.
[ 25.784641] MEM window: disabled.
[ 25.784643] PREFETCH window: disabled.
[ 25.784646] PCI: Bridge: 0000:00:06.0
[ 25.784648] IO window: a000-afff
[ 25.784651] MEM window: f8300000-f83fffff
[ 25.784653] PREFETCH window: 88000000-880fffff
[ 25.784656] PCI: Bridge: 0000:00:07.0
[ 25.784658] IO window: disabled.
[ 25.784660] MEM window: f8200000-f82fffff
[ 25.784663] PREFETCH window: disabled.
[ 25.784670] PCI: Bus 13, cardbus bridge: 0000:0c:05.0
[ 25.784672] IO window: 00001400-000014ff
[ 25.784680] IO window: 00001800-000018ff
[ 25.784685] PREFETCH window: 8c000000-8fffffff
[ 25.784690] MEM window: 90000000-93ffffff
[ 25.784695] PCI: Bridge: 0000:00:14.4
[ 25.784696] IO window: disabled.
[ 25.784702] MEM window: f8400000-f84fffff
[ 25.784705] PREFETCH window: disabled.
[ 25.784727] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 25.784734] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 25.784742] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 25.784749] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 25.784776] ACPI: PCI Interrupt 0000:0c:05.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 25.784793] NET: Registered protocol family 2
[ 25.830087] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 25.830374] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 25.831072] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 25.831409] TCP: Hash tables configured (established 131072 bind 65536)
[ 25.831413] TCP reno registered
[ 25.846150] checking if image is initramfs... it is
[ 26.221291] ACPI: EC: missing write data confirmation, don't expect it any longer.
[ 26.535733] Freeing initrd memory: 7701k freed
[ 26.536497] audit: initializing netlink socket (disabled)
[ 26.536510] audit(1230325183.644:1): initialized
[ 26.536700] highmem bounce pool size: 64 pages
[ 26.538632] VFS: Disk quotas dquot_6.5.1
[ 26.538714] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.538843] io scheduler noop registered
[ 26.538846] io scheduler anticipatory registered
[ 26.538848] io scheduler deadline registered
[ 26.538858] io scheduler cfq registered (default)
[ 26.538933] Boot video device is 0000:01:05.0
[ 26.539058] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 26.539079] assign_interrupt_mode Found MSI capability
[ 26.539102] Allocate Port Service[0000:00:04.0:pcie00]
[ 26.539141] Allocate Port Service[0000:00:04.0:pcie02]
[ 26.539204] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 26.539223] assign_interrupt_mode Found MSI capability
[ 26.539241] Allocate Port Service[0000:00:05.0:pcie00]
[ 26.539278] Allocate Port Service[0000:00:05.0:pcie02]
[ 26.539336] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 26.539355] assign_interrupt_mode Found MSI capability
[ 26.539373] Allocate Port Service[0000:00:06.0:pcie00]
[ 26.539408] Allocate Port Service[0000:00:06.0:pcie02]
[ 26.539469] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 26.539489] assign_interrupt_mode Found MSI capability
[ 26.539507] Allocate Port Service[0000:00:07.0:pcie00]
[ 26.539543] Allocate Port Service[0000:00:07.0:pcie02]
[ 26.539782] isapnp: Scanning for PnP cards...
[ 26.896009] isapnp: No Plug & Play device found
[ 26.925419] Real Time Clock Driver v1.12ac
[ 26.925688] hpet_resources: 0xfed00000 is busy
[ 26.925709] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.926958] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.927028] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.927127] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.967977] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.967983] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.985427] mice: PS/2 mouse device common for all mice
[ 26.985552] EISA: Probing bus 0 at eisa.0
[ 26.985560] Cannot allocate resource for EISA slot 1
[ 26.985587] Cannot allocate resource for EISA slot 8
[ 26.985589] EISA: Detected 0 cards.
[ 26.985592] cpuidle: using governor ladder
[ 26.985594] cpuidle: using governor menu
[ 26.985684] NET: Registered protocol family 1
[ 26.985711] Using IPI No-Shortcut mode
[ 26.985745] registered taskstats version 1
[ 26.985880] Magic number: 4:556:1004
[ 26.985888] hash matches device ttye3
[ 26.986006] hash matches device 00:06
[ 26.986028] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.986031] EDD information not available.
[ 26.986256] Freeing unused kernel memory: 364k freed
[ 27.033350] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.281036] fuse init (API version 7.9)
[ 28.306559] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 28.310263] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[ 28.312097] ACPI: Thermal Zone [THRM] (49 C)
[ 28.738317] SCSI subsystem initialized
[ 28.747684] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 28.747717] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 28.747740] PCI: Setting latency timer of device 0000:08:00.0 to 64
[ 28.748061] eth0: RTL8168b/8111b at 0xf8852000, 00:1b:38:d2:68:61, XID 38000000 IRQ 219
[ 28.763963] usbcore: registered new interface driver usbfs
[ 28.763986] usbcore: registered new interface driver hub
[ 28.773033] usbcore: registered new device driver usb
[ 28.788566] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 28.788610] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 28.788624] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 28.788910] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 28.788934] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf8704000
[ 28.790592] libata version 3.00 loaded.
[ 28.844475] usb usb1: configuration #1 chosen from 1 choice
[ 28.844498] hub 1-0:1.0: USB hub found
[ 28.844511] hub 1-0:1.0: 2 ports detected
[ 28.948384] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19
[ 28.948401] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 28.948423] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 28.948441] ohci_hcd 0000:00:13.1: irq 19, io mem 0xf8705000
[ 29.004395] usb usb2: configuration #1 chosen from 1 choice
[ 29.004419] hub 2-0:1.0: USB hub found
[ 29.004432] hub 2-0:1.0: 2 ports detected
[ 29.108289] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 29.108307] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 29.108333] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 29.108353] ohci_hcd 0000:00:13.2: irq 17, io mem 0xf8706000
[ 29.164293] usb usb3: configuration #1 chosen from 1 choice
[ 29.164318] hub 3-0:1.0: USB hub found
[ 29.164330] hub 3-0:1.0: 2 ports detected
[ 29.268197] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19
[ 29.268215] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 29.268239] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 29.268255] ohci_hcd 0000:00:13.3: irq 19, io mem 0xf8707000
[ 29.324208] usb usb4: configuration #1 chosen from 1 choice
[ 29.324233] hub 4-0:1.0: USB hub found
[ 29.324245] hub 4-0:1.0: 2 ports detected
[ 29.428120] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 17
[ 29.428138] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 29.428164] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 29.428180] ohci_hcd 0000:00:13.4: irq 17, io mem 0xf8708000
[ 29.484139] usb usb5: configuration #1 chosen from 1 choice
[ 29.484164] hub 5-0:1.0: USB hub found
[ 29.484177] hub 5-0:1.0: 2 ports detected
[ 29.587613] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20
[ 29.587633] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 29.587677] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 29.587720] ehci_hcd 0000:00:13.5: debug port 1
[ 29.587736] ehci_hcd 0000:00:13.5: irq 20, io mem 0xf8709400
[ 29.739824] usb 4-2: new full speed USB device using ohci_hcd and address 2
[ 29.751316] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.751441] usb usb6: configuration #1 chosen from 1 choice
[ 29.751465] hub 6-0:1.0: USB hub found
[ 29.751471] hub 6-0:1.0: 10 ports detected
[ 29.855578] ahci 0000:00:12.0: version 3.0
[ 29.855611] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 29.855633] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 29.855636] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
[ 30.175572] usb 6-8: new high speed USB device using ehci_hcd and address 2
[ 30.321175] usb 6-8: configuration #1 chosen from 1 choice
[ 30.858734] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 30.858741] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
[ 30.859164] scsi0 : ahci
[ 30.859480] scsi1 : ahci
[ 30.859645] scsi2 : ahci
[ 30.859799] scsi3 : ahci
[ 30.859883] ata1: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709100 irq 21
[ 30.859888] ata2: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709180 irq 21
[ 30.859891] ata3: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709200 irq 21
[ 30.859895] ata4: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709280 irq 21
[ 31.334437] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 31.339242] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA/133
[ 31.339247] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 31.345263] ata1.00: configured for UDMA/133
[ 31.654254] ata2: SATA link down (SStatus 0 SControl 300)
[ 31.966077] ata3: SATA link down (SStatus 0 SControl 300)
[ 32.277901] ata4: SATA link down (SStatus 0 SControl 300)
[ 32.278026] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5
[ 32.279515] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 23 (level, low) -> IRQ 22
[ 32.279562] PCI: Setting latency timer of device 0000:00:14.1 to 64
[ 32.279576] ACPI: PCI interrupt for device 0000:00:14.1 disabled
[ 32.279556] ACPI: PCI Interrupt 0000:0c:05.1[B] -> GSI 21 (level, low) -> IRQ 23
[ 32.332466] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f8401000-f84017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 32.337145] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 23 (level, low) -> IRQ 22
[ 32.337836] scsi4 : pata_atiixp
[ 32.338380] scsi5 : pata_atiixp
[ 32.339012] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 32.339016] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 32.369793] Driver 'sd' needs updating - please use bus_type methods
[ 32.369882] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 32.369894] sd 0:0:0:0: [sda] Write Protect is off
[ 32.369897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 32.369912] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 32.369961] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 32.369970] sd 0:0:0:0: [sda] Write Protect is off
[ 32.369973] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 32.369987] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 32.369991] sda:<6>ata5.00: ATAPI: SlimtypeDVD A DS8A1P, CX12, max UDMA/33
[ 32.878478] ata5.00: configured for UDMA/33
[ 33.036237] scsi 4:0:0:0: CD-ROM Slimtype DVD A DS8A1P CX12 PQ: 0 ANSI: 5
[ 33.042274] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 33.042280] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 33.051127] sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 33.083797] sda5 >
[ 33.083904] sd 0:0:0:0: [sda] Attached SCSI disk
[ 33.089328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.089353] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 33.098983] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 33.098989] Uniform CD-ROM driver Revision: 3.20
[ 33.099043] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 33.416026] Attempting manual resume
[ 33.416030] swsusp: Resume From Partition 8:5
[ 33.416032] PM: Checking swsusp image.
[ 33.416260] PM: Resume from disk failed.
[ 33.457546] kjournald starting. Commit interval 5 seconds
[ 33.457560] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.609771] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f82c8400b9a]
[ 39.211419] Linux agpgart interface v0.102
[ 39.333977] input: Power Button (FF) as /devices/virtual/input/input2
[ 39.354899] ACPI: Power Button (FF) [PWRF]
[ 39.355015] input: Lid Switch as /devices/virtual/input/input3
[ 39.355100] ACPI: Lid Switch [LID]
[ 39.355170] input: Power Button (CM) as /devices/virtual/input/input4
[ 39.374411] ACPI: Power Button (CM) [PWRB]
[ 39.570462] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.606914] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.640994] ACPI: AC Adapter [ACAD] (on-line)
[ 39.898154] ACPI: Battery Slot [BAT1] (battery absent)
[ 40.120105] r8169: eth0: link up
[ 40.120114] r8169: eth0: link up
[ 40.244514] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input5
[ 40.261903] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 40.465569] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 41.121519] Linux video capture interface: v2.00
[ 41.203208] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 41.285524] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008)
[ 41.288201] usbcore: registered new interface driver uvcvideo
[ 41.288207] USB Video Class driver (v0.1.0)
[ 41.432314] sdhci: Secure Digital Host Controller Interface driver
[ 41.432319] sdhci: Copyright(c) Pierre Ossman
[ 41.432376] sdhci: SDHCI controller found at 0000:0c:05.2 [1180:0822] (rev 21)
[ 41.432401] ACPI: PCI Interrupt 0000:0c:05.2[C] -> GSI 22 (level, low) -> IRQ 21
[ 41.432426] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 41.432474] mmc0: SDHCI at 0xf8401800 irq 21 DMA
[ 41.487160] Yenta: CardBus bridge found at 0000:0c:05.0 [14c0:002c]
[ 41.613486] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 41.613492] Socket status: 30000006
[ 41.613497] pcmcia: parent PCI bridge Memory window: 0xf8400000 - 0xf84fffff
[ 41.724185] NET: Registered protocol family 17
[ 41.780999] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 23 (level, low) -> IRQ 22
[ 41.812299] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 41.982314] input: PS/2 Mouse as /devices/virtual/input/input7
[ 42.064751] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 43.261812] cs: IO port probe 0x100-0x3af: clean.
[ 43.263635] cs: IO port probe 0x3e0-0x4ff: clean.
[ 43.264458] cs: IO port probe 0x820-0x8ff: clean.
[ 43.265111] cs: IO port probe 0xc00-0xcf7: clean.
[ 43.265828] cs: IO port probe 0xa00-0xaff: clean.
[ 43.432726] lp: driver loaded but no devices found
[ 43.544020] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 43.633724] ndiswrapper: driver bcmwl5 (Broadcom,09/20/2007, 4.170.25.12) loaded
[ 43.634020] ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 43.634093] PCI: Setting latency timer of device 0000:0a:00.0 to 64
[ 43.644157] ndiswrapper: using IRQ 20
[ 44.016113] wlan0: ethernet device 00:1d:19:ef:d3:7e using NDIS driver: bcmwl5, version: 0x4aa190c, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4315.5.conf
[ 44.016197] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 44.027847] usbcore: registered new interface driver ndiswrapper
[ 44.132620] Adding 5695000k swap on /dev/sda5. Priority:-1 extents:1 across:5695000k
[ 44.693805] EXT3 FS on sda1, internal journal
[ 45.758089] NET: Registered protocol family 10
[ 45.758350] lo: Disabled Privacy Extensions
[ 45.758959] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 46.277555] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.821569] No dock devices found.
[ 47.170153] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 processors (2 cpu cores) (version 2.20.00)
[ 47.169707] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x12
[ 47.169712] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x13
[ 47.169715] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a
[ 47.928059] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 47.928066] apm: disabled - APM is not SMP safe.
[ 48.172252] ppdev: user-space parallel port driver
[ 48.312276] audit(1230325207.009:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5329 profile="/usr/sbin/cupsd" namespace="default"
[ 48.748209] Clocksource tsc unstable (delta = -124715674 ns)
[ 50.315646] Bluetooth: Core ver 2.11
[ 50.316148] NET: Registered protocol family 31
[ 50.316151] Bluetooth: HCI device and connection manager initialized
[ 50.316155] Bluetooth: HCI socket layer initialized
[ 50.333838] Bluetooth: L2CAP ver 2.9
[ 50.333844] Bluetooth: L2CAP socket layer initialized
[ 50.378760] Bluetooth: RFCOMM socket layer initialized
[ 50.378775] Bluetooth: RFCOMM TTY layer initialized
[ 50.378777] Bluetooth: RFCOMM ver 1.8
[ 51.753029] [drm] Initialized drm 1.1.0 20060810
[ 52.666027] eth0: no IPv6 routers present
[ 56.362386] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 66.127835] CPU0 attaching NULL sched-domain.
[ 66.127845] CPU1 attaching NULL sched-domain.
[ 66.150182] CPU0 attaching sched-domain:
[ 66.150190] domain 0: span 03
[ 66.150192] groups: 01 02
[ 66.150196] CPU1 attaching sched-domain:
[ 66.150198] domain 0: span 03
[ 66.150199] groups: 02 01
[ 2231.539247] APIC error on CPU0: 00(40)
[ 2231.534661] APIC error on CPU1: 00(40)
[ 2300.968923] APIC error on CPU0: 40(40)
[ 2300.964158] APIC error on CPU1: 40(40)
[ 2888.094930] usb 6-2: new high speed USB device using ehci_hcd and address 3
[ 2888.161162] usb 6-2: configuration #1 chosen from 1 choice
[ 2888.244152] usbcore: registered new interface driver libusual
[ 2888.284613] Initializing USB Mass Storage driver...
[ 2888.286401] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2888.287125] usbcore: registered new interface driver usb-storage
[ 2888.287130] USB Mass Storage support registered.
[ 2888.288771] usb-storage: device found at 3
[ 2888.288777] usb-storage: waiting for device to settle before scanning
[ 2890.857411] usb-storage: device scan complete
[ 2890.864402] scsi 6:0:0:0: Direct-Access SAMSUNG HM250JI PQ: 0 ANSI: 2 CCS
[ 2890.865336] sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 2890.865987] sd 6:0:0:0: [sdb] Write Protect is off
[ 2890.865992] sd 6:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 2890.865995] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2890.867144] sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 2890.867755] sd 6:0:0:0: [sdb] Write Protect is off
[ 2890.867758] sd 6:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 2890.867760] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2890.867765] sdb: sdb1 sdb2 < sdb5 >
[ 2891.157840] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2891.157890] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2891.693303] kjournald starting. Commit interval 5 seconds
[ 2891.701273] EXT3 FS on sdb1, internal journal
[ 2891.701280] EXT3-fs: recovery complete.
[ 2891.701286] EXT3-fs: mounted filesystem with ordered data mode.
[ 2891.779918] kjournald starting. Commit interval 5 seconds
[ 2891.780495] EXT3 FS on sdb5, internal journal
[ 2891.780504] EXT3-fs: mounted filesystem with ordered data mode.
[ 2946.673557] APIC error on CPU0: 40(40)
[ 2946.667085] APIC error on CPU1: 40(40)
[ 3546.479583] APIC error on CPU0: 40(40)
[ 3546.471141] APIC error on CPU1: 40(40)
[ 4219.315357] APIC error on CPU0: 40(40)
[ 4219.304566] APIC error on CPU1: 40(40)
[ 4371.855957] APIC error on CPU0: 40(40)
[ 4371.844731] APIC error on CPU1: 40(40)
daten@daten-laptop:~$