Placa de TVPixelview Pro no Slackware 12.2

janunesdemor
(usa Slackware)

Enviado em 22/02/2009 - 10:40h

Prezados, tenho uma placa de TV Pixelview Pro bt878, acontece que está dificil sintonizar ela, embora eu consegui. com esta configuração:

Eu crie este escript aqui
modprobe -r bt878
modprobe -r bttv
modprobe -r tuner
modprobe -r msp3400
modprobe bttv card=16 radio=1 tuner=1
sleep 3
chmod ugo+rwx /dev/video0

Pois, bem ela inicia tudo ok... mais não tem som, e mais eu só consigo fazer ela funcionar com xdtv e no kdetv, o tal do tvtime não da nenhum sinal.

Mais o meu problema esta no som, veja a baixo minha configuração completa do computador:

# dmesg
x_risc 7944 1 bttv
tveeprom 15876 1 bttv
cfg80211 27144 2 rt2x00lib,mac80211
eeprom_93cx6 5888 1 rt61pci
snd 51748 23 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore 10080 1 snd
agpgart 32584 1 nvidia
forcedeth 55952 0
button 10128 0
evdev 13088 3
thermal_sys 15144 3 fan,thermal,processor
hwmon 6300 2 k8temp,thermal_sys
root@darkstar:/inst/bttv-0.9.15#
root@darkstar:/inst/bttv-0.9.15# cd ..
root@darkstar:/inst# cd /tvinit
root@darkstar:/tvinit# ls
canais.txt iniciatv2* intv16_5* tvtuner1*
iniciatv* iniciatvfunciona* tvradio_funciona*
root@darkstar:/tvinit# cat tvtuner1
modprobe -r bt878
modprobe -r bttv
modprobe -r tuner
modprobe bttv card=24 tuner=1
sleep 3
chmod ugo+rwx /dev/video0 root@darkstar:/tvinit# ls
canais.txt iniciatv2* intv16_5* tvtuner1*
iniciatv* iniciatvfunciona* tvradio_funciona*
root@darkstar:/tvinit# cat iniciatv2
modprobe -r bt878
modprobe -r bttv
modprobe -r tuner
modprobe -r msp3400
modprobe bt878 card=16 radio=1 tuner=1
modprobe tvaudio
sleep 3
chmod ugo+rwx /dev/video0

Agora,vendo a configuração completa do computador

root@darkstar:/tvinit# dmesg
up to 37ee0000 @ 10000-16000

ACPI: RSDP 000F7B40, 0014 (r0 Nvidia)
ACPI: RSDT 37EE3000, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 37EE3080, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609]
ACPI: DSDT 37EE3100, 5C8A (r1 NVIDIA AWRDACPI 1000 MSFT 3000000)
ACPI: FACS 37EE0000, 0040
ACPI: SSDT 37EE8E80, 028A (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET 37EE9140, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG 37EE9180, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 37EE8DC0, 0098 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
0MB HIGHMEM available.
894MB LOWMEM available.
mapped low ram: 0 - 37ee0000
low ram: 00000000 - 37ee0000
bootmap 00012000 - 00018fdc
(8 early reservations) ==> bootmem [0000000000 - 0037ee0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000a6a790] TEXT DATA BSS ==> [0000100000 - 0000a6a790]
#4 [0000a6b000 - 0000a6f000] INIT_PG_TABLE ==> [0000a6b000 - 0000a6f000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00f3b00] 000f3b00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037ee0
HighMem 0x00037ee0 -> 0x00037ee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00037ee0
On node 0 totalpages: 228975
free_area_init_node: node 0, pgdat c093eb00, node_mem_map c1000200
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 223234 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
PERCPU: Allocating 39452 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227185
Kernel command line: BOOT_IMAGE=Linux ro root=305 vt.default_utf8=1
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2611.971 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 897892k/916352k available (6388k kernel code, 17820k reserved, 2148k data, 424k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7ee0000 ( 894 MB)
.init : 0xc0963000 - 0xc09cd000 ( 424 kB)
.data : 0xc073d137 - 0xc0956278 (2148 kB)
.text : 0xc0100000 - 0xc073d137 (6388 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.94 BogoMIPS (lpj=10447884)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5224.05 BogoMIPS (lpj=10448100)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
Brought up 2 CPUs
Total of 2 processors activated (10447.99 BogoMIPS).
net_namespace: 776 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 7949.000 MB/sec
xor: using function: pIII_sse (7949.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:01.0 reg 18 io port: [1d00, 1dff]
PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f]
PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f]
PCI: 0000:00:01.1 reg 24 io port: [f400, f43f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:05.0 reg 10 32bit mmio: [fe024000, fe027fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
PCI: 0000:00:06.0 reg 20 io port: [f000, f00f]
PCI: 0000:00:07.0 reg 10 32bit mmio: [fe02d000, fe02dfff]
PCI: 0000:00:07.0 reg 14 io port: [ec00, ec07]
pci 0000:00:07.0: supports D1
pci 0000:00:07.0: supports D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
PCI: 0000:00:08.0 reg 10 io port: [9f0, 9f7]
PCI: 0000:00:08.0 reg 14 io port: [bf0, bf3]
PCI: 0000:00:08.0 reg 18 io port: [970, 977]
PCI: 0000:00:08.0 reg 1c io port: [b70, b73]
PCI: 0000:00:08.0 reg 20 io port: [d800, d80f]
PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02c000, fe02cfff]
PCI: 0000:00:08.1 reg 10 io port: [9e0, 9e7]
PCI: 0000:00:08.1 reg 14 io port: [be0, be3]
PCI: 0000:00:08.1 reg 18 io port: [960, 967]
PCI: 0000:00:08.1 reg 1c io port: [b60, b63]
PCI: 0000:00:08.1 reg 20 io port: [c400, c40f]
PCI: 0000:00:08.1 reg 24 32bit mmio: [fe02b000, fe02bfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
PCI: 0000:00:0d.0 reg 10 32bit mmio: [fb000000, fbffffff]
PCI: 0000:00:0d.0 reg 14 64bit mmio: [e0000000, efffffff]
PCI: 0000:00:0d.0 reg 1c 64bit mmio: [fc000000, fcffffff]
PCI: 0000:00:0d.0 reg 30 32bit mmio: [0, 1ffff]
PCI: 0000:01:05.0 reg 10 32bit mmio: [fd7f8000, fd7fffff]
PCI: 0000:01:06.0 reg 10 32bit mmio: [fdeff000, fdefffff]
PCI: 0000:01:06.1 reg 10 32bit mmio: [fdefe000, fdefefff]
pci 0000:00:04.0: transparent bridge
PCI: bridge 0000:00:04.0 io port: [b000, bfff]
PCI: bridge 0000:00:04.0 32bit mmio: [fd700000, fd7fffff]
PCI: bridge 0000:00:04.0 32bit mmio pref: [fde00000, fdefffff]
PCI: bridge 0000:00:09.0 io port: [a000, afff]
PCI: bridge 0000:00:09.0 32bit mmio: [fdd00000, fddfffff]
PCI: bridge 0000:00:09.0 64bit mmio pref: [fdc00000, fdcfffff]
PCI: bridge 0000:00:0b.0 io port: [9000, 9fff]
PCI: bridge 0000:00:0b.0 32bit mmio: [fdb00000, fdbfffff]
PCI: bridge 0000:00:0b.0 64bit mmio pref: [fda00000, fdafffff]
PCI: bridge 0000:00:0c.0 io port: [8000, 8fff]
PCI: bridge 0000:00:0c.0 32bit mmio: [fd900000, fd9fffff]
PCI: bridge 0000:00:0c.0 64bit mmio pref: [fd800000, fd8fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
tracer: 772 pages allocated for 65536 entries of 48 bytes
actual entries 65620
ACPI: RTC can wake from S4
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:01: ioport range 0x2000-0x207f has been reserved
system 00:01: ioport range 0x2080-0x20ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x290-0x30f has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
system 00:0d: iomem range 0xfeff0000-0xfeff00ff could not be reserved
system 00:0d: iomem range 0x37ee0000-0x37efffff could not be reserved
system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0x37edffff could not be reserved
system 00:0d: iomem range 0x38000000-0x3fffffff could not be reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0d: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0d: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0d: iomem range 0xfffed000-0xfffeffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: 0xb000-0xbfff
pci 0000:00:04.0: MEM window: 0xfd700000-0xfd7fffff
pci 0000:00:04.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xa000-0xafff
pci 0000:00:09.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:09.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: 0x9000-0x9fff
pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:0b.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: 0x8000-0x8fff
pci 0000:00:0c.0: MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:0c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [b000, bfff]
bus: 01 index 1 mmio: [fd700000, fd7fffff]
bus: 01 index 2 mmio: [fde00000, fdefffff]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffff]
bus: 02 index 0 io port: [a000, afff]
bus: 02 index 1 mmio: [fdd00000, fddfffff]
bus: 02 index 2 mmio: [fdc00000, fdcfffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [9000, 9fff]
bus: 03 index 1 mmio: [fdb00000, fdbfffff]
bus: 03 index 2 mmio: [fda00000, fdafffff]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [8000, 8fff]
bus: 04 index 1 mmio: [fd900000, fd9fffff]
bus: 04 index 2 mmio: [fd800000, fd8fffff]
bus: 04 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 7016, nTxLock = 56130
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Nov 20 2008 22:30:39) installed
msgmni has been set to 1754
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:0d.0: Boot video device
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: found MSI capability
pci_express 0000:00:09.0:pcie00: allocate port service
pci_express 0000:00:09.0:pcie03: allocate port service
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: found MSI capability
pci_express 0000:00:0b.0:pcie00: allocate port service
pci_express 0000:00:0b.0:pcie03: allocate port service
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: found MSI capability
pci_express 0000:00:0c.0:pcie00: allocate port service
pci_express 0000:00:0c.0:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xe0000000, mapped to 0xf8c80000, using 1536k, total 131072k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:d2a0
vesafb: pmi: set display start = c00cd2d6, set palette = c00cd340
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
amd74xx 0000:00:06.0: IDE port disabled
amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007
Probing IDE interface ide0...
hda: SAMSUNG SP0842N, ATA DISK drive
hdb: HL-DT-ST RW/DVD GCC-4521B, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdb: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.7-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.7-smp ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
isp1760 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
memory length for this resource is less than required
isp1760: probe of 0000:00:07.0 failed with error -12
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 958 MB/s
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
raid6: int32x