mhordus
(usa openSUSE)
Enviado em 02/06/2012 - 01:33h
como o driver não funcionou dei o comando dmesg para ver oque acontece...
nas ustimas linhas onde tem "boot.glfrx" exitem algums erros, parce ser algo relacionado ao kernel, alguma dica?
navy@linux-6pmu:~> dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1.2-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0)
[ 0.000000] Command line: root=/dev/disk/by-id/ata-ST31000524AS_6VPC1SBL-part6 resume=/dev/disk/by-id/ata-ST31000524AS_6VPC1SBL-part5 splash=silent quiet vga=0x31a
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7e90000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e90000 - 00000000c7ea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ea8000 - 00000000c7ed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ed0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b8000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A87TD/USB3, BIOS 1102 12/09/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1b8000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b8000000 aka 7040M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xc7e90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7e90000 page 4k
[ 0.000000] kernel direct mapping tables up to c7e90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b8000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 01b8000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b8000000 @ c7e8e000-c7e90000
[ 0.000000] RAMDISK: 37499000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fbad0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000c7e90100 0005C (v01 120910 XSDT2041 20101209 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7e90290 000F4 (v03 120910 FACP2041 20101209 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7e90450 0EA0C (v01 A1629 A1629000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000c7ea8000 00040
[ 0.000000] ACPI: APIC 00000000c7e90390 0007C (v01 120910 APIC2041 20101209 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7e90410 0003C (v01 120910 OEMMCFG 20101209 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ea8040 00072 (v01 120910 OEMB2041 20101209 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7e9f8a0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000c7e9f9b0 00038 (v01 120910 OEMHPET 20101209 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7e9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-c8000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-1b8000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,c8000000) -> [0,c8000000)
[ 0.000000] NUMA: Node 0 [0,c8000000) + [100000000,1b8000000) -> [0,1b8000000)
[ 0.000000] Initmem setup node 0 0000000000000000-00000001b8000000
[ 0.000000] NODE_DATA [00000001b7fec000 - 00000001b7ffffff]
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b1600000-ffff8801b6bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b8000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7e90
[ 0.000000] 0: 0x00100000 -> 0x001b8000
[ 0.000000] On node 0 totalpages: 1572383
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800456 pages, LIFO batch:31
[ 0.000000] Normal zone: 10304 pages used for memmap
[ 0.000000] Normal zone: 743360 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7e90000 - 00000000c7ea8000
[ 0.000000] PM: Registered nosave memory: 00000000c7ea8000 - 00000000c7ed0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ed0000 - 00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c7f00000 (gap: c7f00000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801b7c00000 s78208 r8192 d24192 u262144
[ 0.000000] pcpu-alloc: s78208 r8192 d24192 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1547738
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-ST31000524AS_6VPC1SBL-part6 resume=/dev/disk/by-id/ata-ST31000524AS_6VPC1SBL-part5 splash=silent quiet vga=0x31a
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ bc000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
[ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
[ 0.000000] Memory: 6041152k/7208960k available (5791k kernel code, 919428k absent, 248380k reserved, 7776k data, 940k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 50331648 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3210.834 MHz processor.
[ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.66 BogoMIPS (lpj=3210834)
[ 0.001005] pid_max: default: 32768 minimum: 301
[ 0.001037] Security Framework initialized
[ 0.001048] AppArmor: AppArmor initialized
[ 0.001514] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004263] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005365] Mount-cache hash table entries: 256
[ 0.005450] Initializing cgroup subsys cpuacct
[ 0.005453] Initializing cgroup subsys memory
[ 0.005467] Initializing cgroup subsys devices
[ 0.005468] Initializing cgroup subsys freezer
[ 0.005470] Initializing cgroup subsys net_cls
[ 0.005471] Initializing cgroup subsys blkio
[ 0.005476] Initializing cgroup subsys perf_event
[ 0.005496] tseg: 0000000000
[ 0.005503] CPU: Physical Processor ID: 0
[ 0.005504] CPU: Processor Core ID: 0
[ 0.005506] mce: CPU supports 6 MCE banks
[ 0.005512] using AMD E400 aware idle routine
[ 0.005930] ACPI: Core revision 20110623
[ 0.010304] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020354] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
[ 0.020998] Performance Events: AMD PMU driver.
[ 0.020998] ... version: 0
[ 0.020998] ... bit width: 48
[ 0.020998] ... generic registers: 4
[ 0.020998] ... value mask: 0000ffffffffffff
[ 0.020998] ... max period: 00007fffffffffff
[ 0.020998] ... fixed-purpose events: 0
[ 0.020998] ... event mask: 000000000000000f
[ 0.020998] System has AMD C1E enabled
[ 0.020998] Switch to broadcast mode on CPU0
[ 0.028305] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.036023] Booting Node 0, Processors #1
[ 0.036026] smpboot cpu 1: start_ip = 9a000
[ 0.107996] Switch to broadcast mode on CPU1
[ 0.108018] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.114027] #2
[ 0.114029] smpboot cpu 2: start_ip = 9a000
[ 0.186004] Switch to broadcast mode on CPU2
[ 0.186022] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.192020] #3
[ 0.192022] smpboot cpu 3: start_ip = 9a000
[ 0.264024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.264011] Switch to broadcast mode on CPU3
[ 0.270014] #4
[ 0.270016] smpboot cpu 4: start_ip = 9a000
[ 0.342016] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.342004] Switch to broadcast mode on CPU4
[ 0.348007] #5 Ok.
[ 0.348008] smpboot cpu 5: start_ip = 9a000
[ 0.419986] Switch to broadcast mode on CPU5
[ 0.420008] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.421981] Brought up 6 CPUs
[ 0.421984] Total of 6 processors activated (38528.99 BogoMIPS).
[ 0.423043] devtmpfs: initialized
[ 0.424827] PM: Registering ACPI NVS region at c7ea8000 (163840 bytes)
[ 0.424998] print_constraints: dummy:
[ 0.425018] RTC time: 1:05:37, date: 06/02/12
[ 0.425056] NET: Registered protocol family 16
[ 0.425139] node 0 link 0: io port [1000, ffffff]
[ 0.425142] TOM: 00000000c8000000 aka 3200M
[ 0.425143] Fam 10h mmconf [e0000000, efffffff]
[ 0.425145] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.425147] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.425149] node 0 link 0: mmio [a0000, bffff]
[ 0.425150] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.425152] TOM2: 00000001b8000000 aka 7040M
[ 0.425153] bus: [00, 07] on node 0 link 0
[ 0.425155] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.425157] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.425158] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.425160] bus: 00 index 3 [mem 0xc8000000-0xdfffffff]
[ 0.425161] bus: 00 index 4 [mem 0x1b8000000-0xfcffffffff]
[ 0.425168] Extended Config Space enabled on 1 nodes
[ 0.425245] ACPI: bus type pci registered
[ 0.425288] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.425290] PCI: not using MMCONFIG
[ 0.425291] PCI: Using configuration type 1 for base access
[ 0.425292] PCI: Using configuration type 1 for extended access
[ 0.426006] bio: create slab <bio-0> at 0
[ 0.426038] ACPI: Added _OSI(Module Device)
[ 0.426038] ACPI: Added _OSI(Processor Device)
[ 0.426038] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.426038] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.427215] ACPI: EC: Look up EC in DSDT
[ 0.428484] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.470475] ACPI: Interpreter enabled
[ 0.470479] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.470496] ACPI: Using IOAPIC for interrupt routing
[ 0.470514] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.471690] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.514402] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.514526] ACPI: No dock devices found.
[ 0.514527] HEST: Table not found.
[ 0.514529] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.514742] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.514905] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.514907] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.514909] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.514910] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.514912] pci_root PNP0A03:00: host bridge window [mem 0xc7f00000-0xdfffffff]
[ 0.514914] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.514953] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.514963] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.514988] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.515009] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.515011] pci 0000:00:02.0: PME# disabled
[ 0.515027] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[ 0.515047] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.515049] pci 0000:00:09.0: PME# disabled
[ 0.515059] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.515079] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.515080] pci 0000:00:0a.0: PME# disabled
[ 0.515102] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.515117] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.515124] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.515131] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.515138] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.515145] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.515152] pci 0000:00:11.0: reg 24: [mem 0xfe7fa000-0xfe7fa3ff]
[ 0.515166] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.515198] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.515208] pci 0000:00:12.0: reg 10: [mem 0xfe7f3000-0xfe7f3fff]
[ 0.515258] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.515272] pci 0000:00:12.2: reg 10: [mem 0xfe7fa400-0xfe7fa4ff]
[ 0.515321] pci 0000:00:12.2: supports D1 D2
[ 0.515322] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.515325] pci 0000:00:12.2: PME# disabled
[ 0.515340] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.515350] pci 0000:00:13.0: reg 10: [mem 0xfe7f8000-0xfe7f8fff]
[ 0.515403] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.515416] pci 0000:00:13.2: reg 10: [mem 0xfe7fa800-0xfe7fa8ff]
[ 0.515464] pci 0000:00:13.2: supports D1 D2
[ 0.515465] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.515468] pci 0000:00:13.2: PME# disabled
[ 0.515483] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.515532] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.515542] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.515548] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.515555] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.515562] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.515568] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.515594] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.515609] pci 0000:00:14.2: reg 10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
[ 0.515648] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.515651] pci 0000:00:14.2: PME# disabled
[ 0.515661] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.515713] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.515741] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.515750] pci 0000:00:14.5: reg 10: [mem 0xfe7f9000-0xfe7f9fff]
[ 0.515799] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.515837] pci 0000:00:15.0: supports D1 D2
[ 0.515857] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.515866] pci 0000:00:16.0: reg 10: [mem 0xfe7fb000-0xfe7fbfff]
[ 0.515915] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.515936] pci 0000:00:16.2: reg 10: [mem 0xfe7fac00-0xfe7facff]
[ 0.515993] pci 0000:00:16.2: supports D1 D2
[ 0.515994] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.515997] pci 0000:00:16.2: PME# disabled
[ 0.516012] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.516023] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.516033] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.516043] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.516055] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.516095] pci 0000:05:00.0: [1002:68be] type 0 class 0x000300
[ 0.516106] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.516115] pci 0000:05:00.0: reg 18: [mem 0xfe9e0000-0xfe9fffff 64bit]
[ 0.516120] pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff]
[ 0.516131] pci 0000:05:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.516145] pci 0000:05:00.0: supports D1 D2
[ 0.516162] pci 0000:05:00.1: [1002:aa58] type 0 class 0x000403
[ 0.516173] pci 0000:05:00.1: reg 10: [mem 0xfe9bc000-0xfe9bffff 64bit]
[ 0.516209] pci 0000:05:00.1: supports D1 D2
[ 0.517951] pci 0000:00:02.0: PCI bridge to [bus 05-05]
[ 0.517955] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.517957] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.517961] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.517997] pci 0000:04:00.0: [197b:2368] type 0 class 0x000101
[ 0.518020] pci 0000:04:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.518030] pci 0000:04:00.0: reg 14: [io 0xd880-0xd883]
[ 0.518040] pci 0000:04:00.0: reg 18: [io 0xd800-0xd807]
[ 0.518050] pci 0000:04:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.518059] pci 0000:04:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.518113] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.518120] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.518123] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.518155] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
[ 0.518168] pci 0000:03:00.0: reg 10: [mem 0xfe8fa000-0xfe8fbfff 64bit]
[ 0.518219] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.518222] pci 0000:03:00.0: PME# disabled
[ 0.519950] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.519955] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.520005] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.520012] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.520014] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.520015] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.520017] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.520019] pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff] (subtractive decode)
[ 0.520021] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.520074] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.520089] pci 0000:01:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.520114] pci 0000:01:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref]
[ 0.520130] pci 0000:01:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
[ 0.520174] pci 0000:01:00.0: supports D1 D2
[ 0.520175] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.520179] pci 0000:01:00.0: PME# disabled
[ 0.521953] pci 0000:00:15.0: PCI bridge to [bus 01-01]
[ 0.521958] pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
[ 0.521964] pci 0000:00:15.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.521981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.522171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.522206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.522239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.522275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.522344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.522461] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.522596] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.527910] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
[ 0.527991] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[ 0.528048] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 0.528104] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
[ 0.528149] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.528183] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.528217] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.528251] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.528299] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.528299] vgaarb: loaded
[ 0.528299] vgaarb: bridge control possible 0000:05:00.0
[ 0.528299] SCSI subsystem initialized
[ 0.528299] libata version 3.00 loaded.
[ 0.528299] usbcore: registered new interface driver usbfs
[ 0.528299] usbcore: registered new interface driver hub
[ 0.528299] usbcore: registered new device driver usb
[ 0.528299] PCI: Using ACPI for IRQ routing
[ 0.534787] PCI: pci_cache_line_size set to 64 bytes
[ 0.534792] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.534849] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.534851] reserve RAM buffer: 00000000c7e90000 - 00000000c7ffffff
[ 0.534918] NetLabel: Initializing
[ 0.534919] NetLabel: domain hash size = 128
[ 0.534919] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.534966] NetLabel: unlabeled traffic allowed by default
[ 0.534971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.534974] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.536955] Switching to clocksource hpet
[ 0.537872] Switched to NOHz mode on CPU #5
[ 0.537874] Switched to NOHz mode on CPU #0
[ 0.537879] Switched to NOHz mode on CPU #2
[ 0.537882] Switched to NOHz mode on CPU #1
[ 0.537886] Switched to NOHz mode on CPU #3
[ 0.537889] Switched to NOHz mode on CPU #4
[ 0.538838] AppArmor: AppArmor Filesystem Enabled
[ 0.538852] pnp: PnP ACPI init
[ 0.538861] ACPI: bus type pnp registered
[ 0.538955] pnp 00:00: [bus 00-ff]
[ 0.538957] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.538959] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.538961] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.538962] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.538964] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.538965] pnp 00:00: [mem 0xc7f00000-0xdfffffff window]
[ 0.538967] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.539012] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.596117] pnp 00:01: [dma 4]
[ 0.596120] pnp 00:01: [io 0x0000-0x000f]
[ 0.596121] pnp 00:01: [io 0x0081-0x0083]
[ 0.596122] pnp 00:01: [io 0x0087]
[ 0.596124] pnp 00:01: [io 0x0089-0x008b]
[ 0.596125] pnp 00:01: [io 0x008f]
[ 0.596126] pnp 00:01: [io 0x00c0-0x00df]
[ 0.596160] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.596170] pnp 00:02: [io 0x0070-0x0071]
[ 0.596176] pnp 00:02: [irq 8]
[ 0.596198] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.596205] pnp 00:03: [io 0x0061]
[ 0.596231] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.596237] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.596241] pnp 00:04: [irq 13]
[ 0.596262] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.596731] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.596734] pnp 00:05: [irq 4]
[ 0.596735] pnp 00:05: [dma 0 disabled]
[ 0.596796] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.596824] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.596846] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.596914] pnp 00:07: [io 0x0060]
[ 0.596915] pnp 00:07: [io 0x0064]
[ 0.596916] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.596918] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.596956] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.596957] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.596959] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.597121] pnp 00:08: [io 0x0010-0x001f]
[ 0.597122] pnp 00:08: [io 0x0022-0x003f]
[ 0.597123] pnp 00:08: [io 0x0062-0x0063]
[ 0.597125] pnp 00:08: [io 0x0065-0x006f]
[ 0.597126] pnp 00:08: [io 0x0072-0x007f]
[ 0.597127] pnp 00:08: [io 0x0080]
[ 0.597128] pnp 00:08: [io 0x0084-0x0086]
[ 0.597129] pnp 00:08: [io 0x0088]
[ 0.597130] pnp 00:08: [io 0x008c-0x008e]
[ 0.597132] pnp 00:08: [io 0x0090-0x009f]
[ 0.597133] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.597134] pnp 00:08: [io 0x00b1]
[ 0.597135] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.597136] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.597137] pnp 00:08: [io 0x040b]
[ 0.597138] pnp 00:08: [io 0x04d6]
[ 0.597139] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.597140] pnp 00:08: [io 0x0c14]
[ 0.597141] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.597143] pnp 00:08: [io 0x0c52]
[ 0.597144] pnp 00:08: [io 0x0c6c]
[ 0.597145] pnp 00:08: [io 0x0c6f]
[ 0.597146] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.597147] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.597148] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.597149] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.597150] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.597151] pnp 00:08: [io 0x0800-0x089f]
[ 0.597153] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.597154] pnp 00:08: [io 0x0b00-0x0b1f]
[ 0.597155] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.597156] pnp 00:08: [io 0x0900-0x090f]
[ 0.597157] pnp 00:08: [io 0x0910-0x091f]
[ 0.597159] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.597160] pnp 00:08: [io 0x0060]
[ 0.597161] pnp 00:08: [io 0x0064]
[ 0.597162] pnp 00:08: [mem 0xc7f00000-0xc7ffffff]
[ 0.597164] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.597165] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.597166] pnp 00:08: [mem 0xfed80000-0xfed80fff]
[ 0.597168] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.597234] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.597236] system 00:08: [io 0x040b] has been reserved
[ 0.597237] system 00:08: [io 0x04d6] has been reserved
[ 0.597239] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.597240] system 00:08: [io 0x0c14] has been reserved
[ 0.597242] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.597244] system 00:08: [io 0x0c52] has been reserved
[ 0.597245] system 00:08: [io 0x0c6c] has been reserved
[ 0.597247] system 00:08: [io 0x0c6f] has been reserved
[ 0.597248] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.597250] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.597251] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.597253] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.597255] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.597256] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.597258] system 00:08: [io 0x0b00-0x0b1f] has been reserved
[ 0.597259] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.597261] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.597263] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.597264] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.597267] system 00:08: [mem 0xc7f00000-0xc7ffffff] has been reserved
[ 0.597269] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.597271] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.597272] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.597274] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.597428] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.597429] pnp 00:09: [io 0x0230-0x023f]
[ 0.597431] pnp 00:09: [io 0x0290-0x029f]
[ 0.597432] pnp 00:09: [io 0x0f40-0x0f4f]
[ 0.597433] pnp 00:09: [io 0x0a30-0x0a3f]
[ 0.597468] system 00:09: [io 0x0230-0x023f] has been reserved
[ 0.597469] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.597471] system 00:09: [io 0x0f40-0x0f4f] has been reserved
[ 0.597473] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.597474] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.597501] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.597537] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.597539] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.597624] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.597626] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.597627] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.597628] pnp 00:0b: [mem 0x00100000-0xc7efffff]
[ 0.597630] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.597632] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.597635] pnp 00:0b: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.597637] pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.597639] pnp 00:0b: disabling [mem 0x00100000-0xc7efffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.597674] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.597675] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.597751] pnp: PnP ACPI: found 12 devices
[ 0.597752] ACPI: ACPI bus type pnp unregistered
[ 0.604250] PCI: max bus depth: 1 pci_try_num: 2
[ 0.604269] pci 0000:00:02.0: PCI bridge to [bus 05-05]
[ 0.604271] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.604273] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.604275] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.604278] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.604280] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.604284] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.604286] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.604289] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.604297] pci 0000:00:15.0: PCI bridge to [bus 01-01]
[ 0.604299] pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
[ 0.604303] pci 0000:00:15.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.604314] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.604317] pci 0000:00:02.0: setting latency timer to 64
[ 0.604323] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.604325] pci 0000:00:09.0: setting latency timer to 64
[ 0.604328] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.604329] pci 0000:00:0a.0: setting latency timer to 64
[ 0.604338] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.604341] pci 0000:00:15.0: setting latency timer to 64
[ 0.604343] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.604344] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.604346] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.604347] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.604349] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff]
[ 0.604350] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.604352] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.604353] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.604355] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.604356] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.604358] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.604359] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.604361] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.604362] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.604363] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.604365] pci_bus 0000:02: resource 8 [mem 0xc7f00000-0xdfffffff]
[ 0.604366] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.604368] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.604369] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.604501] NET: Registered protocol family 2
[ 0.604676] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.605777] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.607975] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.608263] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.608265] TCP reno registered
[ 0.608276] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.608322] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.608509] NET: Registered protocol family 1
[ 1.430136] pci 0000:05:00.0: Boot video device
[ 1.430168] PCI: CLS 64 bytes, default 64
[ 1.430206] Unpacking initramfs...
[ 1.560998] Freeing initrd memory: 11612k freed
[ 1.564805] PCI-DMA: Disabling AGP.
[ 1.564918] PCI-DMA: aperture base @ bc000000 size 65536 KB
[ 1.564919] PCI-DMA: using GART IOMMU.
[ 1.564922] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.570187] audit: initializing netlink socket (disabled)
[ 1.570200] type=2000 audit(1338599137.569:1): initialized
[ 1.595038] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.617562] VFS: Disk quotas dquot_6.5.2
[ 1.617596] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.617923] msgmni has been set to 11950
[ 1.618160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.618191] io scheduler noop registered
[ 1.618192] io scheduler deadline registered
[ 1.618220] io scheduler cfq registered (default)
[ 1.618357] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.618380] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.618474] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.618492] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 1.618573] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.618589] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.618659] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.618690] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 1.618778] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.618781] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.618782] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
[ 1.618785] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.618795] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 1.618796] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.618798] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 1.618808] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.618809] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.618811] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.618823] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.618824] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.618827] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.618878] vesafb: mode is 1280x1024x16, linelength=2560, pages=5
[ 1.618879] vesafb: scrolling: redraw
[ 1.618880] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.619271] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 5120k, total 16384k
[ 1.619414] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 1.619415] bootsplash: silentjpeg size 109002 bytes
[ 1.628981] bootsplash: ...found (1280x1024, 40442 bytes, v3).
[ 1.656489] Console: switching to colour frame buffer device 156x60
[ 1.682906] fb0: VESA VGA frame buffer device
[ 1.682944] ERST: Table is not found!
[ 1.682945] GHES: HEST is not enabled!
[ 1.683050] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.703568] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.844678] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.853330] Non-volatile memory driver v1.3
[ 1.853332] Linux agpgart interface v0.103
[ 1.853452] ahci 0000:00:11.0: version 3.0
[ 1.853468] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.853505] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[ 1.853565] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.853567] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.853940] scsi0 : ahci
[ 1.854057] scsi1 : ahci
[ 1.854104] scsi2 : ahci
[ 1.854151] scsi3 : ahci
[ 1.854230] ata1: SATA max UDMA/133 abar m1024@0xfe7fa000 port 0xfe7fa100 irq 44
[ 1.854233] ata2: SATA max UDMA/133 abar m1024@0xfe7fa000 port 0xfe7fa180 irq 44
[ 1.854235] ata3: SATA max UDMA/133 abar m1024@0xfe7fa000 port 0xfe7fa200 irq 44
[ 1.854237] ata4: SATA max UDMA/133 abar m1024@0xfe7fa000 port 0xfe7fa280 irq 44
[ 1.854330] Fixed MDIO Bus: probed
[ 1.854335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.854381] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.854392] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.854410] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.854419] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.854438] QUIRK: Enable AMD PLL fix
[ 1.854449] ehci_hcd 0000:00:12.2: debug port 1
[ 1.854467] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7fa400
[ 1.860070] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.860086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.860088] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.860090] usb usb1: Product: EHCI Host Controller
[ 1.860091] usb usb1: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
[ 1.860092] usb usb1: SerialNumber: 0000:00:12.2
[ 1.860199] hub 1-0:1.0: USB hub found
[ 1.860202] hub 1-0:1.0: 5 ports detected
[ 1.860329] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.860340] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.860348] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.860354] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.860370] ehci_hcd 0000:00:13.2: debug port 1
[ 1.860380] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe7fa800
[ 1.866078] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.866093] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.866094] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.866096] usb usb2: Product: EHCI Host Controller
[ 1.866097] usb usb2: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
[ 1.866098] usb usb2: SerialNumber: 0000:00:13.2
[ 1.866172] hub 2-0:1.0: USB hub found
[ 1.866175] hub 2-0:1.0: 5 ports detected
[ 1.866313] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.866325] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.866331] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.866337] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.866353] ehci_hcd 0000:00:16.2: debug port 1
[ 1.866363] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe7fac00
[ 1.872079] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.872092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.872093] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.872095] usb usb3: Product: EHCI Host Controller
[ 1.872096] usb usb3: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
[ 1.872097] usb usb3: SerialNumber: 0000:00:16.2
[ 1.872169] hub 3-0:1.0: USB hub found
[ 1.872172] hub 3-0:1.0: 4 ports detected
[ 1.872264] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.872322] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.872333] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.872340] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.872360] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe7f3000
[ 1.927096] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.927098] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.927099] usb usb4: Product: OHCI Host Controller
[ 1.927100] usb usb4: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
[ 1.927101] usb usb4: SerialNumber: 0000:00:12.0
[ 1.927184] hub 4-0:1.0: USB hub found
[ 1.927188] hub 4-0:1.0: 5 ports detected
[ 1.927320] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.927330] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.927336] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.927349] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7f8000
[ 1.982093] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.982095] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.982096] usb usb5: Product: OHCI Host Controller
[ 1.982097] usb usb5: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
[ 1.982098] usb usb5: SerialNumber: 0000:00:13.0
[ 1.982184] hub 5-0:1.0: USB hub found
[ 1.982188] hub 5-0:1.0: 5 ports detected
[ 1.982316] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.982326] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.982333] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.982347] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7f9000
[ 2.037093] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.037095] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.037096] usb usb6: Product: OHCI Host Controller
[ 2.037097] usb usb6: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
[ 2.037098] usb usb6: SerialNumber: 0000:00:14.5
[ 2.037181] hub 6-0:1.0: USB hub found
[ 2.037185] hub 6-0:1.0: 2 ports detected
[ 2.037309] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.037320] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.037326] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.037340] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe7fb000
[ 2.092104] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.092106] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.092108] usb usb7: Product: OHCI Host Controller
[ 2.092109] usb usb7: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
[ 2.092110] usb usb7: SerialNumber: 0000:00:16.0
[ 2.092194] hub 7-0:1.0: USB hub found
[ 2.092201] hub 7-0:1.0: 4 ports detected
[ 2.092273] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.092326] Initializing USB Mass Storage driver...
[ 2.092351] usbcore: registered new interface driver usb-storage
[ 2.092352] USB Mass Storage support registered.
[ 2.092358] usbcore: registered new interface driver ums-alauda
[ 2.092366] usbcore: registered new interface driver ums-cypress
[ 2.092372] usbcore: registered new interface driver ums-datafab
[ 2.092379] usbcore: registered new interface driver ums-freecom
[ 2.092386] usbcore: registered new interface driver ums-isd200
[ 2.092393] usbcore: registered new interface driver ums-jumpshot
[ 2.092399] usbcore: registered new interface driver ums-karma
[ 2.092406] usbcore: registered new interface driver ums-onetouch
[ 2.092413] usbcore: registered new interface driver ums-sddr09
[ 2.092419] usbcore: registered new interface driver ums-sddr55
[ 2.092426] usbcore: registered new interface driver ums-usbat
[ 2.092451] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.092809] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.092823] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.092959] mousedev: PS/2 mouse device common for all mice
[ 2.093068] rtc_cmos 00:02: RTC can wake from S4
[ 2.093149] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.093168] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.093175] cpuidle: using governor ladder
[ 2.093176] cpuidle: using governor menu
[ 2.093178] EFI Variables Facility v0.08 2004-May-17
[ 2.093328] usbcore: registered new interface driver usbhid
[ 2.093329] usbhid: USB HID core driver
[ 2.093491] TCP cubic registered
[ 2.093572] NET: Registered protocol family 10
[ 2.093919] lib80211: common routines for IEEE802.11 drivers
[ 2.093921] lib80211_crypt: registered algorithm 'NULL'
[ 2.093922] Registering the dns_resolver key type
[ 2.093934] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 2.094088] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST31000524AS_6VPC1SBL-part5
[ 2.159105] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.159131] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.314086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.314107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.315289] ata3.00: ATA-8: ST31000524AS, JC45, max UDMA/133
[ 2.315291] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.316696] ata3.00: configured for UDMA/133
[ 2.317083] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[ 2.320954] ata2.00: configured for UDMA/100
[ 2.329544] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5
[ 2.329734] scsi 2:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
[ 2.329850] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.329931] sd 2:0:0:0: [sda] Write Protect is off
[ 2.329934] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.329961] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.376541] sda: sda1 < sda5 sda6 sda7 > sda2 sda4
[ 2.376948] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.376960] PM: Hibernation image not present or could not be loaded.
[ 2.376972] registered taskstats version 1
[ 2.388949] Magic number: 0:763:52
[ 2.389080] rtc_cmos 00:02: setting system clock to 2012-06-02 01:05:39 UTC (1338599139)
[ 2.389103] usb 4-2: new low speed USB device number 2 using ohci_hcd
[ 2.390100] Freeing unused kernel memory: 940k freed
[ 2.390273] Write protecting the kernel read-only data: 12288k
[ 2.391164] Freeing unused kernel memory: 336k freed
[ 2.395412] Freeing unused kernel memory: 2020k freed
[ 2.417703] pata_jmicron 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.417725] pata_jmicron 0000:04:00.0: setting latency timer to 64
[ 2.417919] scsi4 : pata_jmicron
[ 2.417982] scsi5 : pata_jmicron
[ 2.418355] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 2.418357] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 2.534151] usb 4-2: New USB device found, idVendor=0566, idProduct=3016
[ 2.534154] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.542291] input: HID 0566:3016 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input0
[ 2.542375] generic-usb 0003:0566:3016.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3016] on usb-0000:00:12.0-2/input0
[ 2.548196] generic-usb: probe of 0003:0566:3016.0002 failed with error -22
[ 2.572072] Refined TSC clocksource calibration: 3210.746 MHz.
[ 2.572081] Switching to clocksource tsc
[ 2.721212] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.721231] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 2.721413] scsi6 : pata_atiixp
[ 2.721455] scsi7 : pata_atiixp
[ 2.721919] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.721920] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.775061] usb 4-3: new low speed USB device number 3 using ohci_hcd
[ 2.899660] udevd[159]: starting version 173
[ 2.907574] ACPI: acpi_idle registered with cpuidle
[ 2.907657] ACPI: processor limited to max C-state 1
[ 2.923110] usb 4-3: New USB device found, idVendor=093a, idProduct=2510
[ 2.923114] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.923116] usb 4-3: Product: USB OPTICAL MOUSE
[ 2.923117] usb 4-3: Manufacturer: PIXART
[ 2.932278] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input1
[ 2.932401] generic-usb 0003:093A:2510.0003: input,hidraw1: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0
[ 3.569444] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.569447] PM: Marking nosave pages: 00000000c7e90000 - 0000000100000000
[ 3.569913] PM: Marking nosave pages: 00000000bc000000 - 00000000c0000000
[ 3.570087] PM: Basic memory bitmaps created
[ 3.584904] PM: Basic memory bitmaps freed
[ 3.680923] PM: Starting manual resume from disk
[ 3.680925] PM: Hibernation image partition 8:5 present
[ 3.680926] PM: Looking for hibernation image.
[ 3.686337] PM: Image not found (code -22)
[ 3.686339] PM: Hibernation image not present or could not be loaded.
[ 3.791260] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.955673] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr
[ 4.469118] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 4.747682] systemd[1]: Set hostname to <linux-6pmu.site>.
[ 5.742312] systemd-readahead-replay[391]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 8.401044] udevd[403]: starting version 173
[ 9.994735] boot.localnet[406]: Using boot-specified hostname 'linux-6pmu.site'
[ 9.994741] boot.localnet[406]: Setting up hostname 'linux-6pmu'..done
[ 10.668946] boot.localnet[406]: Setting up loopback interface RTNETLINK answers: File exists
[ 10.669905] boot.localnet[406]: ..done
[ 16.541297] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 16.541657] ACPI: Power Button [PWRB]
[ 16.541699] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 16.541731] ACPI: Power Button [PWRF]
[ 16.542859] wmi: Mapper loaded
[ 16.544498] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 16.544535] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 16.544538] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 16.544550] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[ 16.544668] xhci_hcd 0000:03:00.0: irq 18, io mem 0xfe8fa000
[ 16.544708] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 16.544713] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 16.544717] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 16.544721] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 16.544725] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 16.544729] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[ 16.544732] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[ 16.544808] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.544810] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.544811] usb usb8: Product: xHCI Host Controller
[ 16.544813] usb usb8: Manufacturer: Linux 3.1.0-1.2-desktop xhci_hcd
[ 16.544814] usb usb8: SerialNumber: 0000:03:00.0
[ 16.544890] xHCI xhci_add_endpoint called for root hub
[ 16.544891] xHCI xhci_check_bandwidth called for root hub
[ 16.544913] hub 8-0:1.0: USB hub found
[ 16.544919] hub 8-0:1.0: 2 ports detected
[ 16.544973] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 16.544977] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[ 16.546057] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.546060] ALSA hda_intel.c:2415 Using LPIB position fix
[ 16.548033] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 16.548034] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.548036] usb usb9: Product: xHCI Host Controller
[ 16.548037] usb usb9: Manufacturer: Linux 3.1.0-1.2-desktop xhci_hcd
[ 16.548038] usb usb9: SerialNumber: 0000:03:00.0
[ 16.548135] xHCI xhci_add_endpoint called for root hub
[ 16.548136] xHCI xhci_check_bandwidth called for root hub
[ 16.548153] hub 9-0:1.0: USB hub found
[ 16.548160] hub 9-0:1.0: 2 ports detected
[ 16.553096] ALSA hda_intel.c:1492 Enable sync_write for stable communication
[ 16.554408] ATK0110 ATK0110:00: EC enabled
[ 16.560870] scsi 1:0:0:0: Attached scsi generic sg0 type 5
[ 16.560905] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 16.563034] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 16.563054] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.563086] r8169 0000:01:00.0: setting latency timer to 64
[ 16.563135] r8169 0000:01:00.0: irq 52 for MSI/MSI-X
[ 16.564577] ALSA hda_codec.c:4877 autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 16.564579] ALSA hda_codec.c:4881 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.564582] ALSA hda_codec.c:4885 hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 16.564583] ALSA hda_codec.c:4886 mono: mono_out=0x0
[ 16.564585] ALSA hda_codec.c:4889 dig-out=0x20/0x21
[ 16.564586] ALSA hda_codec.c:4890 inputs:
[ 16.564588] ALSA hda_codec.c:4894 Rear Mic=0x1a
[ 16.564589] ALSA hda_codec.c:4894 Front Mic=0x1e
[ 16.564591] ALSA hda_codec.c:4894 Line=0x1b
[ 16.564592] ALSA hda_codec.c:4896
[ 16.568535] MCE: In-kernel MCE decoding enabled.
[ 16.570091] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xffffc9001179e000, bc:ae:c5:66:2f:84, XID 0c100000 IRQ 52
[ 16.570572] EDAC MC: Ver: 2.1.0
[ 16.571958] AMD64 EDAC driver v3.4.0
[ 16.572491] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 16.572494] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 16.572658] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 16.574035] snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 16.574039] ALSA hda_intel.c:2415 Using LPIB position fix
[ 16.574094] snd_hda_intel 0000:05:00.1: irq 53 for MSI/MSI-X
[ 16.574112] snd_hda_intel 0000:05:00.1: setting latency timer to 64
[ 16.574506] mtp-probe[547]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2"
[ 16.574778] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 16.575701] mtp-probe[548]: checking bus 4, device 3: "/sys/devices/pci0000:00/0000:00:12.0/usb4/4-3"
[ 16.576041] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 16.576348] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 16.576394] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 16.577077] EDAC amd64: DRAM ECC disabled.
[ 16.577084] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.577085] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.577086] (Note that use of the override may cause unknown side effects.)
[ 16.579042] ALSA hda_intel.c:1492 Enable sync_write for stable communication
[ 16.581999] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 16.582529] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input5
[ 16.611396] ifup[645]: Service network not started and mode 'auto' -> skipping
[ 16.692152] boot.lvm[651]: Waiting for udev to settle...
[ 16.838279] mtp-probe[547]: bus: 4, device: 2 was not an MTP device
[ 16.838286] mtp-probe[548]: bus: 4, device: 3 was not an MTP device
[ 18.658283] boot.lvm[651]: Scanning for LVM volume groups...
[ 18.667117] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr
[ 18.667921] Adding 2103292k swap on /dev/sda5. Priority:0 extents:1 across:2103292k
[ 18.741271] systemd-fsck[696]: /dev/sda7: clean, 3318/17661952 files, 3838126/70635520 blocks
[ 18.765787] fuse init (API version 7.17)
[ 18.795208] mount[711]: mount: fusectl já montado ou /sys/fs/fuse/connections ocupado
[ 18.795416] mount[711]: mount: de acordo com mtab, fusectl já está montado em /sys/fs/fuse/connections
[ 18.795610] systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32
[ 19.080088] boot.lvm[651]: No volume groups found
[ 19.081733] device-mapper: uevent: version 1.0.3
[ 19.081805] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 19.082115] boot.lvm[651]: No volume groups found
[ 19.118927] boot.lvm[651]: Reading all physical volumes. This may take a while...
[ 19.119149] boot.lvm[651]: Activating LVM volume groups...
[ 19.185998] boot.lvm[651]: No volume groups found
[ 19.201786] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 19.506301] boot.lvm[651]: ..done
[ 19.607876] ntfs-3g[726]: Version 2011.4.12 integrated FUSE 27
[ 19.607883] ntfs-3g[726]: Mounted /dev/sda4 (Read-Write, label "", NTFS 3.1)
[ 19.607886] ntfs-3g[726]: Cmdline options: rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dmask=022,locale=pt_BR.UTF-8
[ 19.607891] ntfs-3g[726]: Mount options: rw,noexec,nosuid,nodev,users,allow_other,nonempty,atime,fsname=/dev/sda4,blkdev,blksize=4096,default_permissions
[ 19.607895] ntfs-3g[726]: Global ownership and permissions enforced, configuration type 1
[ 19.607898] ntfs-3g[726]: Warning : using problematic uid==0 and gid!=0
[ 19.731255] ntfs-3g[727]: Version 2011.4.12 integrated FUSE 27
[ 19.731265] ntfs-3g[727]: Mounted /dev/sda2 (Read-Write, label "", NTFS 3.1)
[ 19.731269] ntfs-3g[727]: Cmdline options: rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dmask=022,locale=pt_BR.UTF-8
[ 19.731273] ntfs-3g[727]: Mount options: rw,noexec,nosuid,nodev,users,allow_other,nonempty,atime,fsname=/dev/sda2,blkdev,blksize=4096,default_permissions
[ 19.731277] ntfs-3g[727]: Global ownership and permissions enforced, configuration type 1
[ 19.731280] ntfs-3g[727]: Warning : using problematic uid==0 and gid!=0
[ 19.774136] boot.fglrxrebuild[728]: Check for rebuild the fglrx kernel module if necessary ...
[ 19.779327] boot.fglrxrebuild[728]: The fglrx kernel module does not exist! I build it NOW. Please wait ...
[ 20.614254] boot.fglrxrebuild[728]: FATAL: The fglrx kernel module could not be built!
[ 20.645235] boot.fglrxrebuild[728]: Check for the fglrx kernel module is running...
[ 20.647892] boot.fglrxrebuild[728]: The fglrx kernel module is not loaded! Try it to modprobe now ...
[ 20.648944] boot.fglrxrebuild[728]: FATAL: Module fglrx not found.
[ 20.651631] boot.fglrxrebuild[728]: FATAL: The fglrx kernel module could not loaded!
[ 20.651948] boot.fglrxrebuild[728]: ..failed
[ 20.652265] systemd[1]: fglrxrebuild.service: control process exited, code=exited status=1
[ 20.669111] systemd[1]: Unit fglrxrebuild.service entered failed state.
[ 20.785476] logger[920]: Requesting microcode for AMD fam10h or newer CPU(s)
[ 20.786875] microcode: CPU0: patch_level=0x010000bf
[ 20.802980] microcode: CPU1: patch_level=0x010000bf
[ 20.804137] microcode: CPU2: patch_level=0x010000bf
[ 20.805232] microcode: CPU3: patch_level=0x010000bf
[ 20.806359] microcode: CPU4: patch_level=0x010000bf
[ 20.807484] microcode: CPU5: patch_level=0x010000bf
[ 20.808639] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 20.809025] microcode.ctl[903]: Checking/updating CPU microcode .. AMD fam10h or newer CPU(s) found..done
[ 20.813739] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00)
[ 20.813748] powernow-k8: Core Performance Boosting: on.
[ 20.813780] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 20.813781] powernow-k8: 1 : pstate 1 (2400 MHz)
[ 20.813782] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 20.813783] powernow-k8: 3 : pstate 3 (800 MHz)
[ 20.818528] cpufreq[905]: Loading CPUFreq modules..done
[ 20.845628] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.854899] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 20.857185] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.914348] SuSEfirewall2[1000]: Firewall rules set to CLOSE.
[ 20.915610] SuSEfirewall2_init[930]: Loading basic firewall rules ..done
[ 21.329427] systemd[1]: NetworkManager.service: control process exited, code=exited status=1
[ 21.337099] systemd[1]: Job NetworkManager-wait-online.service/start failed with result 'dependency'.
[ 21.337109] systemd[1]: Unit NetworkManager.service entered failed state.
[ 22.488548] bootsplash: status on
